Misplaced Pages

#5994

63-501: The Percival Lakes form a string of S-shaped ephemeral salt lakes in the north of Western Australia . They lie at the southern region of the Great Sandy Desert and east of Karlamilyi National Park . They stretch in an east-west direction for 350 km (220 mi) and north-south for 160 km (99 mi). The surface elevation is 256 m (840 ft). The Canning Stock Route runs in close proximity to some of

126-435: A magnetic field , possibly to the point of behaving like a solid. The viscous forces that arise during fluid flow are distinct from the elastic forces that occur in a solid in response to shear, compression, or extension stresses. While in the latter the stress is proportional to the amount of shear deformation, in a fluid it is proportional to the rate of deformation over time. For this reason, James Clerk Maxwell used

189-454: A pressure difference between the two ends of the tube) is needed to sustain the flow. This is because a force is required to overcome the friction between the layers of the fluid which are in relative motion. For a tube with a constant rate of flow, the strength of the compensating force is proportional to the fluid's viscosity. In general, viscosity depends on a fluid's state, such as its temperature, pressure, and rate of deformation. However,

252-436: A constant viscosity ( non-Newtonian fluids ) cannot be described by a single number. Non-Newtonian fluids exhibit a variety of different correlations between shear stress and shear rate. One of the most common instruments for measuring kinematic viscosity is the glass capillary viscometer. In coating industries, viscosity may be measured with a cup in which the efflux time is measured. There are several sorts of cup—such as

315-571: A crucial role as a keystone species by regulating phytoplankton and bacterioplankton levels. The Artemia species also serves as an intermediate host for helminth parasites that affect migratory water birds like flamingos, grebes, gulls, shorebirds, and ducks. Vertebrates in saline lakes include certain fish and bird species, though they are sensitive to fluctuations in salinity. Many saline lakes are also alkaline, which imposes physiological challenges for fish, especially in managing nitrogenous waste excretion. Fish species vary by lake; for instance,

378-506: A fluid, just as thermal conductivity characterizes heat transport, and (mass) diffusivity characterizes mass transport. This perspective is implicit in Newton's law of viscosity, τ = μ ( ∂ u / ∂ y ) {\displaystyle \tau =\mu (\partial u/\partial y)} , because the shear stress τ {\displaystyle \tau } has units equivalent to

441-415: A momentum flux , i.e., momentum per unit time per unit area. Thus, τ {\displaystyle \tau } can be interpreted as specifying the flow of momentum in the y {\displaystyle y} direction from one fluid layer to the next. Per Newton's law of viscosity, this momentum flow occurs across a velocity gradient, and the magnitude of the corresponding momentum flux

504-416: A specific fluid state. To standardize comparisons among experiments and theoretical models, viscosity data is sometimes extrapolated to ideal limiting cases, such as the zero shear limit, or (for gases) the zero density limit. Transport theory provides an alternative interpretation of viscosity in terms of momentum transport: viscosity is the material property which characterizes momentum transport within

567-664: Is 1 cP divided by 1000 kg/m^3, close to the density of water. The kinematic viscosity of water at 20 °C is about 1 cSt. The most frequently used systems of US customary, or Imperial , units are the British Gravitational (BG) and English Engineering (EE). In the BG system, dynamic viscosity has units of pound -seconds per square foot (lb·s/ft ), and in the EE system it has units of pound-force -seconds per square foot (lbf·s/ft ). The pound and pound-force are equivalent;

630-457: Is a linear combination of the shear and bulk viscosities that describes the reaction of a solid elastic material to elongation. It is widely used for characterizing polymers. In geology , earth materials that exhibit viscous deformation at least three orders of magnitude greater than their elastic deformation are sometimes called rheids . Viscosity is measured with various types of viscometers and rheometers . Close temperature control of

693-462: Is a calculation derived from tests performed on drilling fluid used in oil or gas well development. These calculations and tests help engineers develop and maintain the properties of the drilling fluid to the specifications required. Nanoviscosity (viscosity sensed by nanoprobes) can be measured by fluorescence correlation spectroscopy . The SI unit of dynamic viscosity is the newton -second per square meter (N·s/m ), also frequently expressed in

