Misplaced Pages

#457542

95-510: In North America, where the majority of surface coal mining occurs, this method began to be used in the mid-16th century and is practiced throughout the world in the mining of many different minerals. In North America, surface mining gained popularity throughout the 20th century, and surface mines now produce most of the coal mined in the United States . In most forms of surface mining, heavy equipment , such as earthmovers, first remove

190-478: A "pit", and above-ground mining structures are referred to as a " pit head ". In Australia , "colliery" generally refers to an underground coal mine. Coal mining has had many developments in recent years, from the early days of men tunneling, digging, and manually extracting the coal on carts to large open-cut and longwall mines. Mining at this scale requires the use of draglines , trucks, conveyors , hydraulic jacks , and shearers. The coal mining industry has

285-428: A "relatively new semi-surface and semi-underground coal mining method that evolved from auger mining". In highwall mining, the coal seam is penetrated by a continuous miner propelled by a hydraulic pushbeam transfer mechanism (PTM). A typical cycle includes sumping (launch-pushing forward) and shearing (raising and lowering the cutterhead boom to cut the entire height of the coal seam). As the coal recovery cycle continues,

380-705: A 70% increase over the 20 years since 1999. In 2018, the world production of brown coal (lignite) was 803.2 Mt, with Germany the world's largest producer at 166.3 Mt. China is most likely the second largest producer and consumer of lignite globally although specific lignite production data is not made available. Coal production has grown fastest in Asia, while Europe has declined. Since 2011, world coal production has been stable, with decreases in Europe and US offset by increases from China, Indonesia and Australia. The top coal mining nations are: Energy production from coal mining

475-608: A bonus, a promotion, and other strategic information, and letters of recommendation." Community engagement has been proven to counteract the most negative attributes of poverty and a high amount of social capital has been shown to reduce crime. "Social connectedness matters to our lives in the most profound way." -Robert Putnam. Robert Putnam reports, in the chapter Health and Happiness from his book Bowling Alone , that recent public research shows social connection impacts all areas of human health, this includes psychological and physical aspects of human health. Putnam says "...beyond

570-467: A coal seam occurring near the top of a ridge or hill, the entire top is removed in a series of parallel cuts. Overburden is deposited in nearby valleys and hollows. This method usually leaves the ridge and hilltops as flattened plateaus. The process is highly controversial for the drastic changes in topography, the practice of creating head-of-hollow-fills , or filling in valleys with mining debris, and for covering streams and disrupting ecosystems. Spoil

665-433: A controlled water-inflow pump system and/or a gas (inert) venting system. Recovery with tunneling shape of drives used by highwall miners is much better than round augering holes, but the mapping of areas that have been developed by a highwall miner are not mapped as rigorously as deep mined areas. Very little soil is displaced in contrast with mountaintop removal; however, it is comparatively more expensive to own and operate

760-551: A doubt that social connectedness is one of the most powerful determinates of our well being." In particular it is face to face connections which have been shown to have greater impacts then non-face to face relationships. Specific health benefits of strong social relationships are a decrease in the likelihood of: seasonal viruses, heart attacks, strokes, cancer, depression, and premature death of all sorts. There are online initiatives to improve local communities like LOCAL (www.localchange.com). Sustainability in community programs

855-405: A fourth of the world's energy. Coal extraction methods vary depending on whether the mine is an underground mine or a surface (also called an open cast) mine. Additionally, coal seam thickness and geology are factors in the selection of a mining method. The most economical method of coal extraction for surface mines is the electric shovel or drag line. The most economical form of underground mining

950-403: A greater proportion of the coal deposit than underground methods, as more of the coal seams in the strata may be exploited. This equipment can include the following: Draglines which operate by removing the overburden, power shovels, large trucks in which transport overburden and coal, bucket wheel excavators, and conveyors. In this mining method, explosives are first used in order to break through

1045-437: A highwall miner. Mapping of the outcrop, as well as core hole data and samples taken during the bench-making process, are taken into account to best project the panels that the highwall miner will cut. Obstacles that could be potentially damaged by subsidence and the natural contour of the highwall mine are taken into account, and a surveyor points the highwall miner in a line (theoretical survey plot-line) mostly perpendicular to

SECTION 10

#1732791187458

1140-440: A land use condition is not equal to the original use. Existing land uses (such as livestock grazing, crop and timber production) are temporarily eliminated in mining areas. High-value, intensive-land-use areas like urban and transportation systems are not usually affected by mining operations. If mineral values are sufficient, these improvements may be removed to an adjacent area. Strip mining eliminates existing vegetation, destroys

