Misplaced Pages

#431568

98-542: Ford Fairlane may refer to: Automobiles [ edit ] Ford Fairlane (Americas) , a car manufactured by the Ford Motor Company between 1955 and 1970 Ford Fairlane (Australia) , a car manufactured by the Ford Motor Company of Australia between 1959 and 2007 Two different models marketed as Ford Fairlane in Venezuela: Ford Torino ,

196-457: A triple in power delivery. As such, it also requires crank throws at 60° – . Such designs appear to have been limited to diesel engines such as the Detroit 71 series , marine engines, and outboard motors. Some of the 120 possible crankshaft configurations have useful properties. Still, all of them have a rocking imbalance that may or may not require a balance shaft, depending on

294-626: A 1.8 L flathead petrol engine used by the Opel 8/40 PS . The displacement of this engine was expanded as it was used in later models such as the Opel Kapitän and Opel Admiral , with later versions switching to an overhead valve (pushrod) design. In 1968, the straight-six versions of the Opel CIH engine were introduced, initially using a single overhead camshaft (SOHC) with some later versions using double overhead camshafts (DOHC). Production of

392-415: A 195 horsepower (145 kW) version of the 289 with a two-barrel carburetor and hydraulic lifters was introduced. The two-speed Fordomatic continued as the automatic transmission choice for the 260 in 1964, while 289 V8s got the three-speed Cruise-O-Matic transmission option. All 1965 models featured 14-inch (360 mm) wheels as standard, in place of the earlier 13-inch (330 mm) wheels, and Fordomatic

490-531: A V6 engine replaced it. The Nissan TB overhead valve engine was introduced in 1987 and produced alongside the other straight-six engines. The six-cylinder versions of the Prince G engine were introduced in 1963 and remained in production until 1969, three years after Prince's merger with Nissan. The 1969–1973 Nissan S20 dual overhead camshaft engine (used in the Nissan Fairlady and first generation of

588-569: A car manufactured by the Ford Motor Company marketed as the Fairlane between 1972 and 1976 Ford LTD II , a car manufactured by the Ford Motor Company between 1977 and 1979 Ford Fairlane 500 Skyliner , a car manufactured by the Ford Motor Company between 1957 and 1959 Movies [ edit ] The Adventures of Ford Fairlane , a 1990 movie starring Andrew Dice Clay, Priscilla Presley and Wayne Newton See also [ edit ] Fair Lane (disambiguation) Topics referred to by

686-500: A high-riser manifold, ram-air through the openings left by deleting the inboard headlights, equal-length headers, trunk-mounted battery, several fiberglass parts (hood, door skins, fenders, and front bumper), acrylic glass windows, and other lightweight options, including deleted rear-door window winders, carpeting, radio, sealant, sun visors, armrests, jack, lug wrench, heater, soundproofing, and passenger-side windshield wiper. The cars wore Fairlane 500 trim, and were only offered with

784-533: A lower-cost version of the Oakland six, powered by the Pontiac Split-Head Six flathead engine, which used two cylinder heads. This engine was replaced by the 1941–1954 Pontiac flathead six . The unrelated Pontiac OHV 6 overhead valve engine was produced in 1964–1965, based on a Chevrolet design. Pontiac's final straight-six engine was the 1966–1969 Pontiac OHC 6 overhead camshaft engine, which

882-455: A single overhead camshaft engine in 1979 and upgraded to dual overhead camshafts before production ended in 2008 (with the 1G-FE being the final variant). Nissan's first straight-six engine was the 1950–1952 Nissan NAK flathead petrol engine, which continued in various forms until production of the Nissan P engine ended in 2003. The 1963-1965 Nissan K overhead valve petrol engine was used in

980-415: A small floor console. The trim level supplemented the Fairlane and Fairlane 500 trim levels (the 500 model had more decorative trim, such as a wider chrome stripe down the side and three bullets on the rear quarter panels). The Challenger 289 CID engine was introduced in mid-1963, with solid lifters and other performance pieces helping the engine produce an advertised 271 hp (202 kW); however, it

1078-458: A small number of Fairlane two door hard tops prepared for drag racing during the 1963 season. These cars were running the 289 and were set up at Dearborn Steel Tubing that built the special cars for Ford special vehicle operations . These soon evolved into the "Thunderbolts" for 1964. The racing Thunderbolt was a two-door post car, heavily modified to incorporate Ford's new 427 CID (7.0 L) V8 race engine with two four-barrel carburetors on

SECTION 10

#1732776412432

1176-409: A standard 428 CID V8 rated at 335 bhp (250 kW), while options included bucket seats, hood scoop, clock, tachometer, power disc brakes, and 4.30:1 rear axle gearing. "Regular" Fairlanes and Rancheros continued, all with bucket-seat options. Ford's intermediates grew again in 1970, now with a 117 in (2,972 mm) wheelbase. At the start of the model year, only the Fairlane 500 remained as

1274-480: A steering column transmission gear selector lever. A new top-level full-sized model was introduced at mid-year 1959, the Ford Galaxie . The 1959 Galaxie displayed both "Fairlane 500" and "Galaxie" badging. Full-sized Fairlane and Fairlane 500 models were restyled for 1960 and again for the 1961 model year. The Galaxie series continued as the top-of-the-line full-sized Ford. Fairlane 500s demoted to mid-level in

