The Mazda Familia ( Japanese: マツダ ファミリア , Matsuda Famiria ) , also marketed prominently as the Mazda 323 , Mazda Protegé and Mazda Allegro , is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3 /Axela for 2004.
136-706: The Mazda Capella , also known as the 626 in Europe, North America and Southeast Asia, is a mid-size car that was manufactured by Mazda from 1970 until 2002. Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626 . Ford , Mazda's partner at the time, also used the Capella platform to create the Ford Telstar and Ford Probe . 4,345,279 of
272-604: A vehicle size class which originated in the United States and is used for cars larger than compact cars and smaller than full-size cars . "Large family car" is a UK term and a part of the D-segment in the European car classification. Mid-size cars are manufactured in a variety of body styles, including sedans , coupes , station wagons , hatchbacks , and convertibles . Compact executive cars can also fall under
408-414: A "long nose" 2.0-litre five-door model with a higher trim level including a digital instrument panel. A small number of two-door coupés were imported built-up from Japan. Laminated windscreens were now standard. A midlife facelift for the 1985 model year brought a completely new dashboard with orange digital LCD electronic displays in top models (in place of the earlier luminescent green) and the sedan now had
544-672: A "panel van" by Mazda) was added in early or mid 1965. A new Familia 1000 coupé arrived in November 1965, with a 985 cc SOHC "PC" engine, and was joined by the larger Mazda Luce in 1966. Around the same time, the 800 engine was upgraded, adding three horsepower. As a number of new 1-liter vehicles were introduced by Mazda's competitors, another 987 cc OHV engine (PB) appeared in January 1967, powering new 1000 sedan and van versions. The 1-liter sedans and vans are recognizable by their broader, rounded-off rectangular headlights. Production of
680-424: A Japanese car. It immediately sold very well across Europe. Sedan and coupé bodystyles were offered as before, with – due to demand – a five-door hatchback variant added. Inline-four engines displacing 1.6, 1.8, and 2.0 litres were offered, with the 2.0-litre also available with a turbo and 145 PS (107 kW). In September 1983 a 2.0-litre diesel was added to the lineup. In other regions including Finland,
816-405: A coil sprung solid axle at the back mounted on four links with a transverse Panhard rod providing addition location. Either a five-speed manual or three-speed automatic transmission and recirculating ball steering completed the mechanical specification. The CB also featured a split-folding rear seat. In Japan, the Capella came with 1.6-, 1.8-, or 2.0-litre engines (the 2.0 only being introduced in
952-806: A facelifted version continued in production by Samcor until 1993. This featured the front end of the GD coupé, but with amber lens indicators and a blanked-off grille, as well as the rear lights from the Ford Telstar , which was not sold locally, Ford still offering the Sierra. The GD was not sold in South Africa, although it was assembled in neighbouring Zimbabwe by Willowvale Motor Industries in both sedan and wagon versions. The 626 L entered production in Colombia with CCA ( Compañía Colombiana Automotriz ) in May 1984, as
1088-495: A four-door sedan equipped with the 92 PS 1.8-litre engine. The LX (five-door) and GLX (coupé) versions followed in 1985, with the GLX coupé receiving the 102 PS 2.0-litre engine and more luxurious equipment including power steering and windows, as well as digital instrumentation. In the first quarter of 1986 the range was facelifted: the taillights were revised and the hatchback and coupé received new, larger bumpers. The L (sedan)
1224-629: A larger "Mazda 700" prototype was shown at the eighth Tokyo Motor Show in 1961, and formed the basis for the upcoming Mazda Familia. Meanwhile, the four door version of the R360 was introduced as the Mazda Carol , which appeared in 1962, and discontinued in 1964. The first production Familia, styled by a young Giorgetto Giugiaro while working at Carrozzeria Bertone , appeared in October 1963. In line with Mazda's policy of only gradually approaching
1360-597: A locally assembled limited edition model called the Anniversary to mark 10 years of local build. Based on the Limited, this model had larger US-style bumpers, additional driving lights in the grille, a standard AM radio (this was a year before FM stereo radio was introduced in NZ) plus alloy wheels and unique velour upholstery. This was also the first locally-built Mazda to have a laminated windscreen as standard. In Australia,
1496-412: A long-wheelbase version, and still featured an 85 PS (63 kW) (SAE gross) version of the 1.3-litre TC engine, unaffected by the tighter Japanese emissions standards for passenger cars. The "1200" was offered in the United States in 1971 and again for the 1973 model year. US-market models had round sealed-beam headlamps mounted in pill-shaped bezels fitting the original openings. The 1971 version
SECTION 10