1235-497: A large area. As each long strip is excavated, the overburden is placed in the excavation produced by the previous strip. Contour mining involves removing the overburden above the mineral seam near an outcrop in hilly terrain, where the mineral outcrop usually follows the contour of the land. Contour stripping is often followed by auger mining into the hillside, to remove more of the mineral. This method commonly leaves behind terraces in mountainsides. Open-pit mining refers to

1330-440: A large dining-room table, but with hydraulic jacks for legs. After the large pillars of coal have been mined away, the mobile roof support's legs shorten and it is withdrawn to a safe area. The mine roof typically collapses once the mobile roof supports leave an area. There are six principal methods of underground mining: Coal is mined commercially in over 50 countries. 7,921 million metric tons (Mt) of coal were produced in 2019,

1425-559: A long history of significant negative environmental impacts on local ecosystems, health impacts on local communities and workers, and contributes heavily to the global environmental crises, such as poor air quality and climate change . For these reasons, coal has been one of the first fossil fuels to be phased out of various parts of the global energy economy . The major coal producing countries, though, such as China , Indonesia, India and Australia , have not reached peak production, with production increases replacing falls in Europe and

1520-481: A method of extracting rock or minerals from the earth through their removal from an open pit or borrow . This process is done on the ground surface of the earth It is best suited for accessing mostly vertical deposits of minerals. Although open-pit mining is sometimes mistakenly referred to as "strip mining", the two methods are different (see above). Mountaintop removal mining (MTR) is a form of coal mining that mines coal seams beneath mountaintops by first removing

1615-447: A method that currently accounts for about 60 percent of world coal production. In deep mining, the room and pillar or bord and pillar method progresses along the seam, while pillars and timber are left standing to support the mine roof. Once room and pillar mines have been developed to a stopping point limited by geology, ventilation, or economics, a supplementary version of room and pillar mining, termed second mining or retreat mining ,

1710-782: A much flatter topography. Economic development attempts on reclaimed mine sites include prisons such the Big Sandy Federal Penitentiary in Martin County, Kentucky , small-town airports, golf courses such as Twisted Gun in Mingo County, West Virginia and Stonecrest Golf Course in Floyd County, Kentucky , as well as industrial scrubber sludge disposal sites, solid waste landfills, trailer parks, explosive manufacturers, and storage rental lockers. This method has been increasingly used in recent years in

1805-448: A new coal mine. Local community A local community has been defined as a group of interacting people living in a common location. The word is often used to refer to a group that is organized around common values and is attributed with social cohesion within a shared geographical location, generally in social units larger than a household. The word can also refer to the national community or global community. The word "community"

1900-474: A number of effects on the local environment. The negative effects involve soil, water, air, and noise pollution as well as landscape alteration and various other negatives. However, new technology and proper management can make it easier to properly treat the local water supply and restore the local ecology which helps rebuild the environment. Each type of surface mining has its own environmental impact, as laid out below. Strip mining - Once operations have ended,

1995-401: A once operational surface mine requires a large sum of money and extensive environmental remediation . These remediation projects can continue on for years after the mine is closed. In some cases, the mining companies go bankrupt leaving abandoned mines with no funding for remediation. In other cases, mining companies are unwilling to pay for remediation, meaning litigation or regulatory action

SECTION 20

#1732791187458

2090-504: A region of the United States with numerous endemic species . Erosion also increases, which can intensify flooding . In the eastern United States, the Appalachian Regional Reforestation Initiative works to promote the use of trees in mining reclamation. Dredging is a method for mining below the water table. It is mostly associated with gold mining. Small dredges often use suction to bring

2185-506: A region where flat land is rare. They also maintain that the new growth on reclaimed mountaintop mined areas is better able to support populations of game animals. Critics contend that mountaintop removal is a disastrous practice that benefits a small number of corporations at the expense of local communities and the environment . A U.S. Environmental Protection Agency (EPA) environmental impact statement finds that streams near valley fills sometimes may contain higher levels of minerals in

2280-589: A result of occupational exposures is coined occupational hearing loss . To protect miners' hearing, the US Mine Safety and Health Administration 's (MSHA) guidelines for noise place a Permissible Exposure Limit (PEL) for noise at 90 dBA time-weighted over 8 hours. A lower cutoff, 85 dBA, is set for a worker to fall into the MSHA Action Level which dictates that workers be placed into hearing conservation programs. Noise exposures vary depending on