1372-597: A straight six version of the Chrysler flathead petrol engine. This was replaced by the 1959–2000 Chrysler Slant-6 overhead valve straight-six petrol engine, which was so named due to the 30-degree angle used to reduce the height of the engine (with the trade-off of a wider engine). The Slant-6 was released in the Dodge Dart economy car and used in many models until a V6 engine replaced it after 30 years. The Chevrolet Stovebolt overhead valve straight-six petrol engine

1470-496: A straight-six engine compare favorably with the more common straight-four engines and V6 engines , which experience significant secondary dynamic imbalance, resulting in engine vibration. As engine reciprocating forces increase with the cube of piston bore, the straight-six is a preferred configuration for large truck engines. An even-firing six-cylinder two-stroke engine requires ignitions at 60° intervals, or else it would run with simultaneous ignitions and be no smoother than

1568-415: A straight-six was the 1961–1969 Alfa Romeo 2600 executive car before the company switched to V6 engines. Mercedes-Benz's history of straight-six engines began with the 1913 Mercedes D.I aircraft engine. The first automotive straight-six engine was the 1924–1929 Daimler M836 3.9 L petrol engine. Following World War 2, Mercedes resumed production of straight-six engines with the 1951 introduction of

1666-412: Is a piston engine with six cylinders arranged in a straight line along the crankshaft . A straight-six engine has perfect primary and secondary engine balance , resulting in fewer vibrations than other designs of six or fewer cylinders. Until the mid-20th century, the straight-six layout was the most common design for engines with six cylinders. However, V6 engines became more common in the 1970s. By

1764-541: Is different from Wikidata All article disambiguation pages All disambiguation pages Ford Fairlane (Americas) Initially introduced as the flagship of the full-size Ford range, the Fairlane marked the introduction of the Crown Victoria and 500 nameplates, both later becoming stand-alone full-size model lines (the latter, as the Ford Five Hundred ). Following the introduction of

1862-402: Is due to the front and rear trio of cylinders moving in pairs (albeit 360° out of phase), thus canceling out the rocking motion present in a straight-three engine . The secondary balance is due to the crank throws being arranged in three planes offset at 120°, resulting in the non-sinusoidal forces summing to zero for all free forces until the sixth order. The engine balance characteristics of

1960-464: Is the German brand BMW , which has always used a straight-six layout for its six-cylinder engines. Since 2017, the trend of switching to V6 engines has reversed due to the ability to create a modular engine family of straight engines sharing many components. Examples include the 2017–present Mercedes-Benz M256 engine , the 2019–present Jaguar Land Rover Ingenium engines (AJ300 and AJ300D versions),

2058-570: The BMW M337 (produced until 1958). Production of straight-six engines resumed in 1968 with the BMW M30 single overhead camshaft engine, built for 27 years and used in various models. The 1978–1989 BMW M88 engine was a double overhead camshaft design that was introduced in the BMW M1 mid-engine sport car. BMW's introduction of turbocharged straight-six engines (aside from the low-volume variants of

SECTION 20

#1732776412432

2156-508: The Duramax Straight-6 turbocharged diesel engine has been available in several General Motors SUV and light truck models since 2020. On March 25, 2022, Stellantis announced their new turbocharged straight-six engine, called Hurricane. Two outputs are available, a standard 400 or 500 hp (298 or 373 kW; 406 or 507 PS) high performance rated at 450 or 475 pound force-feet (610 or 644 N⋅m) of torque. The turbos on

2254-534: The Ford 240 I6 from 1965 through 1972. The Ford 300 cu in (4.9 L) version of the straight-six engine was built from 1965 until 1996, with notable uses in trucks, SUVs, and vans. However, Ford straight-sixes were replaced by V6 engines in passenger cars during the mid-1970s. In 1908, the Oldsmobile Model Z was powered by a flathead straight-six petrol engine, which was produced until 1912 (in

2352-674: The Ford Falcon large sedan was introduced with a locally-built version of the American Ford Straight-6 overhead valve engine. In 1998, these engines were upgraded to a single overhead camshaft design. This was followed in 2002 by the Ford Barra dual overhead camshaft engine in 2002, which was produced in both naturally aspirated and turbocharged versions. The Ford Barra engine remained in use until Ford Australia ceased local production in 2016. The Chrysler Valiant

2450-611: The Ford Galaxie , the Fairlane 500 (and Fairlane) became Ford's base models, equivalent to the Chevrolet Bel Air and Biscayne respectively, until 1962, when it was repackaged as an intermediate-segment car (today, mid-size ) from 1962 to 1970. For 1971, Ford expanded the Ford Torino nameplate across its entire intermediate range, dropping the Fairlane (and Falcon) nameplates in North America. In South America,

2548-686: The Mercedes-Benz M180 overhead camshaft engine. In 1985, the Mercedes-Benz OM603 3.0 L diesel straight-six engine was introduced. In 1996, the company replaced its petrol straight-sixes with a series of V6 engines, although it continued producing diesel straight-six engines. Production of petrol straight-six engines resumed in 2017 with the introduction of the Mercedes-Benz M256 turbocharged DOHC engine. Opel began production of straight-six engines in 1927 with