SECTION 10

#1732765666006

756-550: Is a viscosity tensor that maps the velocity gradient tensor ∂ v k / ∂ r ℓ {\displaystyle \partial v_{k}/\partial r_{\ell }} onto the viscous stress tensor τ i j {\displaystyle \tau _{ij}} . Since the indices in this expression can vary from 1 to 3, there are 81 "viscosity coefficients" μ i j k l {\displaystyle \mu _{ijkl}} in total. However, assuming that

819-499: Is called ideal or inviscid . For non-Newtonian fluid 's viscosity, there are pseudoplastic , plastic , and dilatant flows that are time-independent, and there are thixotropic and rheopectic flows that are time-dependent. The word "viscosity" is derived from the Latin viscum (" mistletoe "). Viscum also referred to a viscous glue derived from mistletoe berries. In materials science and engineering , there

882-532: Is called the rate of shear deformation or shear velocity , and is the derivative of the fluid speed in the direction parallel to the normal vector of the plates (see illustrations to the right). If the velocity does not vary linearly with y {\displaystyle y} , then the appropriate generalization is: where τ = F / A {\displaystyle \tau =F/A} , and ∂ u / ∂ y {\displaystyle \partial u/\partial y}

945-450: Is defined scientifically as a force multiplied by a time divided by an area. Thus its SI units are newton-seconds per square meter, or pascal-seconds. Viscosity quantifies the internal frictional force between adjacent layers of fluid that are in relative motion. For instance, when a viscous fluid is forced through a tube, it flows more quickly near the tube's center line than near its walls. Experiments show that some stress (such as

1008-448: Is determined by the viscosity. The analogy with heat and mass transfer can be made explicit. Just as heat flows from high temperature to low temperature and mass flows from high density to low density, momentum flows from high velocity to low velocity. These behaviors are all described by compact expressions, called constitutive relations , whose one-dimensional forms are given here: where ρ {\displaystyle \rho }

1071-565: Is easy to visualize and define in a simple shearing flow, such as a planar Couette flow . In the Couette flow, a fluid is trapped between two infinitely large plates, one fixed and one in parallel motion at constant speed u {\displaystyle u} (see illustration to the right). If the speed of the top plate is low enough (to avoid turbulence), then in steady state the fluid particles move parallel to it, and their speed varies from 0 {\displaystyle 0} at

1134-540: Is equal to the SI millipascal second (mPa·s). The SI unit of kinematic viscosity is square meter per second (m /s), whereas the CGS unit for kinematic viscosity is the stokes (St, or cm ·s = 0.0001 m ·s ), named after Sir George Gabriel Stokes . In U.S. usage, stoke is sometimes used as the singular form. The submultiple centistokes (cSt) is often used instead, 1 cSt = 1 mm ·s  = 10  m ·s . 1 cSt

1197-576: Is in terms of the standard (scalar) viscosity μ {\displaystyle \mu } and the bulk viscosity κ {\displaystyle \kappa } such that α = κ − 2 3 μ {\displaystyle \alpha =\kappa -{\tfrac {2}{3}}\mu } and β = γ = μ {\displaystyle \beta =\gamma =\mu } . In vector notation this appears as: where δ {\displaystyle \mathbf {\delta } }

1260-585: Is influenced by processes such as evaporation and deposition. Salt lakes face serious conservation challenges due to climate change, pollution and water diversion. The primary method of classification for salt lakes involves assessing the chemical composition of the water within the lakes, specifically its salinity, pH , and the dominant ions present. Subsaline lakes have a salinity lower than that of seawater but higher than freshwater , typically ranging from 0.5 to 3 grams per liter (g/L). Hyposaline lakes exhibit salinities from 0.5 to 3 g/L, which allows for

1323-658: Is not a fundamental law of nature, but rather a constitutive equation (like Hooke's law , Fick's law , and Ohm's law ) which serves to define the viscosity μ {\displaystyle \mu } . Its form is motivated by experiments which show that for a wide range of fluids, μ {\displaystyle \mu } is independent of strain rate. Such fluids are called Newtonian . Gases , water , and many common liquids can be considered Newtonian in ordinary conditions and contexts. However, there are many non-Newtonian fluids that significantly deviate from this behavior. For example: Trouton 's ratio