2375-409: A social unit…. The individual is helpless socially, if left to himself…. If he comes into contact with neighbor, and they with other neighbors, there will be an accumulation of social capital, which may immediately satisfy his social needs and which may bear a social potentiality sufficient to the substantial improvement of living conditions in the whole community. The community as a whole will benefit by

2470-450: Is a health hazard. Although MTR sites are required to be reclaimed after mining is complete, reclamation has traditionally focused on stabilizing rock and controlling erosion, but not always on reforesting the area. Quick-growing, non-native grasses, planted to quickly provide vegetation on a site, compete with tree seedlings, and trees have difficulty establishing root systems in compacted backfill. Consequently, biodiversity suffers in

2565-575: Is accomplished by drilling holes into the overburden, filling the holes with explosives, and detonating the explosive. The overburden is then removed, using large earth-moving equipment, such as draglines , shovel and trucks, excavator and trucks, or bucket-wheels and conveyors. This overburden is put into the previously mined (and now empty) strip. When all the overburden is removed, the underlying coal seam will be exposed (a 'block' of coal). This block of coal may be drilled and blasted (if hard) or otherwise loaded onto trucks or conveyors for transport to

2660-427: Is commonly started. Miners remove the coal in the pillars, thereby recovering as much coal from the coal seam as possible. A work area involved in pillar extraction is called a pillar section. Modern pillar sections use remote-controlled equipment, including large hydraulic mobile roof-supports, which can prevent cave-ins until the miners and their equipment have left a work area. The mobile roof supports are similar to

2755-418: Is dedicated to mining activities until it can be reshaped and reclaimed. If mining is allowed, resident human populations must be resettled off the mine site; economic activities, such as agriculture or hunting and gathering food and medicinal plants are interrupted. What becomes of the land surface after mining is determined by the manner in which the mining is conducted. Usually reclamation of disturbed lands to

2850-664: Is derived from the Old French communité which is derived from the Latin communitas ( cum , "with/together" and munus , "gift"), a broad term for fellowship or organized society. A sense of community refers to people's perception of interconnection and interdependence , shared responsibility , and common goals . Understanding a community entails having knowledge of community needs and resources, having respect for community members, and involving key community members in programs. The author Robert Putnam refers to

2945-516: Is highly concentrated in certain jurisdictions, which also concentrates much of the social and economic impacts of the industry to these regions. The industry directly employs over seven million workers worldwide, which, in turn, creates millions of indirect jobs. In several parts of the world, producers have reached peak coal as some economies shift away from fossil fuels to address climate change. A 2020 study found that renewables jobs could feasibly be created in these geographies to replace many of

Surface mining - Misplaced Pages Continue

3040-578: Is lacking. Putnam reports that the first use of the social capital theory was by L. J. Hanifan , a practical reformer during the Progressive Era in the United States of America. The following description of social capital is a quote from L.J. Hanifan in Putnam's Book: Those tangible substances [that] count for most in the daily lives of people: namely good will, fellowship, sympathy, and social intercourse among individuals and families who make up

3135-484: Is mostly used to generate electricity, and 75% of annual coal production is exported, mostly to eastern Asia. In 2007, 428 million tonnes of coal was mined in Australia. In 2007, coal provided about 85% of Australia's electricity production. In the fiscal year 2008/09, 487 million tonnes of coal was mined, and 261 million tonnes was exported. In the fiscal year 2013/14, 430.9 million tonnes of coal

3230-538: Is necessary to compel the companies to commit funds to remediate. These legal issues often delay remediation and the environment is negatively affected. In the United States, when the company does not exist anymore or is otherwise unable to clean the site, special taxes on hazardous waste producers (i.e. the Environmental Protection Agency Superfund ) can be used to fund remediation projects. Coal mining Coal mining

3325-417: Is partially economically recoverable. Coal refuse is distinct from the byproducts of burning coal, such as fly ash . Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage . The runoff can create both surface and groundwater contamination. The piles also create a fire hazard, with

3420-593: Is placed at the head of a narrow, steep-sided valley or hollow. In preparation for filling this area, vegetation and soil are removed and a rock drain constructed down the middle of the area to be filled, where a natural drainage course previously existed. When the fill is completed, this underdrain will form a continuous water runoff system from the upper end of the valley to the lower end of the fill. Typical head-of-hollow fills are graded and terraced to create permanently stable slopes. Most coal seams are too deep underground for opencast mining and require underground mining,