2646-659: The Nissan Cedric Special 50 luxury car. Using a similar design, the Nissan H30 engine was used in several luxury cars from 1965 through 1989. In 1966, Nissan began production of the six-cylinder versions of the Nissan L single overhead camshaft engine, which was produced until 2009. The 1985–2004 Nissan RB engine , used in the Nissan Skyline and several other cars, was produced in single overhead camshaft and dual overhead camshaft configurations until

2744-721: The Nissan Skyline GT-R ) was based on the Prince G engine. Mitsubishi produced six-cylinder versions of the Mitsubishi KE engine from 1963 to 1970, as well as the rare six-cylinder versions of the Mitsubishi 6G34 version of the single overhead camshaft "Saturn" engine from 1970 to 1976. The 2000–2006 Daewoo Magnus (also called the Chevrolet Evanda, Chevrolet Epica, Holden Epica, or Suzuki Verona)

2842-531: The Oldsmobile Limited luxury car) in displacements of 453 cu in (7.4 L), 505 cu in (8.3 L) and 706 cu in (11.6 L). Oldsmobile's next straight-six engine was introduced in the 1913 Oldsmobile Six luxury car, initially with a displacement of 380 cu in (6.2 L), followed by a displacement of 177 cu in (2.9 L) for the 1917-1921 Oldsmobile Model 37 luxury car. The later generations of

2940-536: The Oldsmobile Straight-6 also used a flathead design from its introduction in the 1923 Oldsmobile Model 30 luxury car until it was replaced in 1950 by Oldsmobile's V8 engine. The 1913–1929 Oakland Six luxury car was powered by a flathead petrol engine produced in displacements of 177 cu in (2.9 L) and 334 cu in (5.5 L). In 1926, the Pontiac Six was introduced as

3038-675: The 1938 Jaguar 3½ Litre sports saloon/coupe and the 1948 Jaguar Mark V luxury car. The 1927 Rover Two-litre luxury car introduced the company's IOE straight-six petrol engine. This engine was used in various Rover models until the Rover P5 was discontinued in 1973, and in various Land Rover models from the 1961 Land Rover Series IIA until 1980 Land Rover Series III . The 1928 Austin 20/6 luxury car introduced Austin's flathead straight-six petrol engine. The 1938-1939 Austin Twenty-Eight used an enlarged version of this engine. This

Ford Fairlane - Misplaced Pages Continue

3136-459: The 1998–2006 Volvo S80 ) used the uncommon design of a transversely-mounted straight-six engine. Production of Volvo straight-six engines ceased in 2015. BMW's first product was the 1917 BMW IIIa straight-six aircraft engine. The company began production of automotive straight-six engines in 1933 with the BMW M78 petrol engine, a 1.2 L overhead valve design that evolved over the years into

3234-465: The 2000s, V6 engines replaced most straight-six engines. In terms of packaging, straight-six engines are almost always narrower than a V6 engine or V8 engine , but longer than straight-four engines , V6s, and most V8s. Straight-six engines are typically produced in displacements ranging from 2 to 4 L (122 to 244 cu in), however engines ranging in size from the 0.7 L (43 cu in) Benelli 750 Sei motorcycle engine to

3332-569: The 2021–present Stellantis Hurricane engine and the 2022–present Mazda Skyactiv-X and Skyactiv-D engines. Alfa Romeo's first production straight-six engine - 6.3 L flathead petrol engine - was introduced in 1921 in the Alfa Romeo G1 luxury car. An overhead valve design was introduced in the 1922 Alfa Romeo RL sports car, and an overhead camshaft design was used in the 1927 Alfa Romeo 6C sports car and various racing cars from 1927 until 1954. The last Alfa Romeo model using

3430-481: The 390 CID V8 in two- and four-barrel versions. The 390 four-barrel was supplanted mid-year as the top performance engine by the 428 cu in (7.0 L) Cobra Jet, developing 335 bhp (250 kW). There was also a 428 cu in (7.0 L) Super Cobra Jet. For 1969, the Fairlane 500 , Ranchero, and Torino GT/GTA were also offered with the new 351W CID with a two-barrel producing 250 HP and only in

3528-401: The 6.7 L (409 cu in) Cummins B Series engine pickup truck engine have also been produced. Due to its well-balanced configuration, the straight-six can be scaled up to substantial sizes for heavy trucks, locomotives, industrial and marine use. If an appropriate firing order is used, a straight-six engine has perfect primary and secondary engine balance . The primary balance

3626-478: The Fairlane became a long wheelbase longer body version of the revised Falcon platform with the mid size wagon bodies common to both model lines. The appearance was changed to match the full-sized Ford Galaxie , which had been restyled in the 1965 model year, and adopted vertically stacked dual headlights. The XL, GT, and GTA packages were introduced, as well as a convertible to join the existing range of sedans, hardtops, and station wagons. The "K-code" 289 CID engine