#17327978688641632-469: A manual-only GD series sedan, called the Telstar Classic, aimed at fleet customers. The Capella station wagon was still available up until November 1997 (1996 in export markets). As part of a Japanese trend at the time, it was also developed into an "RV", a sporting model with off-road pretensions. The Capella Van version, for commercial use only, actually continued in production until April 1999. It
1768-405: A manual-only coupé. The 616 was also built but was much less popular. In South Africa, where the Capella was assembled first by Illings and then by Sigma , it was available with the 1600 or 1800 reciprocal engines as well as the rotary. The rotary claimed 97 kW (132 PS; 130 hp) SAE in South Africa. The facelift version arrived two years late there, in mid-1976. At the end of that year,
1904-987: A quartet of Porsche 911s . The Familia also placed fifth at the Marathon de la Route at Nürburgring in 1969, the same race that the Cosmo had bowed at the previous year. Finally, Mazda took the Familia home for the Suzuka All-Japan Grand Cup, where it won easily. For 1970, the Familia placed eighth at the RAC Tourist Trophy in June, followed by a fourth place at the West German Touring Car race in July. At Spa, four Familias were present, battling with BMW Alpinas , and Alfa Romeos for
2040-421: A redesigned hood (raised centre portion), chrome grille fairing (attached to the hood), and the introduction of the on Board Diagnostics II revision (OBD-II). In Colombia the car was named 626 Matsuri (Japanese for "holiday") to differentiate from the past version that was sold at the same time. Mazda New Zealand assembled this generation for four years with few changes. Ford's variants (since 1987 all built in
2176-558: A rotary-engined 323 in the South African national rally championship. In Indonesia the third-generation Familia was marketed by Indomobil Group twice, the first time as the 323 hatchback from 1977 to 1980, and the second time around as the low-cost alternative of the popular Toyota Kijang and fellow Indomobil Group product's Suzuki Carry Extra/Futura; low-price "Mazda MR90" (hatchback) between December 1990 to 1993, "Mazda Baby Boomers" (hatchback) between 1993 and 1995, and as
2312-556: A seven-seat option in some markets. Five-speed manuals and four-speed automatics were offered, with a few export markets also receiving a four-speed manual. Four-wheel drive was introduced in July 1987 for some versions, although it was never made available in the coupé nor in the North American market. Another new option was 4-wheel-steering , introduced in February 1988, with Mazda's system being electronic and more complex than
2448-447: A subwoofer among other things. The Turbo was equipped in similar fashion to the LX, adding an intercooler turbocharger system, adjustable dampening, and 15-inch alloy wheels. The 626/Capella was available globally as a sedan, station wagon (estate), five-door hatchback, and as a coupé – although the coupé was renamed MX-6 for the North American and Australian markets. In Japan, the five-door
2584-416: A time a signature design element for the rotary engined versions of Mazda's cars. Inside, the cars were more sumptuously appointed with plusher seats and chrome plated accents, full sized interior door trim panels, a floor mounted handbrake lever, and a unique cockpit styled dashboard with full instrumentation. Mazda referred to this dashboard as the "T-Dash", and fitted it to top spec piston engined variants of
2720-434: A variable ratio steering rack, to minimize the effects of the (slight) additional weight. European markets also received a 1.6-litre F6 80 PS (59 kW) engine. The placement of the power window controls was on the centre console, ahead of the gear shift/automatic transmission gear selector, as opposed to the traditional installation of the window switches on the respective doors. Ford Asia Pacific (FASPAC) also sold
2856-414: Is Japanese-made, with a 2.0-litre four-cylinder DOHC -engine ( FS ) and a four-speed automatic transmission, which produces 125 hp (93 kW) at 6,000 rpm and 133 lb·ft (180 N·m) at 4,000 rpm. The 2.0-litre turbo-diesel version was added to European market versions beginning in fall of 1998. The European trim levels are LXI, GXI, GSI, GXI SPORT, Atlantis, GXI SE, GSI SE. The European 626
SECTION 20
#17327978688642992-701: Is better known by its export market names Mazda 808, 818, and RX-3. The Grand Familia was also built by Kia with the 1272 cc engine from October 1975, originally as the Brisa II and later as the K303. A facelifted version of the Familia Presto was announced in September 1973, a month before the 1973 oil crisis . It was basically an updated version of the 1970 Familia Presto, reintroduced with 60 mm wider bodywork and reworked front and rear designs. It
3128-580: Is known as "Asahi" in Colombia. The gearing was shorter than for the GC versions, to better suit the mountainous nature of the country. Mazda New Zealand again assembled a range of four-door sedan and five-door hatchback models, supplemented by the newly available wagon, and imported the four-door sedan in GT Spec with 2.0-litre FE-DOHC. The imported coupe and top five-door version, both with electronically controlled rear-wheel steering. Ford New Zealand's Telstar line
