131-409: The New Haven–Springfield Line is a railroad line owned by Amtrak from New Haven, Connecticut , north to Springfield, Massachusetts , serving the Knowledge Corridor . As a branch of the Northeast Corridor just north of New Haven State Street station , it is served by approximately seven daily Northeast Regional round trips, some continuing from New Haven to Washington, D.C. , along
262-408: A crank on a driving axle. Steam locomotives have been phased out in most parts of the world for economical and safety reasons, although many are preserved in working order by heritage railways . Electric locomotives draw power from a stationary source via an overhead wire or third rail . Some also or instead use a battery . In locomotives that are powered by high-voltage alternating current ,
393-586: A dining car . Some lines also provide over-night services with sleeping cars . Some long-haul trains have been given a specific name . Regional trains are medium distance trains that connect cities with outlying, surrounding areas, or provide a regional service, making more stops and having lower speeds. Commuter trains serve suburbs of urban areas, providing a daily commuting service. Airport rail links provide quick access from city centres to airports . High-speed rail are special inter-city trains that operate at much higher speeds than conventional railways,
524-731: A fourth rail system in 1890 on the City and South London Railway , now part of the London Underground Northern line . This was the first major railway to use electric traction . The world's first deep-level electric railway, it runs from the City of London , under the River Thames , to Stockwell in south London. The first practical AC electric locomotive was designed by Charles Brown , then working for Oerlikon , Zürich. In 1891, Brown had demonstrated long-distance power transmission, using three-phase AC , between
655-542: A funicular railway at the Hohensalzburg Fortress in Austria. The line originally used wooden rails and a hemp haulage rope and was operated by human or animal power, through a treadwheel . The line is still operational, although in updated form and is possibly the oldest operational railway. Wagonways (or tramways ) using wooden rails, hauled by horses, started appearing in the 1550s to facilitate
786-492: A hydro-electric plant at Lauffen am Neckar and Frankfurt am Main West, a distance of 280 km (170 mi). Using experience he had gained while working for Jean Heilmann on steam–electric locomotive designs, Brown observed that three-phase motors had a higher power-to-weight ratio than DC motors and, because of the absence of a commutator , were simpler to manufacture and maintain. However, they were much larger than
917-422: A joint venture between TransitAmerica Services and Alternate Concepts Inc . Half of these trains operate between New Haven and Hartford, with the other four running the whole line between New Haven and Springfield. Amtrak added three new Shuttle round trips on top of its previous service. This brings the total round trips on the line to sixteen between New Haven and Hartford, with twelve of them operating along
1048-505: A portmanteau based on the company's legal name. It continues to do business as an asset management and network services provider in three Shared Assets Areas that were excluded from the division of its operations during its acquisition by CSX Corporation and the Norfolk Southern Railway . The federal government created Conrail to take over the potentially profitable lines of multiple bankrupt carriers, including
1179-431: A steam engine that provides adhesion. Coal , petroleum , or wood is burned in a firebox , boiling water in the boiler to create pressurized steam. The steam travels through the smokebox before leaving via the chimney or smoke stack. In the process, it powers a piston that transmits power directly through a connecting rod (US: main rod) and a crankpin (US: wristpin) on the driving wheel (US main driver) or to
1310-469: A transformer in the locomotive converts the high-voltage low-current power to low-voltage high current used in the traction motors that power the wheels. Modern locomotives may use three-phase AC induction motors or direct current motors. Under certain conditions, electric locomotives are the most powerful traction. They are also the cheapest to run and provide less noise and no local air pollution. However, they require high capital investments both for
1441-650: A 51 percent share in the Indiana Harbor Belt Railroad . In the years leading to 1973, the freight railroad system of the Northeastern United States was collapsing. Although government-funded Amtrak took over intercity passenger services on May 1, 1971, railroad companies continued to lose money due to extensive government regulations, expensive labor costs, competition from other transportation modes, declining industrial business and other factors. The largest railroad in
SECTION 10
#17327837295021572-558: A bill to nationalize the bankrupt railroads. The Association of American Railroads , which opposed nationalization, submitted an alternate proposal for a government-funded private company. Judge Fullam forced the Penn Central to operate into 1974, when, on January 2, after threatening a veto , President Richard Nixon signed the Regional Rail Reorganization Act of 1973 into law. The "3R Act," as it
1703-550: A diesel locomotive from the company in 1909. The world's first diesel-powered locomotive was operated in the summer of 1912 on the Winterthur–Romanshorn railway in Switzerland, but was not a commercial success. The locomotive weight was 95 tonnes and the power was 883 kW with a maximum speed of 100 km/h (62 mph). Small numbers of prototype diesel locomotives were produced in a number of countries through
1834-478: A double track plateway, erroneously sometimes cited as world's first public railway, in south London. William Jessop had earlier used a form of all-iron edge rail and flanged wheels successfully for an extension to the Charnwood Forest Canal at Nanpantan , Loughborough, Leicestershire in 1789. In 1790, Jessop and his partner Outram began to manufacture edge rails. Jessop became a partner in
1965-612: A final report in 2005, which was presented for a grant application to the Federal Transit Administration New Starts program. Construction added 27 miles (43 km) of double track as well as 2 miles (3.2 km) of new passing sidings , leaving less than 12 miles (19 km) of single track. Five new interlockings were built and new signal systems were installed, including the installation of Positive Train Control . Bridges and culverts on
2096-493: A former Pittsburgh, Cincinnati, Chicago and St. Louis Railroad (PRR Panhandle Route line), while Norfolk Southern got the former Pennsylvania Railroad main line and Cleveland and Pittsburgh Railroad from Jersey City, New Jersey , to Cleveland, and the rest of the former NYC main line west to Chicago, Illinois . Thus the Conrail "X" was neatly split in two, CSX getting one diagonal from Boston to St. Louis and Norfolk Southern
2227-437: A large turning radius in its design. While high-speed rail is most often designed for passenger travel, some high-speed systems also offer freight service. Since 1980, rail transport has changed dramatically, but a number of heritage railways continue to operate as part of living history to preserve and maintain old railway lines for services of tourist trains. A train is a connected series of rail vehicles that move along