3724-755: The Fairlane concept, now called the Ford Flex , debuted at the 2007 New York Auto Show, and entered production for the 2009 model year in summer 2008. Unlike the concept, the production model comes with seven seats. It is built on the Ford D3 platform , which is also used by the Ford Taurus , and Mercury Sable . It is intended to replace the people-mover capability of the Ford Freestar minivan. Straight-6 The straight-six engine (also referred to as an inline-six engine ; abbreviated I6 or L6)

3822-513: The Fairlane was based on the American LTD II . At the 2005 Auto Show circuit , Ford revealed a new concept car with the Fairlane nameplate. The "people-mover" Fairlane crossover utility vehicle concept featured three-row seating for six passengers, and previewed the chromed three-bar horizontal grill design, which also appeared on the 2006 Ford Fusion sedan and 2007 Ford Edge crossover utility vehicle." A production version of

3920-543: The Falcon front end styling to the Fairlane front end design. The 289 CID small-block was the base V8, with a 200 CID six standard, with the 390 CID optional (with either two- or four-barrel carburetor, at 275 and 320 bhp (240 kW), respectively). The 427s were still available, either with a single four-barrel carburetor or dual quad carbs, developing 410 (W-code) and 425 bhp (R-code), 427s were available on XL models, but very few were built. Adapted across

4018-660: The Ford outsold Chevrolet in 1957 for the first time since 1935. A new top trim level, the Fairlane 500 was added to the Fairlane model line and the Country Squire continued to be the luxury station wagon while the Country Sedan was now added to the Fairlane model line, while engine choices were largely the same as the year before. The big news for 1957 was the introduction of the Fairlane 500 Skyliner power retractable hardtop , whose solid top hinged and folded down into

Ford Fairlane - Misplaced Pages Continue

4116-739: The Hurricane Standard Output deliver a peak boost of 22 psi, while the Hurricane High Output turbos deliver 26 psi of peak boost. The 3.0 L Hurricane is produced at Stellantis’ Saltillo Engine Plant in Mexico. Toyota's first straight-six engine was the Toyota Type A , produced from 1935 through 1947. The Type A was an overhead-valve petrol engine based on the Chevrolet Stovebolt engine. This

4214-621: The LTD "Elite" option was introduced as the most luxurious made in Argentina. By the end of production in 1981, almost 30,000 Fairlanes had been made. Ford manufactured the Torino in Venezuela marketed as the Fairlane and Fairlane 500. These cars were identical to the U.S. Torino through 1976 and both base Fairlane and upscale Fairlane 500 used the 1973–1974 Torino base model grille. For 1977–1978

4312-505: The M30 engine in the 1980s) was in 2006 BMW N54 and the production of naturally aspirated engines ceased in 2015. As of 2022 , the BMW B58 turbocharged straight-six engine remains in production, along with its higher performance BMW S58 variants. Rolls-Royce's first straight-six engine was a 6.0 L IOE petrol engine, which was used in the 1905 Rolls-Royce 30 hp luxury car. This car

4410-667: The Opel CIH engine continued until 1993, when a V6 engine replaced it. Volvo began production of straight-six engines with the 1929–1958 Penta DB flathead petrol engines. The company resumed production in 1969 with the Volvo B30 overhead valve petrol engine, followed by the straight-six versions of the Volvo Modular Engine introduced in 1995 and then the Volvo SI6 engine introduced in 2006. Several models (such as

4508-647: The Plymouth Belvedere , and the AMC Rambler . With an overall length of 197 in (5004 mm) and a wheelbase of 115.5 in (2934 mm), it was 16 in (406 mm) longer than the Falcon and 12.3 in (312 mm) shorter than the Galaxie. Wheel track varied from 53.5 in (1355 mm) to 56 in (1422 mm) depending on model and specification. Like the Falcon, the Fairlane had a unibody frame, but

4606-473: The Sports Coupe got its own standard "spinner" wheel covers and extra exterior brightwork. Large "Sports Coupe" scripts graced the "C" pillars. The Fairlane Squire wagon was dropped, but the standard station wagon was continued. The 221 V8 was dropped after 1963, leaving the six as the base engine and the 260 as the base V8. The "K-code" 271-horsepower 289 V8 continued into 1964, gaining dual exhausts, while

4704-592: The Super Stock title (with Gas Ronda taking the honors ), and won the Manufacturer's Cup. The car as delivered was slightly too light to meet NHRA's 3200-lb (1451-kg) minimum weight unless it was raced with a full tank of gasoline, which would bring it to 3203 lb (1453 kg). NHRA rules at the time required a metal front bumper, so the cars began to be supplied with an aluminum bumper and previous purchasers were supplied with one. Thunderbolt production

4802-477: The Torino GT/GTA the 351W four-barrel with 290 HP could be ordered. The Ranchero coupe utility body style was available in standard, 500, and GT versions. The Cobra was introduced in 1969 as a competitor for Plymouth's Road Runner. Basic models featured the 302 CID V8 and three-speed manual transmission as standard. Options included the 390 CID and two 428 cu in (7.0 L) V8s. The Cobras had