3515-436: Is referred to as 'overburden' and is removed in long strips. The overburden from the first strip is deposited in an area outside the planned mining area and referred to as out-of-pit dumping. Overburden from subsequent strips is deposited in the void left from mining the coal and overburden from the previous strip. This is referred to as in-pit dumping. It is often necessary to fragment the overburden by use of explosives. This

3610-457: Is regulated by state and local laws, which may vary widely. The National Environmental Policy Act (NEPA), Resource Conservation and Recovery Act (RCRA), Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and many more laws deal with the subject of surface mining. In some cases, even with proper legislation in place for surface mining some negative human health and environmental impacts remain. Surface mining can have

3705-515: Is removed and overburden dumped to the side. Dust, vibration, and diesel exhaust odors are created (affecting sight, sound, and smell). Residents of local communities often find such impacts disturbing or unpleasant. In case of mountaintop removal , tops are removed from mountains or hills to expose thick coal seams underneath. The soil and rock removed is deposited in nearby valleys, hollows and depressions, resulting in blocked (and contaminated) waterways. Removal of soil and rock overburden covering

3800-712: Is still common, with 4,000 new cases of black lung every year in the US (4 percent of workers annually) and 10,000 new cases every year in China (0.2 percent of workers). The use of water sprays in mining equipment reduces the risk to miners' lungs. Build-ups of a hazardous gas are known as damps, possibly from the German word Dampf which means steam or vapor: Noise is also a contributing factor to potential adverse effects on coal miners' health. Exposure to excessive noise can lead to noise-induced hearing loss . Hearing loss developed as

3895-518: Is the capacity of programs (services designed to meet the needs of community members) to continuously respond to community issues. A sustained program maintains a focus consonant with its original goals and objectives, including the individuals , families , and communities it was originally intended to serve. Programs change regarding the breadth and depth of their programming. Some become aligned with other organizations and established institutions, whereas others maintain their independence. Understanding

Surface mining - Misplaced Pages Continue

3990-464: Is the long wall, which involves using two spinning drums with carbide bits that runs along sections of the coal seam. Many coals extracted from both surface and underground mines require washing in a coal preparation plant . Technical and economic feasibility are evaluated based on the following: regional geological conditions; overburden characteristics; coal seam continuity, thickness, structure, quality, and depth; strength of materials above and below

4085-470: Is the process of extracting coal from the ground or from a mine. Coal is valued for its energy content and since the 1880s has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. In the United Kingdom and South Africa , a coal mine and its structures are a colliery , a coal mine is called

4180-435: Is used for both thermal and metallurgical coals . In New South Wales open casting for steam coal and anthracite is practiced. Surface mining accounts for around 80 percent of production in Australia, while in the US it is used for about 67 percent of production. Globally, about 40 percent of coal production involves surface mining. Strip mining exposes coal by removing earth above each coal seam. This earth to be removed

4275-482: Is very sensitive and vulnerable to drastic and harmful changes within their ecosystem. Highwall mining - Has a lower environmental impact than mountaintop removal because of the smaller external surface area present but there are still negative side effects. Air and noise pollution from blasting are common environmental effects along with the large tailing piles, which can leach into waterways and numerous ecosystems. Properly cleaning, restoring, and removing hazards from

4370-466: The Appalachian coal fields of West Virginia , Kentucky , Virginia , and Tennessee in the United States. The profound changes in topography and disturbance of pre-existing ecosystems have made mountaintop removal highly controversial. Advocates of mountaintop removal point out that once the areas are reclaimed as mandated by law, the technique provides premium flat land suitable for many uses in

4465-491: The Industrial Revolution , and coal provided the main source of primary energy for industry and transportation in industrial areas from the 18th century to the 1950s. Coal remains an important energy source. Coal is also mined today on a large scale by open pit methods wherever the coal strata strike the surface or are relatively shallow. Britain developed the main techniques of underground coal mining from

4560-591: The tailings are placed back into the hole and covered up to make the site resemble the landscape before the mining operation. This process involves the removal of all ground vegetation in the area, which is a detriment to the environment. Topsoil may be placed over the tailing along with planting trees and other vegetation. Another reclamation method involves filling in the hole with water to create an artificial lake. Large tailing piles left behind may contain heavy metals which can leach out acids such as lead and copper and enter into water systems. Open-pit mining - One of

4655-407: The value which comes from social networks as social capital in his book Bowling Alone: The Collapse and Revival of American Community. He writes that social capital "makes an enormous difference in our lives", that "a society characterized by generalized reciprocity is more efficient that a distrustful society" and that economic sociologists have shown a minimized economic wealth if social capital