3264-804: The Ford Escort and Mercury Tracer in North America. In addition, the Familia name was used as the Mazda Familia Wagon/Van , a badge-engineered version of the Nissan AD wagon (1994–2017) and Toyota Probox (2018–present). Mazda Familias were manufactured in the Hiroshima Plant and also assembled from " knock-down kits " in various countries including Taiwan, Indonesia, Malaysia, South Africa, Zimbabwe, Colombia, and New Zealand. Some of these plants kept manufacturing
3400-662: The Ford LTD II and the Plymouth Fury . A comparison test by Popular Science of four intermediate sedans (the 1976 AMC Matador, Chevrolet Malibu , Ford Torino, and Dodge Coronet ) predicted that these will be the "big cars of the future." By 1978, General Motors made its intermediate models smaller. New "official" size designations in the U.S. were introduced by the EPA , which defined market segments by passenger and cargo space. Formerly mid-sized cars that were built on
3536-635: The Ford Laser (and Ford Meteor, for its four-door sedan model in Australia). At its introduction in 1980, it won the first Car of the Year Japan Award. The new Mazda E engine -series, loosely based on the preceding PC/TC/UC series, was developed expressly for the BD and was offered in three different displacements. The smallest 1.1-liter E1 unit was reserved for certain export markets where
3672-653: The GCC countries. A dealer optional model with the front end and pop-up headlights from the Mazda 929/Cosmo (HB) was also available to special customers in Indonesia. The rear suspension was now independent , and though the wheelbase remained the same as the previous model, it was an entirely different car. A SOHC non-turbo diesel 2.0-litre RF 66 PS (49 kW) engine was made available; twenty examples were imported officially into Australia from 1983 to 1987. The diesel also benefitted from ventilated brakes up front and
3808-550: The Japanese asset price bubble from 1985 to 1991. While the MS-6 shared the Cronos GE platform, it was marketed as the more sporty of the two. The Capella badge lived on with the wagon/van versions on the previous GV series until 1999. Until 1989, Japanese car taxation used a car's width as a key determinant. The Cronos and its siblings all exceed the critical 1,700 mm (66.9 in) level in width. The series GE platform shared
3944-625: The Mazda MX-6 coupe, and the Autozam Clef , a total of five cars were spawned off the same platform, launched under four different brands in Japan over a two-year period. All of these models ended their production run prematurely, most likely due to the difficulties involved in promoting so many new nameplates as the Japanese economy began to feel the effects of the recession resulting from
4080-656: The Sohari Plant in Gwangmyeong , South Korea. Production originally commenced in 1973 in the form of the Brisa B-1000 pickup truck, but passenger car production (originally as the "Brisa S-1000") only commenced later. Brisa comes from the Spanish/Portuguese word for "breeze". The Brisa was equipped with a 62 PS (46 kW) 1.0-liter Mazda engine, a bigger 1.3-liter engine was later added to
4216-601: The Toyota Corolla , and the Nissan Sunny in North America. The Grand Familia/Savanna was intended to replace the smaller Familia. But with the advent of the 1970s energy crisis , the Familia began to experience an increase in sales due to better fuel economy, so the Familia remained in Japan and Europe, and Mazda decided to offer the Grand Familia and Savanna as larger, performance enhanced alternatives. It
Mazda Capella - Misplaced Pages Continue
4352-517: The "626 Cronos" in Canada, but dropped the Cronos for the 1996 model year. Mazda's 2.5-litre V6 engine debuted to rave reviews. Though the 626's manual transmission was highly regarded, U.S.-built four-cylinder 626s from 1994 onwards used the widely used Ford CD4E automatic transmission (designated by Mazda as LA4A-EL), which replaced the 1993 model's Japanese sourced transmission, which continued on in
4488-516: The "Familia Presto" in the domestic Japanese market), the slightly different OHC "PC" 1-liter engine was also offered. A larger 1169 cc straight-four engined version came along in February 1968, becoming the "Mazda 1200" for export. In this form, the car was first exhibited in Europe at the 1968 Paris Motor Show in the autumn of that year. Power outputs (SAE gross) in Japan of the facelifted, overhead-cam-engined versions were 62 and 75 PS (46 and 55 kW) respectively. The Van (wagon) model
4624-599: The "Mazda Vantrend" (station wagon and special limited order as high roof van or pickup truck) between 1993 and 1997. The Vantrend and its derivatives were also marketed as the Mazda M1400 . The name MR90 stands for "Mobil Rakyat 90" (people's car for the 1990s) as it was intended to become a national car project. This was scuppered by the appearance of the Timor 515 project. The MR90 and its successors did see limited exports to small markets such as Fiji and Sri Lanka. There