4900-525: The application. The six pistons with six unique phases cannot be "paired" as in the four-stroke case. The Detroit engines used a configuration that, once the primary rocking couple was balanced out, was also perfectly balanced at all other rocking couples until the 6th order. Mercury came to use a configuration that canceled only the primary rocking couple and was run without a balancer. The reciprocating masses of all configurations are still imbalanced at only 6th-order and up in their plane of motion. Still,

4998-465: The balance of kinetic energy exchange between pistons has improved to a residual 6th-order-and-up inertial torque oscillation compared with the four-stroke design being imbalanced at 3rd-order and up. Crankshafts for straight-six engines usually have either four main bearings (i.e., a bearing in between each pair of crankpins and one at each end) or seven main bearings (i.e., a bearing between every crankpin): The first production straight-six engine

SECTION 50

#1732776412432

5096-498: The base or the 500 trim. Base hardtop sales more than doubled, to 44,683 units. The base engine was the 200 cu in (3.3 L) I6, with several optional V8s. Early production 1968 base V8 Fairlanes were equipped with the two-barrel 289 cu in (4.7 L), while later units came with the 302 cu in (4.9 L). The GTs were part of the Torino range, with the 302 CID V8 standard, with optional engines being

5194-530: The base trim model in what was now effectively the Torino series. The straight six-cylinder was the economy power, while largest engine was now a 429 cu in (7.0 L) with four-barrel carburetor and 360 bhp (270 kW). Different heads were optional and gave the Cobra 370 bhp (280 kW) and higher compression. Other options included the Cobra Jet Ram Air 429, though Ford quoted

5292-399: The block letters on their hoods. The big-block 390 CID V8 was available in 1961 as the top-horsepower option, as the "horsepower wars" in Detroit continued. The Fairlane name was moved to Ford's new intermediate, introduced for the 1962 model year, to bridge the gap between the compact Ford Falcon and the full-sized Galaxie , making it a competitor for GM's A-body "senior compacts" ,

5390-420: The body incorporated an unusual feature Ford dubbed torque boxes, four boxed structures in the lower body structure designed to absorb road shock by moving slightly in the vertical plane. Suspension was a conventional short-long arm independent arrangement in front, with Hotchkiss drive in the rear. The Fairlane was initially offered only in two-door or four-door sedan body styles. The Fairlane's standard engine

5488-416: The cars they replaced. A fastback Sportsroof model was introduced in the Fairlane 500 series, as well as a more luxurious Torino model at the top of the intermediate range, contributing 172,083 of the Fairlane's 371,787 units sold that year. In a cost-saving decision, the station wagons carried over the 1966-67 bodies from the cowl back. The Ranch Wagon model name was deleted; Fairlane wagons had either

5586-424: The deluxe models and rectangular taillight lenses, a return to the 1962-1963 trunk lid, along with less chrome on the body and a small standup hood ornament. Australian and New Zealand models had longer cut-outs in the rear bumper to accommodate their license plates. Australian models had the "reverse light" tail light which was used for an amber rear turn signal. As the muscle car market took shape, Ford built

5684-430: The door glass and rear side glass, while the higher trim level Fairlanes were pillarless two-door hardtops, similar to the convertibles. A redesign was introduced for the 1968 model year, and continued the similarity to the Ford Galaxie series. The wheelbase remained at 116 in (2,946 mm), but it grew in other dimensions. They were about four inches (102 mm) longer and 200 lb (91 kg) heavier than

5782-476: The engine/transmission combination for NHRA and IHRA Super Stock racing, they were white and had fiberglass hoods with a forward-facing hood scoop which ended at the edge of the hood. The Fairlane Squire wagon was reintroduced for 1966. Minor trim changes were introduced for 1967 as the Fairlane was mildly facelifted. For the 1967 model year the Ranchero pickup based on the same platform switched from using

5880-478: The entire range of Ford models for 1967, Fairlanes included a number of federal government-mandated safety features, including a new energy-absorbing steering column with a large padded steering wheel hub, soft interior trim, four-way hazard flashers, a dual-chamber braking system, and shoulder belt anchors. The convertible had a tempered safety glass rear window. Two different two-door coupe models were offered. The lower-end Fairlane Club Coupe had pillars separating

5978-469: The lineup and were equivalent to the Chevrolet Bel Air . Fairlanes were primarily sold as base level trim models for fleet use (taxi, police). Two bodystyles were available, a 2-door pillared sedan (Club Sedan and Business Sedan) and a 4-door pillared sedan (Town Sedan). While the 1960 de luxe Galaxie and Fairlane 500 series sported a tri-color Ford crest on the hood, base Fairlanes had "FORD" in chrome block letters across their hoods. For 1961, all models got

SECTION 60

#1732776412432

6076-422: The problem and introduced two pillarless hardtop coupes for 1963, in Fairlane 500 and Sports Coupe trim. For 1963 and later Sports Coupe models, the center console, which had come from the Falcon parts bin for 1962, was changed to be similar to that of the Galaxie. Sports Coupe models got a floor-mounted shift lever for the center console when Cruise-O-Matic or 4-speed manual transmissions were specified; however when