4750-812: The U.S., Examples include the Sago Mine disaster of 2006, and the 2007 mine accident in Utah 's Crandall Canyon Mine , where nine miners were killed and six entombed. In the decade 2005–2014, US coal mining fatalities averaged 28 per year. The most fatalities during the 2005–2014 decade were 48 in 2010, the year of the Upper Big Branch Mine disaster in West Virginia, which killed 29 miners. Chronic lung diseases, such as pneumoconiosis (black lung) were once common in miners, leading to reduced life expectancy . In some mining countries black lung

4845-624: The US Department of Labor's Mine Safety and Health Administration (MSHA) show that between 1990 and 2004, the industry cut the rate of injuries by more than half and fatalities by two-thirds. But according to the Bureau of Labor Statistics , even in 2006, mining remained the second most dangerous occupation in America, when measured by fatality rate . These numbers, however, include all mining activities, and oil and gas mining contribute to

SECTION 50

#1732791187458

4940-610: The United States and proposed mines under development. The coal mining industry employs almost 2.7 million workers. The History of coal mining goes back thousands of years, with early mines documented in ancient China, the Roman Empire and other early historical economies. It became important in the Industrial Revolution of the 19th and 20th centuries, when it was primarily used to power steam engines, heat buildings and generate electricity. Coal mining continues as an important economic activity today, but has begun to decline due to

5035-581: The coal mining jobs as part of a just transition ; however, renewable energy was not suitable in some of the geographies with high concentrations of miners, such as in China, which is far and away the leading coal-mining nation. Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob ) is the material left over from coal mining, usually as tailings piles or spoil tips . For every tonne of hard coal generated by mining, 400 kg (880 lb) of waste material remains, which includes some lost coal that

5130-497: The coal preparation (or wash) plant. Once this strip is empty of coal, the process is repeated with a new strip being created next to it. This method is most suitable for areas with flat terrain. Equipment to be used depends on geological conditions. For example, to remove overburden that is loose or unconsolidated, a bucket wheel excavator might be the most productive. The life of some area mines may be more than 50 years. The contour mining method consists of removing overburden from

5225-863: The coal resource may cause burial and loss of topsoil, exposes parent material, and creates large infertile wastelands. Soil disturbance and associated compaction result in conditions conducive to erosion. Soil removal from the area to be surface-mined alters or destroys many natural soil characteristics, and reduces its biodiversity and productivity for agriculture. Soil structure may be disturbed by pulverization or aggregate breakdown. Top 10 hard and brown coal producers in 2012 were (in million metric tons): China 3,621, United States 922, India 629, Australia 432, Indonesia 410, Russia 351, South Africa 261, Germany 196, Poland 144, and Kazakhstan 122. Coal has been mined in every state of Australia, but mainly in Queensland, New South Wales and Victoria. It

5320-696: The coal seam, and today's models are capable of going farther, with the support of gyro navigation and not limited anymore by the amount of cable stored on the machine. The maximum depth would be determined by the stress of further penetration and associated specific-power draw (torsion and tension in screw transporters string), but today's optimized screw-transporters conveying embodiments (called pushbeams) with visual product development and discrete element modeling (DEM) using flow simulation behavior software shows smart-drive extended penetrations are possible, even so under steep inclined angles from horizontal to more than 30 degree downhole. In case of significant steep mining

5415-429: The cooperation of all its parts, while the individual will find in his associations the advantages of the help, sympathy, and fellowship of his neighbors. Putnam reported that many studies have shown that the highest predictor of job satisfaction is the presence of social connection in the workplace . He writes that "people with friends at work are happier at work." And that "social networks provide people with advice,

5510-567: The cutterhead is progressively launched into the coal seam for 19.72 feet (6.01 m). Then, the PTM automatically inserts a 19.72-foot-long (6.01 m) rectangular pushbeam (screw-conveyor segment) into the center section of the machine between the Powerhead and the cutterhead. The pushbeam system can penetrate nearly 1,200 feet (370 m) (proven in 2015 till today) into the coal seam. One patented highwall mining system uses augers enclosed inside

5605-429: The developed world. Modern coal mining in the US has an average 23 deaths per year due to mine accidents (2001–2020). However, in lesser developed countries and some developing countries, many miners continue to die annually, either through direct accidents in coal mines or through adverse health consequences from working under poor conditions. China , in particular, has the highest number of coal mining related deaths in