4760-402: The 1400) at the end of June 1978. When the next generation front-wheel-drive Familia/323/GLC models were released in 1980, the wagon and van models continued unchanged, due to Mazda not developing wagon models for the newer range. A facelift however was given to the wagons in 1981, which gave the models the front clip (albeit with different bumpers) of the front-wheel-drive models. Production of
4896-409: The 1986 model year. For the 1979 model year, the original 52 hp (39 kW) 1272 cc four was replaced with a 1415 cc engine producing 65 hp (48 kW). In addition to three- and five-door hatchbacks, as well as the wagon, there was also a GLC Sport version which offered a five-speed rather than the four-speed manual or the three-speed automatic installed in other versions. After
5032-461: The 1993–1997 version. One such quote from Edmunds described it as "a bland, bread-and-butter sedan that's not big enough for families and not sporty enough for enthusiasts." Along with a nearly invisible facelift, front side airbags were new options for 2000, as were larger wheels, four-wheel discs, and rear heat ducts. The four-cylinder engine was also upgraded by 5 hp (3.7 kW). Mid-size car Mid-size —also known as intermediate —is
5168-422: The 2.0-litre was available in the United States. The 626 was facelifted in November 1980, with the update bringing flush-fitting headlamps and a new grille insert. Other changes included redesigned tail-lights, a revised dash, new trim and improved dynamics. The grille was lengthened slightly to remove the body-coloured gap between the headlamps and grille on the original model. It was also reduced in height so that
5304-559: The 2.0-litre. Four-wheel drive was available with the larger engine only. Equipment levels were Li-S, Li, and Gi for the 1.8. The 2.0 was sold as the Zi or as the Fi when equipped with four-wheel drive. In August 1997, the Capella was replaced by the new GF model, which was the same as the 626 outside of North America. 1997 brought the sixth-generation Capella, now on the GF platform . The Mazda Cronos name
5440-440: The 323/Familia underwent a facelift, replacing the previous round headlights with rectangular units which were designed as a single unit along with the grille. The new style was in line with that of the recently released Mazda Capella/626 (CB) . Other minor differences occurred along with the facelift. The range was replaced in 1980, however, the station wagon models continued in production until 1986. The FA4-series Familia/323
5576-496: The 4WS system introduced by Honda on their 1988 Prelude . This system was only available in the five-door and the coupé. While not particularly successful in the marketplace, Japanese consumers could choose this option for longer than could export customers. All of the body styles also had optional ABS . The final facelift made a driver's side airbag an option for the buyer. The 626 line was facelifted for 1990, although mainstream Japanese production ended in 1991. Ford kept building
Mazda Capella - Misplaced Pages Continue
5712-586: The 626 and Telstar models were sold worldwide. Designed to compete against Japanese mid-size stalwarts such as the Honda Accord , Toyota Corona , and Nissan Bluebird , the Capella was succeeded by the Mazda6 (Atenza) in 2002. The car was named after Capella , the brightest star in the constellation Auriga , the sixth-brightest in the night sky and the third-brightest in the northern celestial hemisphere , after Arcturus and Vega . The first Capella
5848-576: The 626 as the Ford Telstar from 1983 (complete with slightly different styling and dashboard) in place of the European-sourced Sierra, although Ford New Zealand did offer the Sierra wagon (in both 1.6- and 2.0-litre versions) from May 1984 after the long best-selling Cortina estate car was discontinued, in lieu of the Mazda's lack of an equivalent model. Mazda New Zealand initially assembled 626 "short nose" 1.8-litre four-door sedan and
5984-528: The 626 offered 101 PS (74 kW) with a twin barrel carburetor. The Swiss market only received a 95 PS (70 kW) 2-litre version, with the lower power a result of different emissions standards. In addition to the commonly seen model, there was also a short-nosed version with smaller headlamps and a larger grille, which necessitated a different bonnet as well. This model was sold in Southeast Asia and Oceania and possibly other markets including
6120-493: The 626/Capella as built for the rest of the world. It was also considerably larger and heavier. LX and ES models were available, with both 2.0L and 2.5L V6 engines. Unusual amongst its competitors, the V6 was available with a manual transmission. From 1998 through 1999 the 626 was given an engine overhaul to give it better pedal feel. However, as most car reviews attested, it is a bland vehicle with softer handling and fewer features than
6256-482: The A-Spec full fitting fog lights, different interior cloth patterns, projector headlamps (glass lenses), a 1.8-litre FP engine, and a hatchback model. Europe also received a diesel-engined version, using the "Comprex" pressure-wave supercharged RF engine seen in the previous generation JDM Capella. Power in Europe is 75 PS (55 kW) ECE at 4000 rpm, while the Japanese model claims 82 PS (60 kW) JIS at