6174-467: The regular Crown Victoria coupe with much stainless steel trim, a convertible Sunliner, the Victoria hardtop coupe, and traditional sedans. All featured the trademark stainless-steel "Fairlane stripe" on the side. Power options were a 223 cu in (3.7 L) straight-6 engine and a 272 cu in (4.5 L) V8 . The 292 cu in (4.8 L) Y-block was offered as an option and

6272-515: The same power output, and the Drag Pack rated at 375 bhp (280 kW). However, the 1970s were slower than the 1969s, and race teams were forced to run the older models. The Falcon name was transferred from Ford's now discontinued, in the US, compact to a basic, even lower-trim version of the intermediate platform as a "1970½" model on January 1, 1970. This series included a two-door sedan which

6370-423: The same term [REDACTED] This disambiguation page lists articles associated with the title Ford Fairlane . If an internal link led you here, you may wish to change the link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=Ford_Fairlane&oldid=1250713275 " Category : Disambiguation pages Hidden categories: Short description

6468-551: The sixth generation Fairlane was marketed through 1981; Ford Australia used the nameplate on its own version of the Fairlane (a long-wheelbase Ford Falcon ) through the 2007 model year. For the 1955 model year the Fairlane name replaced the Crestline as Ford's premier full-sized offering. Six different body styles were offered, including the Crown Victoria Skyliner with a tinted, transparent plastic roof,

6566-484: The trunk space at the touch of a button, while the Ford Ranchero 2-door coupe utility was also introduced. Another facelift for 1958 had fashionable quad headlights, a grille that matched the 1958 Thunderbird , and other styling changes. New big-block FE V8s of 332 and 352 CID (5.4 L and 5.8 L) replaced the previous largest V8s, and a better three-speed automatic transmission was also available with

6664-689: The two-door sedan body. This special model, of which 111 to 127 total were made (sources disagree), delivered 657 hp (490 kW) at 7,500 rpm and was known as the Thunderbolt . Racing in NHRA Super Stock (which required only fifty cars be available to the public ), on 7-inch (180 mm)-wide tires, the Thunderbolt was based on the midlevel Fairlane 500 two-door pillared sedan, and in 1964 set elapsed time and top speed records at 11.6 seconds and 124 mph (200 km/h). took

6762-674: The two-speed Fordomatic was ordered, the shift lever was installed on the steering column (and the console was the same without the shifter). Front-end styling for the 1963 models mimicked the big Galaxie models, but the rear end retained the small tailfins and "pieplate" tail lamp styling cues. The Squire wagon (a fake woodie ) was available for 1963 only, including one model with front bucket seats. The "Swing-Away" steering wheel became an option in 1964. The 1964 and 1965, Fairlane ranges consisted of similar body styles: base Fairlane and Fairlane 500 two-door coupes and four-door sedans , and Fairlane 500 and Sports Coupe two-door hardtops. As in 1963,

6860-528: Was built in Argentina from 1969 to 1973 and the 1969 body style from 1973 to 1981 under the Fairlane name with three equipment packages: Standard, 500 and LTD. The car was similar to the American model except the engines. The two options were a 221 CID 6-cylinder with 132 hp (98 kW), and the old 292 phase I (1969–1971) CID "Y-block" V8 which had been last used in the 1964 F-Series truck; it

6958-566: Was called the Thunderbird V-8. The Fairlane 4-door Town Sedan was the most popular sedan Ford sold that year, having manufactured 254,437 with a listed retail price of US$ 1,960 ($ 22,293 in 2023 dollars ). Few changes were made for 1956; a four-door Victoria hardtop and two new, more powerful V8 options, of 292 cu in (4.8 L) and 312 cu in (5.1 L), the latter available up to 225 bhp (168 kW; 228 PS), were introduced. The Lifeguard safety package

7056-752: Was dropped this year. The GT featured a 390 CID FE V8 as standard, while the GTA also included the newly introduced the SportShift Cruise-o-Matic automatic transmission. The GT/GTA 390 CID engine developed 335 bhp (250 kW) with higher compression, and had a four-barrel carburetor. Mid year, Ford produced 57 special Fairlane 500 two-door hardtops with "R-code" 427 cu in (7.0 L) V8 engine rated at 425 bhp (431 PS; 317 kW) at 6000 rpm and 480 lb⋅ft (651 N⋅m) at 3700 rpm of torque , equipped with Ford's "Top-Loader" four-speed manual transmission. Built to qualify

7154-806: Was ended due to NHRA rule changes for Super Stock competition, requiring 500 vehicles be built to be entered in that class. Ford had been losing $ 1500 to $ 2000 on each Thunderbolt sold at the sticker price of $ 3900. The first 11 Thunderbolts were painted maroon (known as Vintage Burgundy in Ford literature), the rest white; 99 had manual transmissions. Many are still raced. About 50 similar Mercury Cyclones were also produced by Ford in 1964, destined to be modified to represent Ford in A/FX competition, which they dominated, as well. These vehicles varied greatly in wheel track due to customer options for varying suspension and wheel/tire combinations. Front tracks from 54 to 56 in and rear tracks from 53.5 to 55.5 in were common. For 1966