SECTION 20

#1732765666006

1386-501: Is not limited to the Aral Sea; salt lakes around the world are shrinking due to excessive water diversion, dam construction, pollution, urbanization, and rising temperatures associated with climate change. The resulting declines cause severe disruptions to local ecosystems and biodiversity, degrades the environment, threatens economic stability, and displaces communities dependent on these lakes for resources and livelihood. In Utah, if

1449-496: Is often interest in understanding the forces or stresses involved in the deformation of a material. For instance, if the material were a simple spring, the answer would be given by Hooke's law , which says that the force experienced by a spring is proportional to the distance displaced from equilibrium. Stresses which can be attributed to the deformation of a material from some rest state are called elastic stresses. In other materials, stresses are present which can be attributed to

1512-588: Is the dynamic viscosity of the fluid, often simply referred to as the viscosity . It is denoted by the Greek letter mu ( μ ). The dynamic viscosity has the dimensions ( m a s s / l e n g t h ) / t i m e {\displaystyle \mathrm {(mass/length)/time} } , therefore resulting in the SI units and the derived units : The aforementioned ratio u / y {\displaystyle u/y}

1575-408: Is the density, J {\displaystyle \mathbf {J} } and q {\displaystyle \mathbf {q} } are the mass and heat fluxes, and D {\displaystyle D} and k t {\displaystyle k_{t}} are the mass diffusivity and thermal conductivity. The fact that mass, momentum, and energy (heat) transport are among

1638-425: Is the local shear velocity. This expression is referred to as Newton's law of viscosity . In shearing flows with planar symmetry, it is what defines μ {\displaystyle \mu } . It is a special case of the general definition of viscosity (see below), which can be expressed in coordinate-free form. Use of the Greek letter mu ( μ {\displaystyle \mu } ) for

1701-611: Is the ratio of extensional viscosity to shear viscosity . For a Newtonian fluid, the Trouton ratio is 3. Shear-thinning liquids are very commonly, but misleadingly, described as thixotropic. Viscosity may also depend on the fluid's physical state (temperature and pressure) and other, external , factors. For gases and other compressible fluids , it depends on temperature and varies very slowly with pressure. The viscosity of some fluids may depend on other factors. A magnetorheological fluid , for example, becomes thicker when subjected to

1764-554: Is the unit tensor. This equation can be thought of as a generalized form of Newton's law of viscosity. The bulk viscosity (also called volume viscosity) expresses a type of internal friction that resists the shearless compression or expansion of a fluid. Knowledge of κ {\displaystyle \kappa } is frequently not necessary in fluid dynamics problems. For example, an incompressible fluid satisfies ∇ ⋅ v = 0 {\displaystyle \nabla \cdot \mathbf {v} =0} and so

1827-589: The Zahn cup and the Ford viscosity cup —with the usage of each type varying mainly according to the industry. Also used in coatings, a Stormer viscometer employs load-based rotation to determine viscosity. The viscosity is reported in Krebs units (KU), which are unique to Stormer viscometers. Vibrating viscometers can also be used to measure viscosity. Resonant, or vibrational viscometers work by creating shear waves within

1890-459: The deformation rate over time . These are called viscous stresses. For instance, in a fluid such as water the stresses which arise from shearing the fluid do not depend on the distance the fluid has been sheared; rather, they depend on how quickly the shearing occurs. Viscosity is the material property which relates the viscous stresses in a material to the rate of change of a deformation (the strain rate). Although it applies to general flows, it

1953-425: The density of the fluid ( ρ ). It is usually denoted by the Greek letter nu ( ν ): and has the dimensions ( l e n g t h ) 2 / t i m e {\displaystyle \mathrm {(length)^{2}/time} } , therefore resulting in the SI units and the derived units : In very general terms, the viscous stresses in a fluid are defined as those resulting from

Percival Lakes - Misplaced Pages Continue

2016-431: The shear viscosity . However, at least one author discourages the use of this terminology, noting that μ {\displaystyle \mu } can appear in non-shearing flows in addition to shearing flows. In fluid dynamics, it is sometimes more appropriate to work in terms of kinematic viscosity (sometimes also called the momentum diffusivity ), defined as the ratio of the dynamic viscosity ( μ ) over