6392-556: The BPB55, BTA55/65, or FA2T55/65/66 model codes respectively when fitted with the OHV 1.0 or 1.2, or the OHC 1.3. FA2T55 was a short bed with 500 kg (1,100 lb) max load, 65 was a long bed with the same capacity, while the 66 upped that to 600 kg (1,300 lb). All three models were available as either Standard or Deluxe. The 1000 Van (Japanese terminology for the station wagon, which
6528-788: The CB series was launched in December 1978. It was available as a four-door sedan in three trim levels (Standard, Deluxe and Super Deluxe) and as a two-door Super Deluxe hardtop. The engine was the 2.0-litre 63 kW (84 hp) inline-four engine available with three transmissions (four-speed and five-speed manual or three-speed automatic). The Deluxe model added cloth-inserted seats, push button radio, bumper rubber inserts, rubber body side protection mouldings, intermittent wipers, chrome wheel rings, map reading lights, and seat back map pockets. The Super Deluxe added halogen headlamps, window tint, FM radio, bumper overriders, and electronic safety check panel. For
6664-611: The Capella RS was introduced—this lowered version with Rostyle wheels was limited to 20 cars per month. South African production of the Capella Rotary continued into 1979, since Sigma had taken the decision not to build the second-generation Capella there but to focus on the Colt Galant instead. The Mazda 616 was a major component of Mazda's United States expansion in 1971, having been preceded by its rotary brother,
6800-500: The Capella name returned to the G platform at this time. Available only with a four-door saloon bodywork, it received 1.8- or 2.0-litre inline-four engines . The slightly reduced width dimension of this series was due to the fact that the Japanese Government taxes exterior dimensions and engine displacement that exceed regulations . This factor is a key component in all vehicles sold in Japan, and this generation vehicle
6936-450: The Familia long after it was discontinued at home. Mazda's automotive plans for the early sixties consisted of growing alongside the Japanese economy. To achieve this goal, they began by building an extremely affordable kei car , the R360 in 1960, planning on introducing gradually larger and pricier cars as the Japanese customers became able to afford them. As a preview, testing the waters,
SECTION 50
#17327978688647072-406: The Familia on the Japanese market as well as the rotary models. In Japan, the installation of a rotary engine gave Japanese buyers a financial advantage when it came time to pay the annual road tax in that they bought a car that was more powerful than a traditional inline engine, but without having the penalty for having an engine in the higher 1.0-litre tax bracket. This was the only generation of
7208-528: The Familia that had the rotary engine offered. When Mazda updated the rotary engine to single distributor design in late 1973 with a raft of improvements to improve reliability and fuel economy, the smaller 10A engine was discontinued. Upgrading the Familia Rotary to the 12A engine would have cost the car its tax advantage in Japan, and the decision to discontinue it was made, despite the Familia body continuing production for some years to follow. The R100
7344-456: The KL-ZE engine mated with a 5-speed manual transmission. However, the 626 MPS was never realized as the next generation of the 626, with the Mazda 6 MPS being introduced instead. The North American market 626, introduced in 1997 for the 1998 model year was different from those sold in other countries. The Michigan-built 626 resembled its predecessor, lacking the aggression which could be seen in
7480-522: The Mazda 626 in nearly all export markets. European sales of the new 626 began in January 1992. The 626 was again Wheels magazine's Car of the Year for a second time in 1992. The European (E-spec) and Asian (JDM) models had many differences versus the North American (A-spec) models. These include: raised turn signal side markers vs the A-Spec flush mounted side markers, small fog lights with silver bezels vs
7616-542: The Mondeo replaced the Telstar in most markets though the latter was still sold in Japan. The Capella was lightly updated in 1999 with a new interior and exterior, cabin air filtration, an available turbo-diesel engine, a new Activematic manually operated automatic transmission , and available EBD and DSC . The Mazda 626 GLX is a European and Asian only trim level of the Mazda 626 not produced or sold in North America. It
7752-508: The RX-2, the previous year. It featured the 1.6-litre (1586 cc) engine, which was later used in the 808 . The American Capella was updated and renamed the next year: the 1972 Mazda 618 had a larger 1.8-litre (1796 cc) VB engine which was only used in the US and not related to the similarly sized "VC" used in the rest of the world. Lasting just one year, the 618 nameplate was not used again in