5700-455: The disruptive activities of blasting, ripping, and excavating coal. Stripping of overburden eliminates and destroys archeological and historic features, unless they are removed beforehand. The removal of vegetative cover and activities associated with the construction of haul roads, stockpiling of topsoil, displacement of overburden and hauling of soil and coal increase the quantity of dust around mining operations. Dust degrades air quality in

5795-425: The environmental impacts are primarily found underwater. The method of extracting material from the seafloor or any water body leads to the harmful risk of marine life. Overall, the effect are far less compared to the other mining methods. The influx of sediment can bury flora and fauna, change water levels and can alter the oxygen content. Water and noise pollution is a concern that must be monitored because marine life

SECTION 60

#1732791187458

5890-571: The fatalities occurring in the first half of the 20th century. 3,242 died in 1907, the worst year ever; in 2020 there were five. Open cut hazards are principally mine wall failures and vehicle collisions; underground mining hazards include suffocation, gas poisoning, roof collapse, rock burst , outbursts , and gas explosions. Firedamp explosions can trigger the far more dangerous coal dust explosions, which can engulf an entire mine. Most of these risks are greatly reduced in modern mines, and multiple fatality incidents are now rare in most parts of

5985-457: The genetic soil profile, displaces or destroys wildlife and habitat, alters current land uses, and to some extent permanently changes the general topography of the area mined. Adverse impacts on geological features of human interest may occur in a coal strip mine. Geomorphic and geophysical features and outstanding scenic resources may be sacrificed by indiscriminate mining. Paleontological, cultural, and other historic values may be endangered due to

6080-500: The highwall. parallel lines represent the drive cut into the mountain (up to 1,200 feet (370 m) deep (2015 records), without heading or corrective steering actuation on a navigation azimuth during mining results in missing a portion of the coal seam and is a potential danger of cutting in pillars from previous mined drives due to horizontal drift (roll) of the pushbeam-cuttermodule string. Recently highwall miners have penetrated more than 1,200 feet (370 m) (2015 ongoing records into

6175-450: The immediate area, has an adverse impact on vegetative life, and constitutes health and safety hazards for mine workers and nearby residents. Surface mining disrupts virtually all aesthetic elements of the landscape. Alteration of land forms often imposes unfamiliar and discontinuous configurations. New linear patterns appear as material is extracted and waste piles are developed. Different colors and textures are exposed as vegetative cover

6270-460: The late 18th century onward, with further progress being driven by 19th-century and early 20th-century progress. However, oil and gas were increasingly used as alternatives from the 1860s onward. By the late 20th century, coal was, for the most part, replaced in domestic as well as industrial and transportation usage by oil , natural gas or electricity produced from oil, gas, nuclear power or renewable energy sources. By 2010, coal produced over

6365-461: The loose sediment in a pond of its own making. Highwall mining is another form of mining sometimes conducted to recover additional coal adjacent to a surface-mined area. The method evolved from auger mining but does not meet the definition of surface mining since it does not involve the removal of overburden to expose the coal seam. CERB final report No. 2014-004 "Highwall Mining: Design Methodology, Safety, and Suitability" by Yi Luo characterizes it as

6460-404: The majority of fatalities. Coal mining resulted in 47 fatalities that year. One study, though, has suggested that hazards of modern mining are now more accretive with workers facing long-term health impacts, such as sleep deprivation, that build up over time. Strip mining severely alters the landscape, which reduces the value of the natural environment in the surrounding land. The land surface

6555-461: The method of extraction. For example, a study has found that among surface coal mine operations, dragline equipment produced the loudest sound at a range of 88–112 dBA. Within longwall sections, stageloaders used to transport coal from the mining face and shearers used for extraction represent some of the highest noise exposures. Auxiliary fans (up to 120 dBA), continuous mining machines (up to 109 dBA), and roof bolters (up to 103 dBA) represent some of

6650-439: The mined material up from the bottom of a water body. Historical large-scale dredging operations often used a floating dredge; a barge-like vessel that scoops material up through a conveyor belt on the bow, filters out the desired component on board, and returns the unwanted material to the water via another conveyor belt on the stern. In gravel-filled river valleys with shallow water tables, a floating dredge can work its way through

6745-465: The mining workforce. in 2015 US coal mines had 65,971 employees, the lowest figure since EIA began collecting data in 1978. However, a 2016 study reported that a relatively minor investment would allow most coal workers to retrain for the solar energy industry. Coal mining has been a very dangerous activity and the list of historical coal mining disasters is long. In the U.S., 104,895 coal miners were killed in mine accidents since 1900, 90 percent of