2358-498: A larger locomotive named Galvani , exhibited at the Royal Scottish Society of Arts Exhibition in 1841. The seven-ton vehicle had two direct-drive reluctance motors , with fixed electromagnets acting on iron bars attached to a wooden cylinder on each axle, and simple commutators . It hauled a load of six tons at four miles per hour (6 kilometers per hour) for a distance of one and a half miles (2.4 kilometres). It
2489-423: A locomotive. This involves one or more powered vehicles being located at the front of the train, providing sufficient tractive force to haul the weight of the full train. This arrangement remains dominant for freight trains and is often used for passenger trains. A push–pull train has the end passenger car equipped with a driver's cab so that the engine driver can remotely control the locomotive. This allows one of
2620-477: A number of trains per hour (tph). Passenger trains can usually be into two types of operation, intercity railway and intracity transit. Whereas intercity railway involve higher speeds, longer routes, and lower frequency (usually scheduled), intracity transit involves lower speeds, shorter routes, and higher frequency (especially during peak hours). Intercity trains are long-haul trains that operate with few stops between cities. Trains typically have amenities such as
2751-676: A piece of circular rail track in Bloomsbury , London, the Catch Me Who Can , but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. The first commercially successful steam locomotive was Matthew Murray 's rack locomotive Salamanca built for the Middleton Railway in Leeds in 1812. This twin-cylinder locomotive
SECTION 20
#17327837295022882-465: A pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. He built the locomotive Blücher , also a successful flanged -wheel adhesion locomotive. In 1825 he built the locomotive Locomotion for the Stockton and Darlington Railway in the northeast of England, which became the first public steam railway in
3013-439: A revival in recent decades due to road congestion and rising fuel prices, as well as governments investing in rail as a means of reducing CO 2 emissions . Smooth, durable road surfaces have been made for wheeled vehicles since prehistoric times. In some cases, they were narrow and in pairs to support only the wheels. That is, they were wagonways or tracks. Some had grooves or flanges or other mechanical means to keep
3144-739: A single lever to control both engine and generator in a coordinated fashion, and was the prototype for all diesel–electric locomotive control systems. In 1914, world's first functional diesel–electric railcars were produced for the Königlich-Sächsische Staatseisenbahnen ( Royal Saxon State Railways ) by Waggonfabrik Rastatt with electric equipment from Brown, Boveri & Cie and diesel engines from Swiss Sulzer AG . They were classified as DET 1 and DET 2 ( de.wiki ). The first regular used diesel–electric locomotives were switcher (shunter) locomotives . General Electric produced several small switching locomotives in
3275-407: A standard. Following SNCF's successful trials, 50 Hz, now also called industrial frequency was adopted as standard for main-lines across the world. Earliest recorded examples of an internal combustion engine for railway use included a prototype designed by William Dent Priestman . Sir William Thomson examined it in 1888 and described it as a "Priestman oil engine mounted upon a truck which
3406-406: A standardized rulebook called Northeast Operating Rules Advisory Committee (NORAC). This significantly increased operational flexibly, allowing crews to operate on any territory they were qualified on, instead of additionally needing multiple operating rules qualifications. Additionally, standardized signal rules allowed Conrail to standardize signaling hardware and operation across its system. In
3537-415: A tenant. Western Hills Express (5703) With Conrail's increasing success, it decided to merge the company with another railroad, so it approached CSX Transportation about buying Conrail. CSX's bid for Conrail, however, drew the attention of Norfolk Southern Railway which, fearing that CSX would come to dominate rail traffic in the eastern US, made a bid of its own leading to a takeover battle between
3668-507: A terminal operating company owned by both CSX and NS. The Conrail Shared Assets Operations arrangement was a concession made to federal regulators who were concerned about the lack of competition in certain rail markets and logistical problems associated with the breaking-up of Conrail operations as they existed in densely-populated areas with many local customers. The smaller Conrail operation that exists today serves rail freight customers in these markets on behalf of its two owners. A fourth area,
3799-632: A terminus about one-half mile (800 m) away. A funicular railway was also made at Broseley in Shropshire some time before 1604. This carried coal for James Clifford from his mines down to the River Severn to be loaded onto barges and carried to riverside towns. The Wollaton Wagonway , completed in 1604 by Huntingdon Beaumont , has sometimes erroneously been cited as the earliest British railway. It ran from Strelley to Wollaton near Nottingham . The Middleton Railway in Leeds , which
3930-448: A third or fourth track would require removing or relocating the busway. The connection between a new double track section from Hartford to Windsor and an existing section from north of Windsor to south of Windsor Locks was completed on September 25, 2018, leaving less than twelve miles (19 km) of single track on the line. The new section was not expected to allow additional service, but to increase reliability. One proposal to replace
4061-408: A wheel. This was a large stationary engine , powering cotton mills and a variety of machinery; the state of boiler technology necessitated the use of low-pressure steam acting upon a vacuum in the cylinder, which required a separate condenser and an air pump . Nevertheless, as the construction of boilers improved, Watt investigated the use of high-pressure steam acting directly upon a piston, raising
New Haven–Springfield Line - Misplaced Pages Continue
4192-626: Is a 501(c)(3) non-profit organization based in Shippensburg, Pennsylvania . The society aims to preserve and restore equipment, items pertaining to, and photographs of Conrail specifically and of American railroading in general. As of 2022, the group publishes a quarterly magazine and a calendar, as well as other occasional mailings. Previous conventions have been held in Altoona, Pennsylvania , Philadelphia , Cleveland , and Warren, Ohio . More recent preservation activities include completion of
4323-410: Is a single, self-powered car, and may be electrically propelled or powered by a diesel engine . Multiple units have a driver's cab at each end of the unit, and were developed following the ability to build electric motors and other engines small enough to fit under the coach. There are only a few freight multiple units, most of which are high-speed post trains. Steam locomotives are locomotives with