7252-499: Was equipped with single exhaust like the less powerful engines. This engine was coded "K" in the vehicle identification number . Exterior identification was by fender-mounted "V" badges that read "289 High Performance". That same year, station wagons arrived, called the Ranch Wagon and Ranch Custom Wagon. All 1962 Fairlanes had "B" posts despite the popularity of the pillarless hardtop and convertible styles in that era. Ford saw

7350-501: Was finally phased out, leaving the Cruise-O-Matic as the only automatic available for the Fairlane. The 260 was also dropped after 1964, leaving the two-barrel 289 as the base V8. Styling-wise, in 1964, a new grille and headlight bezels were introduced, the tail fins were dropped, some chrome decorating on the side was changed, and the shape of the trunk lid changed. Styling features for 1965 included body-color headlight bezels for

7448-469: Was followed by an IOE version in 1916. The 1951 Hudson Hornet introduced a 308 cu in (5.0 L) flathead straight-six engine. These engines dominated dirt track and NASCAR racing at the time. Production of the Hudson I6 continued after the 1954 merger forming American Motors Corporation and was eventually replaced by a new Rambler V8 after 1956. In 1924, Chrysler began production of

7546-589: Was followed by the AJ6 and AJ16 engines, produced from 1984 to 1996, before being replaced by a Ford-derived V6 engine. The 1948–1959 Lagonda straight-6 dual overhead camshaft petrol engine was used in various Aston Martin and Lagonda cars. This engine's successor was the Tadek Marek-designed straight-six used in the DB4 (1958), DB5 (1963), DB6 (1965) and DBS (1967). The Ford Zephyr 6 overhead valve engine

7644-412: Was followed by the 1962–1988 Chevrolet Turbo-Thrift engine (also using an overhead valve design), which was replaced by various General Motors V6 engines. The 1952 through 2006 AMC Straight-6 petrol engine initially used a flathead design before being upgraded to an overhead valve design in 1956. A new I6 design with a short stroke and seven main bearing crankshaft was introduced in 1964. The engine

7742-423: Was followed by the first generation Toyota F overhead valve engine, which was produced from 1949 to 1975, which in turn was followed by the 2F version from 1975 to 1988 and the fuel-injected 3F / 3FE version from 1988 to 1992. This was replaced by the dual overhead camshaft Toyota FZ engine , produced from 1993 until 2008. Produced alongside these engines was the single overhead camshaft Toyota M engine , which

7840-498: Was improved with a new admission very similar to that of the small block 289, 302 pistons maximum compression with lomo brand Buxton were used, raising the compression at 8 to 1, allowing the engine erogue 185 HP at 4500 rpm, another improvement were leaks with individual manifold runners, eliminating the original American system of a manifold connected to another in series, used in trucks, in cars they were always individual. Distributors are different in coupling, calling FASE II . In 1978,

7938-531: Was introduced in 1929 as a replacement for the brand's straight-four engines and was produced in displacements of 181 cu in (3.0 L), 194 cu in (3.2 L) and 207 cu in (3.4 L). The second generation of this engine family - often referred to as the Blue Flame engine - was produced from 1937 to 1962 in displacements of 216 cu in (3.5 L), 235 cu in (3.9 L) and 261 cu in (4.3 L). This

8036-407: Was introduced in 1965 and produced over seven generations until 1993 (with the 7M-GTE being the final version of the M engine). The M engine was replaced by the dual overhead camshaft Toyota JZ engine , which was produced from 1990 to 2007 and is arguably known as Toyota's best straight-six engine. Toyota's third line of straight-six engines was the 2.0 L Toyota G engine , which was released as

8134-670: Was introduced in the Willys Jeep Station Wagon . At the time of its introduction, the Tornado engine had the lowest specific fuel consumption of an American gasoline (petrol) engine. The Tornado engine was replaced by the AMC I6 engine. In 2001, General Motors resumed production of straight-six engines with the Vortec 4200 dual overhead camshaft petrol engine. This engine was used in various SUV models until 2009. Also,

8232-647: Was introduced in the Dutch Spyker 60 HP racing car in 1903. Straight-six engines increased in popularity in the years after and by 1909, approximately 80 manufacturers were using them (including 62 in the United Kingdom). Prior to the 1950s, V6 engines were rarely used, due to the poorer engine balance of V6 engines compared to straight-six engines. Since the 1980s, however, the shorter length of V6 engines has seen most manufacturers replace straight-six engines with V6 engines. An exception to this trend

8330-475: Was introduced. The two-door Victoria hardtop featured a new and slimmer roofline. A one-year only two-door station wagon, the 1956 Ford Parklane , featured Fairlane-level trim. It was marketed to compete against the Chevrolet Nomad . For 1957, a new style gave a longer, wider, lower, and sleeker look with low tailfins . The new proportions and modern styling were a hit with customers to the extent that

8428-472: Was not available in the higher trim lines. For 1971, the Falcon and Fairlane 500 names were dropped, as all of the intermediate models took the Torino name. The Falcon and Fairlane names continued to be used in Australia through to the 21st century. The Fairlane name continued to be used in Venezuela through 1978 on corresponding Ford Torino and LTD II models. The four-door sedan of the 1968 body style