6840-415: The mountaintop overlying the coal seam. Explosives are used to break up the overburden (rock layers above the seam), which is then removed. The overburden is then dumped by haul trucks into fills in nearby hollows or valleys. MTR involves the mass restructuring of earth in order to reach coal seams as deep as 400 feet (120 m) below the surface. Mountaintop removal replaces the original steep landscape with

6935-448: The new mining method phrase should be "directional mining" (commonly used technologies as valuable synergy directional drilling and directional mining are categorized in "surface to in-seam" (SIS) techniques), dry or wet, dewatering is developed or cutting and dredging through screw transporters are proactive in developing a roadmap of the leading global highwall mining engineering company. Historically, moving materials out of surface mines

7030-469: The noisiest equipment within continuous mining sections. Exposures to noise exceeding 90 dBA can lead to adverse effects on workers' hearing. The use of administrative controls and engineering controls can be used to reduce noise exposures. Improvements in mining methods (e.g. longwall mining), hazardous gas monitoring (such as safety-lamps or more modern electronic gas monitors), gas drainage, electrical equipment , and ventilation have reduced many of

7125-590: The open pit methods, due to thickness of the seam 20–25 metres (60–90 feet). Coals occurring below 90 m (300 ft) are usually deep mined. However, there are open pit mining operations working on coal seams up to 300–460 metres (1,000–1,500 feet) below ground level, for instance Tagebau Hambach in Germany. When coal seams are near the surface, it may be economical to extract the coal using open-cut , also referred to as open-cast, open-pit, mountaintop removal or strip, mining methods. Opencast coal mining recovers

7220-421: The operation reaches a predetermined stripping ratio (tons of overburden/tons of coal), it is not profitable to continue. Depending on the equipment available, it may not be technically feasible to exceed a certain height of highwall. At this point, it is possible to produce more coal with the augering method in which spiral drills bore tunnels into a highwall laterally from the bench to extract coal without removing

7315-416: The ore body to be excavated is relatively near the surface and/or is mostly horizontal. This type of mining uses some of the largest machines on earth, including bucket-wheel excavators which can move as much as 12,000 cubic meters (16,000 cu. yd.) of earth per hour. There are two forms of strip mining. The more common method is area stripping , which is used on fairly flat terrain, to extract deposits over

7410-408: The overburden. Mountaintop coal mining is a surface mining practice involving removal of mountaintops to expose coal seams, and disposing of associated mining overburden in adjacent "valley fills." Valley fills occur in steep terrain where there are limited disposal alternatives. Mountaintop removal mining combines area and contour strip mining methods. In areas with rolling or steep terrain with

7505-542: The overburden. Next, large machines, such as dragline excavators or bucket-wheel excavators , extract the mineral. Advantages of surface mining include lower cost and greater safety compared to underground mining. Disadvantages include hazards to human health and the environment. Humans face a variety of health risks caused by mining such as different cardiovascular diseases, food, and water contamination. Habitat destruction , alongside air, noise, and water pollution, are all significant negative environmental impacts caused by

7600-425: The potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses. The use of sophisticated sensing equipment to monitor air quality is common and has replaced the use of small animals such as canaries, often referred to as " miner's canaries ". In the United States, the increase in technology has significantly decreased

7695-534: The pushbeam that prevent the mined coal from being contaminated by rock debris during the conveyance process. Using a video imaging and/or a gamma-ray sensor and/or other geo-radar systems like a coal-rock interface detection sensor (CID), the operator can see ahead projection of the seam-rock interface and guide the continuous miner's progress. Highwall mining can produce thousands of tons of coal in contour-strip operations with narrow benches, previously mined areas, trench mine applications, and steep-dip seams by utilizing

7790-399: The risks of rock falls, explosions, and unhealthy air quality. Gases released during the mining process can be recovered to generate electricity and improve worker safety with gas engines . Another innovation in recent years is the use of closed circuit escape respirators , respirators that contain oxygen for situations where mine ventilation is compromised. Statistical analyses performed by

7885-418: The seam for roof and floor conditions; topography, especially altitude and slope; climate; land ownership as it affects the availability of land for mining and access; surface drainage patterns; groundwater conditions; availability of labor and materials; coal purchaser requirements in terms of tonnage, quality, and destination; and capital investment requirements. Surface mining and deep underground mining are