4454-399: Is dominant. Electro-diesel locomotives are built to run as diesel–electric on unelectrified sections and as electric locomotives on electrified sections. Alternative methods of motive power include magnetic levitation , horse-drawn, cable , gravity, pneumatics and gas turbine . A passenger train stops at stations where passengers may embark and disembark. The oversight of the train is
4585-578: Is ownership of the three Shared Assets Areas in New Jersey , Philadelphia , and Detroit . Both CSX and NS have the right to serve all shippers in these areas, paying Conrail for the cost of maintaining and improving trackage . They also make use of Conrail to perform switching and terminal services within the areas, but not as a common carrier , since contracts are signed between shippers and CSX or NS. Conrail also retains various support facilities including maintenance-of-way and training, as well as
4716-673: Is used for about 8% of passenger and freight transport globally, thanks to its energy efficiency and potentially high speed . Rolling stock on rails generally encounters lower frictional resistance than rubber-tyred road vehicles, allowing rail cars to be coupled into longer trains . Power is usually provided by diesel or electrical locomotives . While railway transport is capital-intensive and less flexible than road transport, it can carry heavy loads of passengers and cargo with greater energy efficiency and safety. Precursors of railways driven by human or animal power have existed since antiquity, but modern rail transport began with
4847-556: Is worked on a temporary line of rails to show the adaptation of a petroleum engine for locomotive purposes." In 1894, a 20 hp (15 kW) two axle machine built by Priestman Brothers was used on the Hull Docks . In 1906, Rudolf Diesel , Adolf Klose and the steam and diesel engine manufacturer Gebrüder Sulzer founded Diesel-Sulzer-Klose GmbH to manufacture diesel-powered locomotives. Sulzer had been manufacturing diesel engines since 1898. The Prussian State Railways ordered
4978-755: The Chessie System , which would help spur competition in Conrail's territory. Chessie, however, could not reach an agreement with EL labor unions , and in February 1976 announced that it would not be buying the EL section. The USRA hurriedly assigned large amounts of trackage rights to the Delaware and Hudson Railway , allowing it to compete in the Philadelphia, Pennsylvania , and Washington, D.C. , markets. The State of Michigan decided to keep operational
5109-770: The Inland Route , starting July 1, 1911, by agreement of the NYNH&;H and the New York Central and Hudson River Railroad (lessee of the Boston and Albany Railroad ). During the 1940s period of peak passenger volume, the NYNH&H ran several New York City - Boston trains through the Inland Route, that is, via New Haven, Hartford, Springfield and Worcester, in the #50s series of train numbers. The service included an overnight train with sleeping car service. By
5240-645: The Inland Route . With the November 14, 1971 timetable , this was assigned the name Bay State , and extended south from Philadelphia to Washington, DC . The train was discontinued March 1, 1975, though on October 31 of that year, the Boston section of the Lake Shore Limited began, restoring Springfield–Boston service. On April 1, 1976, Amtrak acquired the New Haven–Springfield Line from
5371-760: The Massachusetts Bay Transportation Authority service district (transferred to the Boston and Maine Railroad , under contract to the MBTA, in March 1977 ). Pursuant to the Northeast Rail Service Act of 1981, Conrail operated the remainder until 1983 when these services were transferred to state or metropolitan transit authorities. The transit authorities purchased the track and right-of-way on which their commuter operations ran, leaving Conrail freight operations as
New Haven–Springfield Line - Misplaced Pages Continue
5502-490: The Northeast Corridor , further improving its finances. In 1984, the government put its 85% share up for sale. Bids were received from Alleghany Corporation , Citibank , an employee buyout , Guilford Transportation Industries , Norfolk Southern Railway and a consortium headed by J. Willard Marriott . On February 8, 1985, Secretary of Transportation Elizabeth Dole announced Norfolk Southern Railway as
5633-777: The Penn Central Transportation Company and Erie Lackawanna Railway . After railroad regulations were lifted by the 4R Act and the Staggers Act , Conrail began to turn a profit in the 1980s and was privatized in 1987. The two remaining Class I railroads in the East , CSX Transportation and the Norfolk Southern Railway (NS), agreed in 1997 to acquire the system and split it into two roughly-equal parts (alongside three residual shared-assets areas), returning rail freight competition to
5764-671: The Raritan River Railroad (1980) were also included (See list of railroads transferred to Conrail for a full list). It was approved by Congress on November 9, and on February 5, 1976, President Gerald Ford signed the Railroad Revitalization and Regulatory Reform Act of 1976, which included this Final System Plan, into law. The EL had been formed in 1960 as a merger of the Erie Railroad and Delaware, Lackawanna and Western Railroad . It too
5895-678: The United Kingdom , South Korea , Scandinavia, Belgium and the Netherlands. The construction of many of these lines has resulted in the dramatic decline of short-haul flights and automotive traffic between connected cities, such as the London–Paris–Brussels corridor, Madrid–Barcelona, Milan–Rome–Naples, as well as many other major lines. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates
6026-414: The overhead lines and the supporting infrastructure, as well as the generating station that is needed to produce electricity. Accordingly, electric traction is used on urban systems, lines with high traffic and for high-speed rail. Diesel locomotives use a diesel engine as the prime mover . The energy transmission may be either diesel–electric , diesel-mechanical or diesel–hydraulic but diesel–electric
6157-458: The puddling process in 1784. In 1783 Cort also patented the rolling process , which was 15 times faster at consolidating and shaping iron than hammering. These processes greatly lowered the cost of producing iron and rails. The next important development in iron production was hot blast developed by James Beaumont Neilson (patented 1828), which considerably reduced the amount of coke (fuel) or charcoal needed to produce pig iron. Wrought iron
6288-418: The rotary phase converter , enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high-voltage national networks. An important contribution to the wider adoption of AC traction came from SNCF of France after World War II. The company conducted trials at AC 50 Hz, and established it as
6419-671: The " Shore Line " along the Connecticut Shore and through Rhode Island . The line was originally built by the Hartford and New Haven Railroad , and opened to Springfield in 1844. In 2004, Congress added the New Haven–Springfield Line onto the Northern New England Corridor , one of ten federally designated corridors for potential high-speed rail service. Upgrades needed for higher-speed rail , including rebuilding portions of double tracking removed in
6550-481: The 147. Train 142 was dropped October 27, 2003, and the November 1, 2004, timetable dropped 140 and 147, ending the use of the Inland Route . On May 22, 2012, construction started on the CT Fastrak busway between New Britain and Hartford in the northern two track slots between Hartford and Newington Junction . The southern two track slots are used for the active double-track rail line. Any future re-addition of