7888-425: The Series 2) it was known as the "Familia Presto Rotary" in Japan as the Presto nameplate was added into the entire Familia range. Power was rated at just 100 PS (74 kW) due to a small carburetor (thus the "R100" name). The rotary engined R100 has a unique front end design, with a more prominent pointed hood, grille, and bumper. The rear also gained its own design with twin round tail lights, which became for
8024-527: The Telstar GL). Only a 2.0-litre GLX was offered, with the 81 kW (110 PS; 109 hp) uncatalyzed 12-valve engine. For the fifth generation, GE series sedan and hatchback, the Capella name was dropped—although export markets retained the 626 title. In this generation, there was no station wagon version in this line-up. Its nameplate replacements, the Mazda Cronos (sedan) and ɛ̃fini MS-6 (hatchback) that launched in November 1991 were pitched to Japanese customers instead. Both were slightly narrower than
8160-403: The US Mazda model range. The base model now used Mazda's 110 hp (82 kW), 2.2-litre 3-valve SOHC F2 producing just 10 hp (7.5 kW) shy of the old turbocharged engine, and the new turbo was up to 145 hp (108 kW). The 1988 introduction of four-wheel steering to the 626 Turbo liftback, along with Honda's Prelude 4WS, marked the first 4WS systems for the US market. It
8296-436: The United States and the only federalized version of the Capella for 1973 was the RX-2. The second-generation rear-wheel drive Capella was available between October 1977 and 1982, in both sedan and coupé forms. It was known on export markets as the 626, with the exception of the United Kingdom, where the vehicle was called the Mazda Montrose , the name being changed to honor the local Mazda dealership in Montrose . The Montrose
SECTION 60
#17327978688648432-477: The V6 model. The CD4E was manufactured in Batavia, Ohio under ZF Batavia , a joint venture between Ford and ZF Friedrichshafen AG . In service in the Mazda 626, the transmission was reputed to have a higher failure rate than in other applications. It is widely known to transmission specialists that the CD4E overheats due to a poorly designed valve body and torque converter. Mazda issued relevant Technical Service Bulletins (0400502, 01598, 003/97K, 006/95) regarding
8568-421: The commercial versions based on the 1970 Familia could finally be retired. Three Mazda engines were available, the 985 cc PC , 1,272 cc TC , and the 1415 cc UC (introduced in March 1978). The 1.0-liter unit was only made for export markets. The new Familia shared many parts with the older Mazda Grand Familia. This was the first appearance of the 323 name, for export markets only. The Familia AP
8704-458: The economy sector with the Mizer in 1976, a rebadged 808/818. Engine (US): The pickup models were built until 1991 for markets such as South Africa, Zimbabwe, and the Philippines. In South Africa, the little bakkie was sold as the "Mazda F-1000" or "F-1300". In Thailand, a version of the pickup was produced in small numbers until the late 1990s as the Familia Super Cab and Maxi Cab. Engines (export power outputs, DIN): The pickup received
8840-472: The end of March 1979). All had twin-barrel carburettors and produced 90, 100, and 110 PS JIS (66, 74, or 81 kW). The higher equipped versions received the larger US bumpers and were thus somewhat longer overall. The Mazda 626 badge was used for the first time in some markets, replacing the earlier "616". The 626 was typically fitted with the 1.6- or 2.0-litre version of the Mazda F/MA , which produced from 75 to 90 PS (55 to 66 kW), though only
8976-521: The executive director of Indomobil Group) built around 50 units replica of Porsche 911 (964) based on MR90 hatchbacks. While retaining the original 1.4-liter engine, 5-speed manual gearbox, suspension and dashboard (later models has 964 dashboard replica), the body was made from fiberglass by using the 964 production tools from VW Group . At that time Indomobil had a trial by assembling two Porsche 964 and planned to build Porsche and Audi in Indonesia to compete with BMW and Mercedes-Benz . The plan
9112-401: The export 626 saloons and hatchbacks to meet Japanese tax restrictions. Built on the GE platform , the hatchback-only MS-6 was launched under the ɛ̃fini brand, as a separate car from the sedan-only Cronos, as Mazda was at the beginning of an ambitious five-brand expansion plan of doubling sales. Including the badge-engineered Ford Telstar (sold at Japanese Ford dealerships called Autorama),
9248-422: The facelift model from 1980 in Australia, the base "Standard" model was renamed "Special", while the sedan and hardtop Super Deluxe trims each received unique (to trim level and body variant) wheel trims. A rear folding armrest, central locking and sunroof were added to the Super Deluxe sedan. Another minor update in 1981 changed the wheel designs for the Super Deluxe. In September 1982, the third-generation Capella
9384-525: The full-size cars of a decade or so ago ... best sellers include Ford Torino , Chevrolet Chevelle , AMC Matador , Plymouth Satellite ..." The domestic manufacturers began changing the definition of "medium" as they developed new models for an evolving market place. A turning point occurred in the late 1970s, when rising fuel costs and government fuel economy regulations caused all car classes to shrink, and in many cases to blur. Automakers moved previously "full-size" nameplates to smaller platforms such as