7980-565: The seam in a pattern following the contours along a ridge or around the hillside. This method is most commonly used in areas with rolling to steep terrain. It was once common to deposit the spoil on the downslope side of the bench thus created, but this method of spoil disposal consumed much additional land and created severe landslide and erosion problems. To alleviate these problems, a variety of methods were devised to use freshly cut overburden to refill mined-out areas. These haul-back or lateral movement methods generally consist of an initial cut with

8075-403: The side effects of surface mining. There are five main types of surface mining as detailed below. Strip mining is the practice of mining a seam of mineral, by first removing a long strip of overlying soil and rock (the overburden ); this activity is also referred to as overburden removal . It is most commonly used to mine coal and lignite (brown coal) . Strip mining is only practical when

8170-432: The spoil deposited downslope or at some other site and spoil from the second cut refilling the first. A ridge of undisturbed natural material 15 to 20 ft (5 to 6 m) wide is often intentionally left at the outer edge of the mined area. This barrier adds stability to the reclaimed slope by preventing spoil from slumping or sliding downhill. The limitations of contour strip mining are both economic and technical. When

8265-556: The strong contribution coal plays in global warming and environmental issues, which result in decreasing demand and in some geographies, peak coal . Compared to wood fuels , coal yields a higher amount of energy per unit mass, specific energy or massic energy, and can often be obtained in areas where wood is not readily available. Though it was used historically as a domestic fuel, coal is now used mostly in industry, especially in smelting and alloy production, as well as electricity generation . Large-scale coal mining developed during

8360-476: The surface or overburden, of the mining area. The overburden is then removed by draglines or by shovel and truck. Once the coal seam is exposed, it is drilled, fractured and thoroughly mined in strips. The coal is then loaded onto large trucks or conveyors for transport to either the coal preparation plant or directly to where it will be used. Most open cast mines in the United States extract bituminous coal . In Canada, Australia, and South Africa, open cast mining

8455-524: The two basic methods of mining. The choice of mining method depends primarily on depth, density, overburden, and thickness of the coal seam; seams relatively close to the surface, at depths less than approximately 55 m (180 ft), are usually surface mined. Coal that occurs at depths of 55 to 90 m (180 to 300 ft) are usually deep mined, but in some cases surface mining techniques can be used. For example, some western U.S. coal that occur at depths in excess of 60 m (200 ft) are mined by

8550-571: The waste rock of which is used to flatten out the surrounding land by infilling rivers and valleys. This is very destructive as it physically permanently alters the landscape and the associated ecosystem. Throughout the Appalachians in states such as Kentucky and Virginia, mountaintop removal is a common mining method where whole forests are cleared and the area becomes vulnerable to possible landslides, with restoration sometimes being too difficult/costly. Dredging - A form of surface mining where

8645-415: The water and decreased aquatic biodiversity . The statement also estimates that 724 miles (1,165 km) of Appalachian streams were buried by valley fills from 1985 to 2001. Blasting at a mountaintop removal mine expels dust and fly-rock into the air, which can then disturb or settle onto private property nearby. This dust may contain sulfur compounds, which some claim corrode structures and tombstones and

8740-403: The world's largest types of mine and the size of these operations leave behind massive landscape scars, destruction to environmental habitats, and substantial clean-up cost. An open-pit mine can yield an enormous quantity of waste rock, sinkholes can form down the road, flooding and similar negative impacts as strip mining. Mountaintop removal mining - Involves the removal of whole mountaintops,

8835-441: The world, with official statistics claiming that 6,027 deaths occurred in 2004. To compare, 28 deaths were reported in the U.S. in the same year. Coal production in China is twice that in the US, while the number of coal miners is around 50 times that of the US, making deaths in coal mines in China 4 times as common per worker (108 times as common per unit output) as in the US. Mine disasters have still occurred in recent years in

8930-529: Was accomplished through manual labor, horse-drawn vehicles, and/or mining railways. Current practices tend to use haul trucks on haul roads designed into the features of the mine. Federal governments have imposed multiple laws and regulations which mining companies have to strictly follow. In the United States, the Surface Mining Control and Reclamation Act of 1977 mandates reclamation of surface coal mines. Reclamation for non-coal mines

9025-531: Was mined, and 375.1 million tonnes was exported. In 2013/14, coal provided about 69% of Australia's electricity production. In 2013, Australia was the world's fifth-largest coal producer, after China, the United States, India, and Indonesia. However, in terms of proportion of production exported, Australia is the world's second largest coal exporter, as it exports roughly 73% of its coal production. Indonesia exports about 87% of its coal production. A court in Australia has cited climate change in ruling against

#457542