6681-540: The 1880s, railway electrification began with tramways and rapid transit systems. Starting in the 1940s, steam locomotives were replaced by diesel locomotives . The first high-speed railway system was introduced in Japan in 1964, and high-speed rail lines now connect many cities in Europe , East Asia , and the eastern United States . Following some decline due to competition from cars and airplanes, rail transport has had
SECTION 50
#17327837295026812-521: The 1930s (the famous " 44-tonner " switcher was introduced in 1940) Westinghouse Electric and Baldwin collaborated to build switching locomotives starting in 1929. In 1929, the Canadian National Railways became the first North American railway to use diesels in mainline service with two units, 9000 and 9001, from Westinghouse. Although steam and diesel services reaching speeds up to 200 km/h (120 mph) were started before
6943-508: The 1960s in Europe, they were not very successful. The first electrified high-speed rail Tōkaidō Shinkansen was introduced in 1964 between Tokyo and Osaka in Japan. Since then high-speed rail transport, functioning at speeds up to and above 300 km/h (190 mph), has been built in Japan, Spain, France , Germany, Italy, the People's Republic of China, Taiwan (Republic of China),
7074-509: The 1980s, were performed in preparation for the CT Rail Hartford Line commuter service, which launched on June 16, 2018. The New Haven–Springfield Line was built by the Hartford and New Haven Railroad (H&NH) and began operations in 1844, forming the first all-rail route between Boston and New Haven, with steamship service on Long Island Sound completing service to New York. The Shore Line, today's Northeast Corridor ,
7205-489: The 2010s, as railroads upgraded their signals for Positive Train Control compliance. Today, most Northeastern railroads associated with former Conrail lines have maintained standardization of all systems as vertical color light signals using NORAC rules. Conrail Shared Assets Operations continues to use the tri-light as its standard signal type. Amtrak uses a colorized version of PRR position light signals called "Position Color Lights". The Conrail Historical Society, Inc.,
7336-464: The 40 km Burgdorf–Thun line , Switzerland. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than a short section. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The electrical system was three-phase at 3 kV 15 Hz. In 1918, Kandó invented and developed
7467-530: The Butterley Company in 1790. The first public edgeway (thus also first public railway) built was Lake Lock Rail Road in 1796. Although the primary purpose of the line was to carry coal, it also carried passengers. These two systems of constructing iron railways, the "L" plate-rail and the smooth edge-rail, continued to exist side by side until well into the early 19th century. The flanged wheel and edge-rail eventually proved its superiority and became
7598-482: The Conrail breakup was agreed upon, and neither NS or CSX wanted 'their' locomotives to be equipped with markers. Similarly, the standard-cab SD70, Conrail's final order of locomotives, were ordered to NS specifications, and were in Norfolk Southern's preferred numbering series (the 2500's), which they retained after the breakup. When Conrail was formed, it acquired many different railways, and as typical in
7729-641: The Corridor and others terminating at New Haven as shuttles . On weekends, there is one train daily to Roanoke, Virginia . It is also served by the daily Vermonter , which starts in Washington, D.C., and continues north from Springfield, finally terminating in St. Albans, Vermont . The line is part of the Inland Route connecting Boston and New York via Hartford, Springfield, and Worcester , in contrast to
7860-514: The DC motors of the time and could not be mounted in underfloor bogies : they could only be carried within locomotive bodies. In 1894, Hungarian engineer Kálmán Kandó developed a new type 3-phase asynchronous electric drive motors and generators for electric locomotives. Kandó's early 1894 designs were first applied in a short three-phase AC tramway in Évian-les-Bains (France), which was constructed between 1896 and 1898. In 1896, Oerlikon installed
7991-769: The Massachusetts Executive Office of Transportation studied adding a dedicated New Haven–Hartford–Springfield Commuter Rail Line between New Haven and Springfield to create a more accessible commuter connection to the Metro North commuter lines between New York City and Southwestern Connecticut, and also give more transit options to people commuting within the Knowledge Corridor region surrounding Hartford and Springfield. As part of this, extending or adding stations and right of way and new rail options were investigated. The study culminated in
SECTION 60
#17327837295028122-644: The North American rail industry, signaling was not standardized between these railways. This caused problems for Conrail, which had to "qualify" train crews on as many as seven different signaling systems and operating rules. The varying systems included the PRR position light signals , the NYC searchlight signals and tri-light signals, and the EL tri-light and semaphore signals. Conrail, and other eastern railroads which required multiple operating rules, came up with
8253-655: The Northeast Rail Service Act of 1981 (NERSA), which amended portions of the 3R Act by exempting Conrail from liability for any state taxes and requiring the Secretary of Transportation to make arrangements for the sale of the government's interest in Conrail. After NERSA was implemented, Conrail, under the aggressive leadership of L. Stanley Crane began to improve and reported taxable income between $ 2 million and $ 314 million each year from 1983 through 1986. Conrail's government-funded rebuilding of
8384-852: The Northeast by essentially undoing the 1968 merger of the Pennsylvania Railroad and New York Central Railroad that created Penn Central . Following approval by the Surface Transportation Board , CSX and NS took control in August 1998, and on June 1, 1999, began operating their respective portions of Conrail. The old company remains a jointly-owned subsidiary, with CSX and NS owning respectively 42% and 58% of its stock , corresponding to how much of Conrail's assets they acquired. Each parent, however, has an equal voting interest . The primary asset retained by Conrail
8515-477: The November 10, 1996, timetable, with the extension of the daily Virginia Service train 85/86 to Boston via Springfield. That train was later truncated, and the former Washington – Boston Bay State was reinstated via the Inland Route . By the October 28, 2002, schedule, trains 140 (weekend) and 142 (weekday) provided northbound Inland Route service, while the only weekend service was provided southbound via
8646-616: The Staggers Act, railroads, including Conrail, were freed from the requirement to continue money-losing services. Conrail began turning a profit by 1981, the result of the Staggers Act freedoms and its own managerial improvements under the leadership of L. Stanley Crane, who had been chief executive officer of the Southern Railway . While the Staggers Act helped immensely in allowing all railroads to more-easily abandon unprofitable rail lines and set their own freight rates, it
