24-669: Tongling Yangtze River Bridge is a cable-stayed bridge near Tongling , Anhui , China . The bridge spans 432 metres (1,417 ft) over the Yangtze River . The bridge carries four lanes of the G3 Beijing–Taipei Expressway . This article about a specific bridge or group of bridges in China is a stub . You can help Misplaced Pages by expanding it . Cable-stayed bridge A cable-stayed bridge has one or more towers (or pylons ), from which cables support
48-460: A 2-span or 3-span cable-stayed bridge, the loads from the main spans are normally anchored back near the end abutments by stays in the end spans. For more spans, this is not the case and the bridge structure is less stiff overall. This can create difficulties in both the design of the deck and the pylons. Examples of multiple-span structures in which this is the case include Ting Kau Bridge , where additional 'cross-bracing' stays are used to stabilise
72-686: A degree in civil engineering in 1950 from the University of Naples . Beginning in 1955 he introduced in Italy steel-concrete composite structures, mainly in the field of bridges . He planned the first motorway viaducts with steel structure (Coretta, Macinaie, Poggio Palina) on the Autostrada del Sole in Italy (1959). In 1959, he became managing director of the largest Italian steelwork company, "Costruzioni Metalliche Finsider S.p.A." in Milan, which
96-679: Is a cable-stayed bridge with a more substantial bridge deck that, being stiffer and stronger, allows the cables to be omitted close to the tower and for the towers to be lower in proportion to the span. The first extradosed bridges were the Ganter Bridge and Sunniberg Bridge in Switzerland. The first extradosed bridge in the United States, the Pearl Harbor Memorial Bridge was built to carry I-95 across
120-507: Is optimal for spans longer than cantilever bridges and shorter than suspension bridges. This is the range within which cantilever bridges would rapidly grow heavier, and suspension bridge cabling would be more costly. Cable-stayed bridges were being designed and constructed by the late 16th century, and the form found wide use in the late 19th century. Early examples, including the Brooklyn Bridge , often combined features from both
144-608: The Penobscot Narrows Bridge , completed in 2006, and the Veterans' Glass City Skyway , completed in 2007. A self-anchored suspension bridge has some similarity in principle to the cable-stayed type in that tension forces that prevent the deck from dropping are converted into compression forces vertically in the tower and horizontally along the deck structure. It is also related to the suspension bridge in having arcuate main cables with suspender cables, although
168-486: The Theodor Heuss Bridge (1958). However, this involves substantial erection costs, and more modern structures tend to use many more cables to ensure greater economy. Cable-stayed bridges may appear to be similar to suspension bridges , but they are quite different in principle and construction. In suspension bridges, large main cables (normally two) hang between the towers and are anchored at each end to
192-451: The live load of traffic crossing the bridge. The tension on the main cables is transferred to the ground at the anchorages and by downwards compression on the towers. In cable-stayed bridges, the towers are the primary load-bearing structures that transmit the bridge loads to the ground. A cantilever approach is often used to support the bridge deck near the towers, but lengths further from them are supported by cables running directly to
216-507: The Donzère-Mondragon canal at Pierrelatte is one of the first of the modern type, but had little influence on later development. The steel-decked Strömsund Bridge designed by Franz Dischinger (1955) is, therefore, more often cited as the first modern cable-stayed bridge. Other key pioneers included Fabrizio de Miranda , Riccardo Morandi , and Fritz Leonhardt . Early bridges from this period used very few stay cables, as in
240-636: The Quinnipiac River in New Haven, Connecticut, opening in June 2012. A cradle system carries the strands within the stays from the bridge deck to bridge deck, as a continuous element, eliminating anchorages in the pylons. Each epoxy-coated steel strand is carried inside the cradle in a one-inch (2.54 cm) steel tube. Each strand acts independently, allowing for removal, inspection, and replacement of individual strands. The first two such bridges are
264-409: The bridge deck. A distinctive feature are the cables or stays , which run directly from the tower to the deck, normally forming a fan-like pattern or a series of parallel lines. This is in contrast to the modern suspension bridge , where the cables supporting the deck are suspended vertically from the main cable, anchored at both ends of the bridge and running between the towers. The cable-stayed bridge
SECTION 10
#1732772386917288-405: The cable-stayed and suspension designs. Cable-stayed designs fell from favor in the early 20th century as larger gaps were bridged using pure suspension designs, and shorter ones using various systems built of reinforced concrete . It returned to prominence in the later 20th century when the combination of new materials, larger construction machinery, and the need to replace older bridges all lowered