9520-412: The grille and headlamps formed a single "band" across the front-end. In the United States, the facelift appeared for the 1981 model year and meant more black trim (including the bumpers) and a new grille and headlights. The engine also received new emissions equipment, consisting of two catalytic converters , an air pump, and an air control valve, which robbed the 2.0 four of some power. Also new for 1981
9656-412: The grille as well as more chrome trim. The Familia was sold in other markets as the 800. The Familia was introduced to the Japanese market in time for the 1964 Summer Olympics which began in October. The cars used a 782 cc, " SA " four-stroke aluminum straight-four engine , also known as the "white engine". There was also a pickup version available from November 1964, while a box truck (called
9792-410: The introduction of the front-wheel-drive GLC the carry-over station wagon's engine was replaced with the new E5 model of 1490 cc, although claimed power dropped somewhat, to 63 hp (47 kW). In South Africa, the five-door-only 323 proved an immediate success. The 1.3 was gradually replaced by the larger 1.4 from July 1978, while a Special and a CS model were added at the low and high ends of
9928-736: The larger Grand Familia -based Mazda Savannah. The piston-engined 1000/1300 and rotary-engined R100 coupés were also replaced by 808/818/RX-3 coupé for export market. This generation was not available in North America and replaced by the bigger 808/Mizer/RX-3. Developed to meet new stricter emissions standards in the domestic market, the Presto featured the 1272 cc TC engine or the by now familiar, pushrod 1.0-litre PB unit. Power outputs in Japan (JIS gross) are 62 PS (46 kW; 61 hp) and 87 PS (64 kW; 86 hp) respectively, 50 PS (37 kW; 49 hp) and 66 PS (49 kW; 65 hp) (DIN) for export markets. Production of
10064-424: The line got a new front clip with dual (rather than quad) headlights and an entirely new interior, and fuel injection on the base engine meant 93 hp (69 kW). A new four-speed automatic, some trim changes, and five new colours were introduced for 1987, the last model year of this series. The GC, locally assembled by Sigma, was released in South Africa in 1983. Due to a local content programme then in force,
10200-480: The line up. Production came to an end after the new military dictator Chun Doo-hwan enforced industry consolidation, meaning Kia had to give up passenger cars and focus entirely on light trucks. The original version of the Brisa received a slightly different front end from the original Familia, featuring twin headlights. Later, single headlights were used. In total, 31,017 Brisa passenger cars were built. Including
10336-449: The lineup respectively, complementing the existing De Luxe models. Well-equipped versions of the 1978 facelift model were sold as the "323 GLC" in South Africa. A 1600-cc model was also available in South Africa – however this model did not have a Mazda engine, unlike the rest of the range. To satisfy that country's local content regulations, a locally built Mitsubishi Saturn 1.6-liter unit was used. This produces 77 PS (57 kW) and
10472-540: The long nose and 2.0-litre engine. Ford's Telstar received similar changes. The new 2.0-litre FE engine was up to 83 hp (62 kW) for the North American market, where the car received larger bumpers and sealed-beam headlights as per federal regulations. A 626 GT (also called the Turbo in Canada) was introduced in 1986 using the 120 hp (89 kW) and 150 lb⋅ft (200 N⋅m) FET engine. The rest of
10608-421: The mandatory-for-Europe fog light lenses though the bulbs and wiring were not included. This and later generations would also be imported used from Japan in later years, greatly widening the choice of models and specifications available in this market. After the introduction of the next generation 626 (a rebadged Mazda Cronos), the station wagon continued to be assembled (alongside its slightly lower priced sister,
10744-522: The mid-size category. The automobile that defined this size in the United States was the Rambler Six that was introduced in 1956, although it was called a "compact" car at that time. Much smaller than any standard contemporary full-size cars, it was called a compact to distinguish it from the small imported cars that were being introduced into the marketplace. By the early 1960s, the car
10880-585: The mid-size market for decades. Mid-size cars were the most popular category of cars sold in the United States, with 27.4 percent during the first half of 2012, ahead of crossovers at 19 percent. The United States Environmental Protection Agency (EPA) Fuel Economy Regulations for 1977 and Later Model Year (dated July 1996) includes definitions for classes of automobiles. Based on the combined passenger and cargo volume, mid-size cars are defined as having an interior volume index of 110–119 cu ft (3.1–3.4 m ). Mazda Familia#1200 (USA) It