8777-477: The aging Interstate 84 viaduct through Hartford as part of the I-84 Hartford Project is an at-grade roadbed, which would require relocating the rail tracks and busway north of the new road. The viaduct crosses the tracks and busway twice, a route dictated by the placement of abutting development back when the viaduct was constructed in the 1960s. Subsequent demolition has made the proposal to move
8908-632: The cosmetic restoration of N7E caboose 21165 and a partnership with the B&;O Railroad Museum to restore its ex-Conrail SW7 8905. The CRHS owns four pieces of on-track equipment: 86-foot boxcar 243880 (currently under development into a stand-alone Conrail museum), cabooses 21165 and 22130, and former Triple Crown RoadRailer TCSZ 463491. A preserved Conrail ex-PRR GP30 is on display at the Railroad Museum of Pennsylvania . To mark its 30th anniversary, Norfolk Southern painted 20 new locomotives with
9039-412: The dilapidated infrastructure and rolling stock it inherited from its six predecessors succeeded by the end of the 1970s in improving the physical condition of tracks, locomotives and freight cars . However, fundamental economic regulatory issues remained, and Conrail continued to post losses of as much as $ 1 million a day. Conrail management, recognizing the need for more regulatory freedoms to address
9170-430: The duty of a guard/train manager/conductor . Passenger trains are part of public transport and often make up the stem of the service, with buses feeding to stations. Passenger trains provide long-distance intercity travel, daily commuter trips, or local urban transit services, operating with a diversity of vehicles, operating speeds, right-of-way requirements, and service frequency. Service frequencies are often expressed as
9301-465: The early years of Conrail, the NYC "small-back" searchlight was adopted as the systemwide standard for new signal installations and replacements. The standard signal was quickly changed to the NYC tri-light. This move was done to decrease maintenance requirements, as searchlight signals need moving parts to switch between colors, unlike tri-lights, which have individual lamps. Many signals from previous railroads were re-used though, as new signaling hardware
9432-557: The economic issues, were among the parties lobbying for what became the Staggers Act of 1980, which significantly loosened the Interstate Commerce Commission 's rigid economic control of the rail industry. This allowed Conrail and other carriers the opportunity to become profitable and strengthen their finances. The Staggers Act allowed the setting of rates that would recover capital and operating cost (fully allocated cost recovery) by each and every route mile
9563-402: The end of the 19th century, because they were cleaner compared to steam-driven trams which caused smoke in city streets. In 1784 James Watt , a Scottish inventor and mechanical engineer, patented a design for a steam locomotive . Watt had improved the steam engine of Thomas Newcomen , hitherto used to pump water out of mines, and developed a reciprocating engine in 1769 capable of powering
9694-471: The end of the 19th century, improving the quality of steel and further reducing costs. Thus steel completely replaced the use of iron in rails, becoming standard for all railways. The first passenger horsecar or tram , Swansea and Mumbles Railway , was opened between Swansea and Mumbles in Wales in 1807. Horses remained the preferable mode for tram transport even after the arrival of steam engines until
9825-527: The engine by one power stroke. The transmission system employed a large flywheel to even out the action of the piston rod. On 21 February 1804, the world's first steam-powered railway journey took place when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren ironworks, near Merthyr Tydfil in South Wales . Trevithick later demonstrated a locomotive operating upon
9956-475: The era of great expansion of railways that began in the late 1860s. Steel rails lasted several times longer than iron. Steel rails made heavier locomotives possible, allowing for longer trains and improving the productivity of railroads. The Bessemer process introduced nitrogen into the steel, which caused the steel to become brittle with age. The open hearth furnace began to replace the Bessemer process near
10087-522: The first commercial example of the system on the Lugano Tramway . Each 30-tonne locomotive had two 110 kW (150 hp) motors run by three-phase 750 V 40 Hz fed from double overhead lines. Three-phase motors run at a constant speed and provide regenerative braking , and are well suited to steeply graded routes, and the first main-line three-phase locomotives were supplied by Brown (by then in partnership with Walter Boveri ) in 1899 on
10218-537: The former Monongahela Railway in southwest Pennsylvania , was originally owned jointly by the Baltimore and Ohio Railroad , Pennsylvania Railroad and Pittsburgh and Lake Erie Railroad . Conrail absorbed the company in 1993, and assigned trackage rights to CSX, the successor to the B&O and P&LE. With the Conrail breakup, those lines are owned by NS, but the CSX trackage rights are still in place. Since Conrail
10349-469: The full Ann Arbor Railroad , of which Conrail would run only the southernmost portion. Michigan bought it and the whole line was operated by Conrail for several years until it was sold to a short line . Conrail was incorporated in Pennsylvania on October 25, 1974, and operations began on April 1, 1976. The federal government owned 85%, with employees owning the remaining 15%. The theory was that if
10480-491: The full line to Springfield. On weekends and holidays, CT Rail operates four New Haven–Hartford round trips and three New Haven–Springfield round trips. Amtrak continues to offer its existing weekend service with some minor schedule changes. Together, 12–13 round trips are offered on weekends. The Springfield–New Haven corridor is served by some Northeast Regional trains in the 136 and 140 series. These trains provide direct service from Springfield to Washington, D.C. , without
10611-562: The highest possible radius. All these features are dramatically different from freight operations, thus justifying exclusive high-speed rail lines if it is economically feasible. Conrail Conrail ( reporting mark CR ), formally the Consolidated Rail Corporation , was the primary Class I railroad in the Northeastern United States between 1976 and 1999. The trade name Conrail is
10742-672: The invention of the steam locomotive in the United Kingdom at the beginning of the 19th century. The first passenger railway, the Stockton and Darlington Railway , opened in 1825. The quick spread of railways throughout Europe and North America, following the 1830 opening of the first intercity connection in England, was a key component of the Industrial Revolution . The adoption of rail transport lowered shipping costs compared to water transport, leading to "national markets" in which prices varied less from city to city. In
10873-400: The lights above the deck. Red marker lights (not class lights, which are multi-color) were also a preference of Conrail. Most locomotives that went to CSX retained their marker lights, while Norfolk Southern quickly removed them. All Conrail locomotives that went to CSX and NS have been either retired or repainted. The last unit to wear "Conrail Blue", NS 8312, was retired in 2014. Conrail was