312-562: The cable-stayed bridge are balanced so that the supporting towers do not tend to tilt or slide and so must only resist horizontal forces from the live loads. The following are key advantages of the cable-stayed form: There are four major classes of rigging on cable-stayed bridges: mono , harp , fan, and star . There are also seven main arrangements for support columns: single , double , portal , A-shaped , H-shaped , inverted Y and M-shaped . The last three are hybrid arrangements that combine two arrangements into one. Depending on
336-693: The combination of technologies created a stiffer bridge. John A. Roebling took particular advantage of this to limit deformations due to railway loads in the Niagara Falls Suspension Bridge . The earliest known surviving example of a true cable-stayed bridge in the United States is E.E. Runyon's largely intact steel or iron Bluff Dale Suspension bridge with wooden stringers and decking in Bluff Dale, Texas (1890), or his weeks earlier but ruined Barton Creek Bridge between Huckabay, Texas and Gordon, Texas (1889 or 1890). In
360-572: The design, the columns may be vertical or angled or curved relative to the bridge deck. A side-spar cable-stayed bridge uses a central tower supported only on one side. This design allows the construction of a curved bridge. Far more radical in its structure, the Puente del Alamillo (1992) uses a single cantilever spar on one side of the span, with cables on one side only to support the bridge deck. Unlike other cable-stayed types, this bridge exerts considerable overturning force upon its foundation and
384-436: The ground. This can be difficult to implement when ground conditions are poor. The main cables, which are free to move on bearings in the towers, bear the load of the bridge deck. Before the deck is installed, the cables are under tension from their own weight. Along the main cables smaller cables or rods connect to the bridge deck, which is lifted in sections. As this is done, the tension in the cables increases, as it does with
408-547: The pylons; Millau Viaduct and Mezcala Bridge , where twin-legged towers are used; and General Rafael Urdaneta Bridge , where very stiff multi-legged frame towers were adopted. A similar situation with a suspension bridge is found at both the Great Seto Bridge and San Francisco–Oakland Bay Bridge where additional anchorage piers are required after every set of three suspension spans – this solution can also be adapted for cable-stayed bridges. An extradosed bridge
432-517: The relative price of these designs. Cable-stayed bridges date back to 1595, where designs were found in Machinae Novae , a book by Croatian - Venetian inventor Fausto Veranzio . Many early suspension bridges were cable-stayed construction, including the 1817 footbridge Dryburgh Abbey Bridge , James Dredge 's patented Victoria Bridge, Bath (1836), and the later Albert Bridge (1872) and Brooklyn Bridge (1883). Their designers found that
456-466: The self-anchored type lacks the heavy cable anchorages of the ordinary suspension bridge. Unlike either a cable-stayed bridge or a suspension bridge, the self-anchored suspension bridge must be supported by falsework during construction and so it is more expensive to construct. Fabrizio de Miranda Fabrizio de Miranda (30 October 1926 – 21 January 2015) was an Italian bridges and structural engineer and university professor. He graduated with
480-512: The spar must resist the bending caused by the cables, as the cable forces are not balanced by opposing cables. The spar of this particular bridge forms the gnomon of a large garden sundial . Related bridges by the architect Santiago Calatrava include the Puente de la Mujer (2001), Sundial Bridge (2004), Chords Bridge (2008), and Assut de l'Or Bridge (2008). Cable-stayed bridges with more than three spans involve significantly more challenging designs than do 2-span or 3-span structures. In
504-411: The towers. That has the disadvantage, unlike for the suspension bridge, that the cables pull to the sides as opposed to directly up, which requires the bridge deck to be stronger to resist the resulting horizontal compression loads, but it has the advantage of not requiring firm anchorages to resist the horizontal pull of the main cables of the suspension bridge. By design, all static horizontal forces of
SECTION 20
#1732772386917528-529: The twentieth century, early examples of cable-stayed bridges included A. Gisclard's unusual Cassagnes bridge (1899), in which the horizontal part of the cable forces is balanced by a separate horizontal tie cable, preventing significant compression in the deck, and G. Leinekugel le Coq's bridge at Lézardrieux in Brittany (1924). Eduardo Torroja designed a cable-stayed aqueduct at Tempul in 1926. Albert Caquot 's 1952 concrete-decked cable-stayed bridge over
552-857: Was among the Founders and then President (in 1970–1973) of the Italian College of the Steel Structures Technicians (CTA). In 1968, he founded a Consulting Engineering Firm specializing in the design of Bridges and Structures . During more than fifty years of professional activity, he designed hundreds of structures and bridges. Notable projects include the elevated highways in Genoa (1963–1965), in Fiorenza- Milan (1961) and in San Lorenzo- Rome (1969–1976),
576-610: Was under his management until 1967. From 1965 until 1996, he was professor of "Tecnica delle costruzioni" (structural engineering) at Politecnico di Milano . He successfully participated in numerous National and International Design Competitions of bridges including the first prize ex aequo to the International Competition for the Messina Bridge as member of the Lambertini Group (1969). He
#916083