2079-491: The BG and EE systems. Nonstandard units include the reyn (lbf·s/in ), a British unit of dynamic viscosity. In the automotive industry the viscosity index is used to describe the change of viscosity with temperature. The reciprocal of viscosity is fluidity , usually symbolized by ϕ = 1 / μ {\displaystyle \phi =1/\mu } or F = 1 / μ {\displaystyle F=1/\mu } , depending on

2142-474: The Great Salt Lake is not conserved, the state could face potential economic and public health crises, with consequences for air quality, local agriculture, and wildlife. According to “Utah’s Great Salt Lake Strike Team”, in order increase the lake's level within the next 30 years, see average inflows must increase by 472,00 acre-feet per year, which is about a 33% increase in the amount that has reached

2205-489: The Salton Sea is home to species such as carp, striped mullet, humpback sucker, and rainbow trout. Stratification in salt lakes occurs as a result of the unique chemical and environmental processes that cause water to separate into layers based on density . In these lakes, high rates of evaporation often concentrate salts, leading to denser, saltier water sinking to the lake's bottom, while fresher water remains nearer

2268-425: The bottom to u {\displaystyle u} at the top. Each layer of fluid moves faster than the one just below it, and friction between them gives rise to a force resisting their relative motion. In particular, the fluid applies on the top plate a force in the direction opposite to its motion, and an equal but opposite force on the bottom plate. An external force is therefore required in order to keep

2331-602: The convention used, measured in reciprocal poise (P , or cm · s · g ), sometimes called the rhe . Fluidity is seldom used in engineering practice. At one time the petroleum industry relied on measuring kinematic viscosity by means of the Saybolt viscometer , and expressing kinematic viscosity in units of Saybolt universal seconds (SUS). Other abbreviations such as SSU ( Saybolt seconds universal ) or SUV ( Saybolt universal viscosity ) are sometimes used. Kinematic viscosity in centistokes can be converted from SUS according to

2394-438: The dependence on some of these properties is negligible in certain cases. For example, the viscosity of a Newtonian fluid does not vary significantly with the rate of deformation. Zero viscosity (no resistance to shear stress ) is observed only at very low temperatures in superfluids ; otherwise, the second law of thermodynamics requires all fluids to have positive viscosity. A fluid that has zero viscosity (non-viscous)

2457-1029: The diversity of life, primarily supporting specialized organisms such as halophilic bacteria and certain species of brine shrimp . These lakes can have high concentrations of sodium salts and minerals, such as lithium, making such lakes vulnerable to mining interests. Hypersaline lakes can be found in the McMurdo Dry Valleys in Antarctica, where salinity can reach ≈440‰. Salt lakes form through complex chemical, geological, and biological processes, influenced by environmental conditions like high evaporation rates and restricted water outflow. As water carrying dissolved minerals ( sodium , potassium , and magnesium ) enters these basins, it gradually evaporates, concentrating these minerals until they precipitate as salt deposits. Then, specific ions interact under controlled temperatures, which leads to solid-solution formation and salt crystal deposition within

2520-465: The dynamic viscosity (sometimes also called the absolute viscosity ) is common among mechanical and chemical engineers , as well as mathematicians and physicists. However, the Greek letter eta ( η {\displaystyle \eta } ) is also used by chemists, physicists, and the IUPAC . The viscosity μ {\displaystyle \mu } is sometimes also called

2583-457: The equivalent forms pascal - second (Pa·s), kilogram per meter per second (kg·m ·s ) and poiseuille (Pl). The CGS unit is the poise (P, or g·cm ·s = 0.1 Pa·s), named after Jean Léonard Marie Poiseuille . It is commonly expressed, particularly in ASTM standards, as centipoise (cP). The centipoise is convenient because the viscosity of water at 20 °C is about 1 cP, and one centipoise

Percival Lakes - Misplaced Pages Continue

2646-459: The fluid is essential to obtain accurate measurements, particularly in materials like lubricants, whose viscosity can double with a change of only 5 °C. A rheometer is used for fluids that cannot be defined by a single value of viscosity and therefore require more parameters to be set and measured than is the case for a viscometer. For some fluids, the viscosity is constant over a wide range of shear rates ( Newtonian fluids ). The fluids without