8526-527: Was powered by a 1.3-1.6 L overhead camshaft straight-six petrol engine. The 1931–1932 MG F-type tourers, 1932–1934 MG K-type sports cars, and 1934–1936 MG N-type sports cars were powered by an overhead camshaft straight-six petrol engine. During the mid-1930s, the Riley MPH sports car and Riley Kestrel 6 saloon were produced in small numbers and were powered by dual overhead camshaft straight-six petrol engine. The 1947 Bristol 400 luxury car

8624-613: Was powered by an overhead valve straight-six petrol engine based on the design of the BMW M328 engine. This engine remained in use until the Bristol 406 was discontinued in 1961. The dual overhead camshaft Jaguar XK6 engine petrol engine was produced from 1948 to 1992 in the Jaguar XK120 sports car. Introduced as a 3.4 L, it was used in passenger and racing cars, produced in displacements of 2.4 to 4.2 L. The XK6 engine

8722-573: Was powered by the Daewoo XK6 straight-six petrol engine, which is one of the few straight-six engines to be used in a transverse engine front-wheel drive car. From the 1950s to the 2010s, many cars produced in Australia were powered by a straight-six engine. Holden's first car, the 1948 Holden 48-215 sedan, was powered by the Holden 'grey' motor , an overhead valve petrol engine. This engine

8820-525: Was rated at 185 hp (138 kW), in 1971 the Ford Motor Company Argentina decided to make an improvement on the 292, was started by the covers mainly the problem of spark plugs was solved by giving an inclination towards the front of the engine that allowed an easier extraction in the car, changed the opening order and exhaust cam, valves larger intake (of the 292 heavy duty American) were placed, fuel lines making them more direct

8918-419: Was replaced by Chevrolet's straight-six engine and Buick's V6 engine. a The overhead valve Buick Straight-6 petrol engine was introduced in the 1914 Buick Six luxury car and was produced until 1930. Buick did not make another six-cylinder engine until they introduced a V6 engine in 1962. The 1916 through 1926 Hudson Super Six was powered by a 289 cu in (4.7 L) straight-six petrol engine. This

9016-605: Was replaced by the Austin D-Series engine , an overhead valve engine initially designed for trucks, which was used in passenger cars from 1947 until 1968 (along with several Jensen Motors models from 1946 to 1962). The overhead valve BMC C-Series was used by various BMC brands from 1954 to 1971, followed by the 2.2 L version of the BMC E-Series overhead camshaft engine, which was produced from 1970 until 1982. The 1930–1936 Wolseley Hornet six lightweight car

9114-532: Was replaced by the Holden 'red' motor , which was produced from 1963 to 1980 and in turn followed by the 1980–1984 Holden 'blue' motor . The final locally produced Holden straight-six was the 1984–1986 Holden 'black' motor , which was initially replaced by the Japanese-built Nissan RB30 engine before Holden switched to a locally-built V6 engine. Ford produced straight-six engines for the longest time of any Australian manufacturer. In 1960,

9212-479: Was replaced by the 1906–1926 Rolls-Royce Silver Ghost , which switched to a flathead (side-valve) design for its straight-six engine. In 1906, the Standard Six luxury car was introduced, powered by a 20 hp (15 kW; 20 PS) I6 petrol engine. Standard's engines were also used in several cars built by SS Cars and its successor Jaguar, such as the 1932 SS 1 sports car, the 1936 SS Jaguar 100 and

9310-467: Was rugged, reliable, and became noted for longevity. A turbocharged racing engine based on the AMC Straight-6 engine block produced 875 hp (652 kW) and competed in the 1978 Indianapolis 500 race. The final application for the AMC Straight-6 engine was the 2006 Jeep Wrangler (TJ) , after which a V6 replaced it. The 1962 through 1973 Jeep Tornado overhead camshaft straight-six engine

9408-402: Was the 170 CID (2.8 L) six , but as an option, it introduced Ford's new, lightweight small-block Windsor V8 , initially with a displacement of 221 CID (3.6 L) and 145 hp (108 kW); a 260 CID (4.2 L) "Challenger" version with an advertised 164 hp (122 kW) was added at mid-year. The Sports Coupe option débuted mid-year and featured bucket seats and

9506-575: Was used in several of the company's sports cars. The 1906–1908 Ford Model K luxury car used a 405 cu in (6.6 L) straight-six petrol engine and was the only Ford six-cylinder passenger car engine until the 1940s. The Ford flathead I6 was produced from 1941 until 1951, followed by the Ford OHV I6 overhead valve engine from 1952 through 1964, then the Ford Thriftpower Six overhead valve engine from 1960 until 1982, and

9604-742: Was used in the Ford Zephyr executive car and several other models from 1951 to 1966. The Triumph I6 overhead valve straight-six petrol engine was produced from 1960 to 1977 and debuted in the Standard Vanguard Six sports saloon. The Leyland PE166 engine was loosely based on the Triumph design and was produced from 1977 to 1986. The 1972–1977 TVR 2500M sports car was powered by the Triumph I6 engine. Then, from 1999 to 2007, TVR's own TVR Speed Six dual overhead camshaft engine

#431568