11004-1230: The limit being regarded at 200 to 350 kilometres per hour (120 to 220 mph). High-speed trains are used mostly for long-haul service and most systems are in Western Europe and East Asia. Magnetic levitation trains such as the Shanghai maglev train use under-riding magnets which attract themselves upward towards the underside of a guideway and this line has achieved somewhat higher peak speeds in day-to-day operation than conventional high-speed railways, although only over short distances. Due to their heightened speeds, route alignments for high-speed rail tend to have broader curves than conventional railways, but may have steeper grades that are more easily climbed by trains with large kinetic energy. High kinetic energy translates to higher horsepower-to-ton ratios (e.g. 20 horsepower per short ton or 16 kilowatts per tonne); this allows trains to accelerate and maintain higher speeds and negotiate steep grades as momentum builds up and recovered in downgrades (reducing cut and fill and tunnelling requirements). Since lateral forces act on curves, curvatures are designed with
11135-509: The line have been repaired, rehabilitated or replaced. Stations at Wallingford , Meriden , and Berlin were completely rebuilt, while New Haven State Street and Hartford had improvements made. New Hartford Line commuter rail service on the line began on June 16, 2018. Expanded Amtrak Shuttle service on the line launched one week earlier on June 9, 2018. Connecticut DOT provides eight round trip commuter trains on weekdays under its CT Rail branding that are operated by its new contractor,
11266-429: The locomotive-hauled train's drawbacks to be removed, since the locomotive need not be moved to the front of the train each time the train changes direction. A railroad car is a vehicle used for the haulage of either passengers or freight. A multiple unit has powered wheels throughout the whole train. These are used for rapid transit and tram systems, as well as many both short- and long-haul passenger trains. A railcar
11397-517: The main portion of the B&O to the new line to New York through a series of tunnels around the edges of Baltimore's downtown. Electricity quickly became the power supply of choice for subways, abetted by the Sprague's invention of multiple-unit train control in 1897. By the early 1900s most street railways were electrified. The London Underground , the world's oldest underground railway, opened in 1863, and it began operating electric services using
11528-433: The mid-1920s. The Soviet Union operated three experimental units of different designs since late 1925, though only one of them (the E el-2 ) proved technically viable. A significant breakthrough occurred in 1914, when Hermann Lemp , a General Electric electrical engineer, developed and patented a reliable direct current electrical control system (subsequent improvements were also patented by Lemp). Lemp's design used
11659-545: The mid-1950s these trips needed transfers in Springfield. By the startup of Amtrak on May 1, 1971, the Inland Route was no longer in use, but frequent Penn Central trains continued to serve the New Haven–Springfield Line. Amtrak continued the Connecticut Yankee (by that time shortened to Philadelphia-Springfield) along the route. On May 17, 1971, Amtrak added a train between Philadelphia and Boston via
11790-622: The need to change trains in New Haven. For 150 mph (241 km/h) or more in the US, see High-speed rail in the United States Railroad Rail transport (also known as train transport ) is a means of transport using wheeled vehicles running in tracks , which usually consist of two parallel steel rails . Rail transport is one of the two primary means of land transport , next to road transport . It
11921-417: The new Consolidated Rail Corporation. Unlike most railroad consolidations, only the designated lines were to be taken over. Other lines would be sold to Amtrak, various state governments, transportation agencies, and solvent railroads. The few remaining lines were to remain with the old companies along with all previously-abandoned lines, many stations, and all non-rail related properties, thus converting most of
12052-538: The new companies, and NS also acquired the CR reporting mark. Operations under CSX and NS began on June 1, 1999, bringing Conrail's 23-year existence to an end. As the names indicated, CSX acquired the former New York Central Railroad main line from New York City and Boston, Massachusetts , to Cleveland, Ohio , and the former Cleveland, Cincinnati, Chicago and St. Louis Railway (NYC Big Four) line to Indianapolis, Indiana (continuing west to East St. Louis, Illinois ) on
12183-574: The newly formed Conrail , along with most of the Northeast Corridor . During the mid-1980s, due to the high cost of operating the New Haven–Springfield Line and the competing newly-constructed expressways, Amtrak removed 25 miles (40 km) of track, turning the line from a double-track line to a line with a single track with passing sidings. Of the 62 miles (100 km) between New Haven and Springfield, 23.3 miles (37.5 km) of double track and 38.7 miles (62.3 km) of single track were left. The final iteration of Inland Route service began with
12314-412: The noise they made on the tracks. There are many references to their use in central Europe in the 16th century. Such a transport system was later used by German miners at Caldbeck , Cumbria , England, perhaps from the 1560s. A wagonway was built at Prescot , near Liverpool , sometime around 1600, possibly as early as 1594. Owned by Philip Layton, the line carried coal from a pit near Prescot Hall to
12445-609: The number of the Amtrak train it is connecting to. In September 2019 Amtrak adopted the state of Connecticut’s Hartford Line branding for its trains on the line, replacing the Shuttle designation. The branding is shared with the state operated CTrail commuter trains which also serve the corridor. Together the two services make up the Hartford Line commuter rail program. The Connecticut Department of Transportation (CTDOT) and
12576-548: The old companies into solvent property-holding companies. The plan was unveiled on July 26, 1975, consisting of lines from Penn Central and six other companies—the Ann Arbor Railroad (bankrupt 1973), Erie Lackawanna Railway (1972), Lehigh Valley Railroad (1970), Reading Company (1971), Central Railroad of New Jersey (1967) and Lehigh and Hudson River Railway (1972). Controlled railroads and jointly-owned railroads such as Pennsylvania-Reading Seashore Lines and
12707-555: The only railroad to receive EMD SD80MACs (an order from the Chicago & North Western was cancelled when that company merged with Union Pacific ) and were separated evenly between CSX and NS. Conrail had a different paint scheme for these locomotives and also the SD70MAC , with a large white, cone-shaped line on the front, bearing "Conrail Quality" lettering. The SD70MACs were not fitted with marker lights, as they were ordered after