2709-479: The lack of vertical mixing. Extremophiles , including specific bacteria and archaea , inhabit the hypersaline and oxygen-deficient zones at lower depths. Bacteria and archaea, for example, rely on alternative metabolic processes that do not depend on oxygen. These microorganisms play a critical role in nutrient cycling within salt lakes, as they break down organic material and release by-products that support other microbial communities. Due to limited biodiversity,

2772-400: The lake bed. This cycle of evaporation and deposition is the main process to the unique saline environment that characterizes a salt lake. Environmental factors further shape the composition and formation of salt lakes. Seasonal variations in temperature and evaporation drive mineral saturation and promote salt crystallization . In dry regions, water loss during warmer seasons concentrates

2835-428: The lake in recent years. Water conservation is viewed as being the most cost-effective and practical strategy to save salt lakes like the Great Salt Lake. Implementing strong water management policies, improving community awareness, and ensuring the return of water flow to these lakes are additional ways that may restore ecological balance. Other proposed methods of maintaining lake levels include cloud seeding and

2898-475: The lake's chemistry, supporting only specialized microbial life adapted to extreme environments with high salinity and low oxygen levels. The restricted vertical mixing limits nutrient cycling , creating a favorable ecosystem for halophiles (salt-loving organisms) that rely on these saline conditions for stability and balance. The extreme conditions within stratified salt lakes have a profound effect on aquatic life , as oxygen levels are severely limited due to

2961-548: The lake's salts. This creates a dynamic environment where seasonal shifts affect the salt lake's mineral layers, contributing to its evolving structure and composition. Groundwater rich in dissolved ions often serve as primary mineral sources that, combined with processes like evaporation and deposition, contribute to salt lake development. Salt lakes host a diverse range of animals, despite high levels of salinity acting as significant environmental constraints. Increased salinity worsens oxygen levels and thermal conditions, raising

3024-628: The lakes, and crosses the salt pan of Tobin Lake near the eastern end. The lakes were named during the aerial expedition of Donald George Mackay in 1933, after the designer of the Percival Gull aircraft being used. This article about a location in Western Australia is a stub . You can help Misplaced Pages by expanding it . Salt lake Salt lakes are classified according to salinity levels. The formation of these lakes

3087-529: The liquid. In this method, the sensor is submerged in the fluid and is made to resonate at a specific frequency. As the surface of the sensor shears through the liquid, energy is lost due to its viscosity. This dissipated energy is then measured and converted into a viscosity reading. A higher viscosity causes a greater loss of energy. Extensional viscosity can be measured with various rheometers that apply extensional stress . Volume viscosity can be measured with an acoustic rheometer . Apparent viscosity

3150-437: The mitigation of dust transmission hotspots. Note: Some of the following are also partly fresh and/or brackish water. Viscosity Viscosity is a measure of a fluid's rate-dependent resistance to a change in shape or to movement of its neighboring portions relative to one another. For liquids, it corresponds to the informal concept of thickness ; for example, syrup has a higher viscosity than water . Viscosity

3213-435: The most relevant processes in continuum mechanics is not a coincidence: these are among the few physical quantities that are conserved at the microscopic level in interparticle collisions. Thus, rather than being dictated by the fast and complex microscopic interaction timescale, their dynamics occurs on macroscopic timescales, as described by the various equations of transport theory and hydrodynamics. Newton's law of viscosity

SECTION 50

#1732765666006

3276-567: The presence of freshwater species along with some salt-tolerant aquatic organisms. Lake Alchichica in Mexico is a hyposaline lake. Mesosaline lakes have a salinity level ranging from 3 to 35 g/L. An example of a mesosaline lake is Redberry Lake in Saskatchewan, Canada . Hypersaline lakes possess salinities greater than 35 g/L, often reaching levels that can exceed 200 g/L. The extreme salinity levels create harsh conditions that limit

3339-515: The relative velocity of different fluid particles. As such, the viscous stresses must depend on spatial gradients of the flow velocity. If the velocity gradients are small, then to a first approximation the viscous stresses depend only on the first derivatives of the velocity. (For Newtonian fluids, this is also a linear dependence.) In Cartesian coordinates, the general relationship can then be written as where μ i j k ℓ {\displaystyle \mu _{ijk\ell }}