12838-504: The other from New York to Chicago. The two lines cross at a bridge southeast of downtown Cleveland ( 41°26′49″N 81°37′37″W / 41.447°N 81.627°W / 41.447; -81.627 ), where the former Cleveland and Pittsburgh Railroad crosses over the NYC's former Cleveland Short Line Railway around the south side of Cleveland. In three major metropolitan areas – North Jersey, South Jersey/Philadelphia, and Detroit – Conrail Shared Assets Operations continues to serve as
12969-551: The paint schemes of predecessor railroads. The first, on March 15, 2012, was GE ES44AC #8098 in Conrail blue with the "can opener" logo. In July 2023, CSX unveiled GE ES44AH unit #1976, which was repaired and repainted at the CSX shops in Waycross , GA with a CSX dark blue and yellow color scheme on the front (nose) and cab of the locomotive, and the light blue Conrail scheme with the Conrail Quality logo throughout
13100-525: The possibility of a smaller engine that might be used to power a vehicle. Following his patent, Watt's employee William Murdoch produced a working model of a self-propelled steam carriage in that year. The first full-scale working railway steam locomotive was built in the United Kingdom in 1804 by Richard Trevithick , a British engineer born in Cornwall . This used high-pressure steam to drive
13231-497: The railroad operated. There would be no more cross-subsidization of costs between route-miles (that is, revenue on profitable route segments were not used to subsidize routes where rates were set at intermodal parity, yet still did recover fully-allocated costs). Finally, where current and/or future traffic projections showed that profitable volumes of traffic would not return, the railroads were allowed to abandon those routes, shippers and passengers to other modes of transportation. Under
13362-621: The region, Penn Central (PC), declared bankruptcy in 1970, after less than three years of existence. Formed in 1968 by the merger of the New York Central Railroad and Pennsylvania Railroad (and supplemented in 1969 by the New York, New Haven and Hartford Railroad ), the PC was created with almost no plans to merge the varied corporate cultures, and the resulting company was a hopelessly-entangled mess. At its lowest point, PC
13493-455: The rest of the locomotive. It was numbered #1976 in homage to the year of Conrail's creation. In August 2023, MTA Metro–North Railroad unveiled locomotive #201, a GE P32AC-DM , wrapped in a yellow and blue scheme worn by Conrail's EMD FL9 units between 1976 and 1982. In October 2024, New Jersey Transit unveiled EMD GP40PH-2B #4208 in Conrail blue with the "can opener" logo, similar to Norfolk Southern #8098. NJT stated that Conrail
13624-491: The service was improved through increased capital investment , the economic basis of the railroad would be improved. During its first seven years, Conrail proved to be highly unprofitable, despite receiving billions of dollars of assistance from Congress. The corporation declared enormous losses on its federal income tax returns from 1976 through 1982, resulting in an accumulated net operating loss of $ 2.2 billion during that period. Congress once again reacted with support by passing
13755-441: The standard for railways. Cast iron used in rails proved unsatisfactory because it was brittle and broke under heavy loads. The wrought iron invented by John Birkinshaw in 1820 replaced cast iron. Wrought iron, usually simply referred to as "iron", was a ductile material that could undergo considerable deformation before breaking, making it more suitable for iron rails. But iron was expensive to produce until Henry Cort patented
13886-560: The successful bidder. After considerable debate in Congress, the Conrail Privatization Act of 1986 was signed into law by President Reagan on October 21, 1986. However, in August 1986, Norfolk Southern had withdrawn its bid citing Congressional delays and taxation changes. The government decided that its interest in Conrail would then be sold by the then-largest initial public offering in US history. The sale
14017-475: The time, was Liverpool and Manchester Railway , built in 1830. Steam power continued to be the dominant power system in railways around the world for more than a century. The first known electric locomotive was built in 1837 by chemist Robert Davidson of Aberdeen in Scotland, and it was powered by galvanic cells (batteries). Thus it was also the earliest battery-electric locomotive. Davidson later built
14148-543: The track. Propulsion for the train is provided by a separate locomotive or from individual motors in self-propelled multiple units. Most trains carry a revenue load, although non-revenue cars exist for the railway's own use, such as for maintenance-of-way purposes. The engine driver (engineer in North America) controls the locomotive or other power cars, although people movers and some rapid transits are under automatic control. Traditionally, trains are pulled using
14279-409: The tracks a viable option to consider. Amtrak runs Hartford Line trains between Springfield, Massachusetts , and New Haven, Connecticut . These trains connect with Northeast Regional or Metro-North New Haven Line service at New Haven's Union Station , usually by a cross-platform or same-track transfer. The Hartford Line trains are in the 400 series, with the last two digits usually denoting
14410-471: The transport of ore tubs to and from mines and soon became popular in Europe. Such an operation was illustrated in Germany in 1556 by Georgius Agricola in his work De re metallica . This line used "Hund" carts with unflanged wheels running on wooden planks and a vertical pin on the truck fitting into the gap between the planks to keep it going the right way. The miners called the wagons Hunde ("dogs") from
14541-530: The two railroads. In 1997, however, the two railroads struck a compromise agreement to jointly acquire Conrail and split most of its assets between them, with Norfolk Southern acquiring a larger portion of the Conrail network via a larger stock buyout. Under the final agreement approved by the Surface Transportation Board , Norfolk Southern acquired 58 percent of Conrail's assets, including roughly 6,000 Conrail route miles, and CSX received 42 percent of Conrail's assets, including about 3,600 route miles. The buyout
14672-629: The wheels on track. For example, evidence indicates that a 6 to 8.5 km long Diolkos paved trackway transported boats across the Isthmus of Corinth in Greece from around 600 BC. The Diolkos was in use for over 650 years, until at least the 1st century AD. Paved trackways were also later built in Roman Egypt . In 1515, Cardinal Matthäus Lang wrote a description of the Reisszug ,
14803-622: The world in 1825, although it used both horse power and steam power on different runs. In 1829, he built the locomotive Rocket , which entered in and won the Rainhill Trials . This success led to Stephenson establishing his company as the pre-eminent builder of steam locomotives for railways in Great Britain and Ireland, the United States, and much of Europe. The first public railway which used only steam locomotives, all
14934-512: Was a soft material that contained slag or dross . The softness and dross tended to make iron rails distort and delaminate and they lasted less than 10 years. Sometimes they lasted as little as one year under high traffic. All these developments in the production of iron eventually led to the replacement of composite wood/iron rails with superior all-iron rails. The introduction of the Bessemer process , enabling steel to be made inexpensively, led to
15065-602: Was accomplished by the distribution of weight between a number of wheels. Puffing Billy is now on display in the Science Museum in London, and is the oldest locomotive in existence. In 1814, George Stephenson , inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. Stephenson played
15196-691: Was approved by the Surface Transportation Board (STB) (successor agency to the Interstate Commerce Commission(ICC) and took place on August 22, 1998. Under the control of lawyer-turned-CEO Tim O'Toole , the lines were transferred to two newly formed limited liability companies , to be subsidiaries of Conrail but leased to CSX and Norfolk Southern, respectively New York Central Lines (NYC) and Pennsylvania Lines (PRR). The NYC and PRR reporting marks , which had passed to Conrail, were also transferred to
15327-408: Was bankrupt, but was somewhat stronger financially than the others. It was ruled reorganizable under Chapter 77 on April 30, 1974 (as had the Boston and Maine Railroad ), but on January 9, 1975, with no end to its losses in sight, its trustees reconsidered and asked for inclusion. The Final System Plan assigned a major section of the EL, from northern New Jersey west to northeast Ohio , to be sold to
15458-514: Was built by Siemens. The tram ran on 180 volts DC, which was supplied by running rails. In 1891 the track was equipped with an overhead wire and the line was extended to Berlin-Lichterfelde West station . The Volk's Electric Railway opened in 1883 in Brighton , England. The railway is still operational, thus making it the oldest operational electric railway in the world. Also in 1883, Mödling and Hinterbrühl Tram opened near Vienna in Austria. It
15589-706: Was built in 1758, later became the world's oldest operational railway (other than funiculars), albeit now in an upgraded form. In 1764, the first railway in the Americas was built in Lewiston, New York . In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the upper surface of the wooden rails. This allowed a variation of gauge to be used. At first only balloon loops could be used for turning, but later, movable points were taken into use that allowed for switching. A system
15720-572: Was called, provided interim funding to the bankrupt railroads and defined a new Consolidated Rail Corporation under the Association of American Railroads ' plan. The 3R Act also formed the United States Railway Association (USRA), another government corporation , taking over the powers of the Interstate Commerce Commission with respect to allowing the bankrupt railroads to abandon unprofitable lines. The USRA
15851-480: Was completed in 1858, but the Springfield route continued to carry most traffic until the bridge over the Thames River at New London, Connecticut , opened in 1889. The H&NH was merged into the New York, New Haven and Hartford Railroad (NYNH&H) in 1872, and the NYNH&H continued to operate regular service between New York City and Springfield over the line. Various services were also operated over
15982-459: Was divided between Norfolk Southern Railway and CSX Transportation in 1999, all remaining locomotives have been successively repainted, and many remain in service. CR units had unique features such as "Bright Future" blue paint, flashing ditch lights, and Leslie RS-3L horns. Another key spotting feature is ditch lights mounted under the locomotive's front deck. This is a preference different from Norfolk Southern and CSX, which order locomotives with
16113-568: Was effective from March 26, 1987, when Conrail's stock, worth $ 1.65 billion, was sold to private investors. Conrail inherited the commuter rail operations of its predecessor lines. It relinquished several during the 1970s, including the Erie Cleveland–Youngstown service (discontinued in 1977), the Pennsylvania Railroad Chicago–Valparaiso service (transferred to Amtrak in 1979), and the services within
16244-577: Was expensive, and Conrail faced financial difficulty. As mentioned above, significant projects took place to reduce trackage, oftentimes removing double-track with automatic block signals in favor of single track with centralized traffic control (CTC). Conrail also installed CTC across much of the former PRR multi-track mainline, which had relied on local towers to operate signals and control track. Conrail spent its entire existence installing tri-light signals (using NORAC rules) across much of its system. Many Conrail-installed signaling locations were removed in
16375-459: Was incorporated on February 1, 1974, and Edward G. Jordan, an insurance executive from California , was named president on March 18 by Nixon. Arthur D. Lewis of Eastern Air Lines was appointed chairman on April 30, and the remainder of the board was named on May 30 and sworn in on July 11. Under the 3R Act, the USRA was to create a "Final System Plan" to decide which lines should be included in
16506-548: Was introduced in which unflanged wheels ran on L-shaped metal plates, which came to be known as plateways . John Curr , a Sheffield colliery manager, invented this flanged rail in 1787, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks . In 1803, William Jessop opened the Surrey Iron Railway ,
16637-489: Was light enough to not break the edge-rails track and solved the problem of adhesion by a cog-wheel using teeth cast on the side of one of the rails. Thus it was also the first rack railway . This was followed in 1813 by the locomotive Puffing Billy built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This
16768-524: Was losing over $ 1 million a day and trains were becoming lost all over the railroad. In 1972, Hurricane Agnes damaged the rundown Northeast railway network and threatened the solvency of other railroads, including the somewhat more solvent Erie Lackawanna (EL). In mid-1973, officials with the bankrupt Penn Central threatened to liquidate and cease operations by year's end if they did not receive government aid by October 1. This threat to US freight and passenger traffic galvanized Congress to quickly create
16899-762: Was tested on the Edinburgh and Glasgow Railway in September of the following year, but the limited power from batteries prevented its general use. It was destroyed by railway workers, who saw it as a threat to their job security. By the middle of the nineteenth century most european countries had military uses for railways. Werner von Siemens demonstrated an electric railway in 1879 in Berlin. The world's first electric tram line, Gross-Lichterfelde Tramway , opened in Lichterfelde near Berlin , Germany, in 1881. It
17030-580: Was the first tram line in the world in regular service powered from an overhead line. Five years later, in the U.S. electric trolleys were pioneered in 1888 on the Richmond Union Passenger Railway , using equipment designed by Frank J. Sprague . The first use of electrification on a main line was on a four-mile section of the Baltimore Belt Line of the Baltimore and Ohio Railroad (B&O) in 1895 connecting
17161-413: Was under Crane's leadership that Conrail truly became a profitable operation. Soon after Crane took office in 1981 he shed another 4,400 miles from the Conrail system in the following two years, which accounted for only 1% of the railroad's overall traffic and 2% of its profits while saving it millions of dollars in maintenance costs. NERSA relieved Conrail of its requirement to provide commuter service on
#501498