3402-417: The restrictive environment limits biodiversity , allowing only specially adapted life forms to survive, which creates unique, highly specialized ecosystems that are distinct from freshwater or less saline habitats. Salt lakes declined worldwide in recent years. The Aral Sea , once of the largest saline lakes with a surface area of 67,499 km in 1960, diminished to approximately 6,990 km in 2016. This trend

3465-462: The surface. These seasonal changes influence the lake's structure, making stratification more pronounced during warmer months due to increasing evaporation, which drives separation between saline and fresher layers in the lake, leading a phenomenon known as meromixis (meromictic state), primarily prevents oxygen from penetrating the deeper layers and create the hypoxic (low oxygen) or anoxic (no oxygen) zones. This separation eventually influenced

3528-555: The term fugitive elasticity for fluid viscosity. However, many liquids (including water) will briefly react like elastic solids when subjected to sudden stress. Conversely, many "solids" (even granite ) will flow like liquids, albeit very slowly, even under arbitrarily small stress. Such materials are best described as viscoelastic —that is, possessing both elasticity (reaction to deformation) and viscosity (reaction to rate of deformation). Viscoelastic solids may exhibit both shear viscosity and bulk viscosity. The extensional viscosity

3591-715: The term containing κ {\displaystyle \kappa } drops out. Moreover, κ {\displaystyle \kappa } is often assumed to be negligible for gases since it is 0 {\displaystyle 0} in a monatomic ideal gas . One situation in which κ {\displaystyle \kappa } can be important is the calculation of energy loss in sound and shock waves , described by Stokes' law of sound attenuation , since these phenomena involve rapid expansions and compressions. The defining equations for viscosity are not fundamental laws of nature, so their usefulness, as well as methods for measuring or calculating

3654-583: The top plate moving at constant speed. In many fluids, the flow velocity is observed to vary linearly from zero at the bottom to u {\displaystyle u} at the top. Moreover, the magnitude of the force, F {\displaystyle F} , acting on the top plate is found to be proportional to the speed u {\displaystyle u} and the area A {\displaystyle A} of each plate, and inversely proportional to their separation y {\displaystyle y} : The proportionality factor

3717-513: The two systems differ only in how force and mass are defined. In the BG system the pound is a basic unit from which the unit of mass (the slug ) is defined by Newton's Second Law , whereas in the EE system the units of force and mass (the pound-force and pound-mass respectively) are defined independently through the Second Law using the proportionality constant g c . Kinematic viscosity has units of square feet per second (ft /s) in both

3780-403: The viscosity depends only space- and time-dependent macroscopic fields (such as temperature and density) defining local equilibrium. Nevertheless, viscosity may still carry a non-negligible dependence on several system properties, such as temperature, pressure, and the amplitude and frequency of any external forcing. Therefore, precision measurements of viscosity are only defined with respect to

3843-571: The viscosity rank-2 tensor is isotropic reduces these 81 coefficients to three independent parameters α {\displaystyle \alpha } , β {\displaystyle \beta } , γ {\displaystyle \gamma } : and furthermore, it is assumed that no viscous forces may arise when the fluid is undergoing simple rigid-body rotation, thus β = γ {\displaystyle \beta =\gamma } , leaving only two independent parameters. The most usual decomposition

SECTION 60

#1732765666006

3906-500: The viscosity, must be established using separate means. A potential issue is that viscosity depends, in principle, on the full microscopic state of the fluid, which encompasses the positions and momenta of every particle in the system. Such highly detailed information is typically not available in realistic systems. However, under certain conditions most of this information can be shown to be negligible. In particular, for Newtonian fluids near equilibrium and far from boundaries (bulk state),

3969-433: The water's density and viscosity , which demands greater energy for animal movement. Despite these challenges, salt lakes support biota adapted to such conditions with specialized physiological and biochemical mechanisms. Common salt lake invertebrates include various parasites, with around 85 parasite species found in saline waters, including crustaceans and monogeneans . Among them, the filter-feeding brine shrimp plays

#5994