11016-414: The mid-size market segment as the line of cars themselves kept increasing in size. By 1965, these GM "A platform" mid-size models matched the size of 1955 full-size cars. During the 1970s, the intermediate class in the U.S. was generally defined as vehicles with wheelbases between 112 inches (2,845 mm) and 118 inches (2,997 mm). Once again, the cars grew and by 1974 they were "about as large as
11152-636: The naturally aspirated engine. By 1990, the 1.6 had been discontinued in most markets, although JDM models intended for commercial use still used the little B6 engine . The 626 was released in the US for the 1988 model year in 3 trims: DX, LX, and Turbo. Standard equipment included velour upholstery with front bucket seats, Mazda's Twin Trapezoidal Link independent rear suspension, and a fuel injected 2.2-litre SOHC 4-cylinder motor. The LX trim offered power door locks, mirrors and windows, cruise control, oscillating vents, and an upgraded sound system with
11288-476: The overall length increased, up to 3,970 mm (156 in) for the MR90 hatchback. Only the 70 PS (51 kW) UC 1.4-liter engine was offered, in combination with a five-speed transmission. The project was suggested to and given the green light by Mazda's Senior Managing Director Keiji Asano while he was on a trip to Indonesia in 1986. Sold alongside the seventh generation 323 , an MR90 cost less than half
11424-551: The penalty for having an engine in the higher 1.5-litre tax bracket. This was the only generation that had the rotary engine offered. The RX-2 was assembled under contract in New Zealand from 1972 for Mazda New Zealand by Motor Industries International in Otahuhu, South Auckland. It was the first and only rotary-engined car ever to be assembled in the country and was made as both a sedan, with manual or automatic transmission and
11560-471: The pickups increases the totals to 75,987, of which a total of 1,526 were exported. Exports, Kia's first, began with a shipment of 31 Brisa B-1000 pickups to Qatar in 1975. The Brisa (along with the pickup model, typically called "Master" in export) was also exported to Colombia and Greece. In September 1971, Mazda introduced the "Mazda Grand Familia" and the Mazda Savanna to better compete with
11696-491: The podium. This time, three of the Mazdas retired, with the fourth claiming the fifth position. Mazda also turned its attention to Le Mans in 1970 with rotary-powered prototypes. The company finally won that race 21 years later with the 787B . From October 1974 until 1981, Kia Motors manufactured a pick up variant of the second generation Familia as the "Kia Brisa" at their first integrated automobile manufacturing facility,
11832-482: The previous generation 1200 model in most markets. In Finland, the Familia Presto was marketed as the "Mazda Marella." The sedan and coupé were updated in 1972 in Japan and in the autumn of 1973 for export market, but the truck and wagon/van versions continued with little change. The vans and pickup trucks actually soldiered on until 1978, by which time a wagon version of the succeeding FA4 Familia (323/GLC) had been introduced. The later pickup versions were also available in
11968-465: The price of the newer model, but still more expensive than Toyota Kijang and Suzuki Carry "minibuses" as the country imposed 30% tax for sedans. In the past hatchback and wagon were classified as sedan Indonesia, but then revised as "minibus" in early 2000s. This changes boosting the sales of hatchbacks and started the downfall of sedans popularity in Indonesia. Around this time, a coachbuilder company called PT. Marvia Graha Motor (owned by Marvy Apandi,
12104-556: The production of private cars (a luxury in Japan at the time), the first Familia was initially only available as a commercial two-door wagon called the Familia van. The van was joined in April 1964 by a plusher Familia wagon, in October by a four-door sedan, and in November by a two-door sedan. The "flat deck" design of the sedan versions was reportedly inspired by the Chevrolet Corvair . Private car versions received foglights in
12240-471: The range received a light facelift including a chrome strip around the front grille. Unlike the truck, the vans also used the "Familia Presto" name. Chassis codes are SPCV for the 1.0-litre and STBV for the 1.3-litre, with power outputs as for the sedan/coupé. Standard and Deluxe versions were available, with the Deluxe also offering five-door bodywork. The Familia was exported as the "Mazda 1300", and replaced
12376-457: The relevant cells. Data is for models as marketed in the Japanese domestic market. The new Familia appeared in November 1967 with the same pushrod 987 cc engine as used in the previous generation sedans. It was sold as the "Mazda 1000" in some markets. In July 1968 the rotary-engined version (R100) was introduced, along with a new coupé bodywork which was also available with the 1200 cc piston engine. After an April 1970 facelift (called
12512-418: The rotary-engined models received round twin headlamps beginning in October 1971. From 1972 all models received the double headlamps. The taillight design was changed repeatedly over the production run. This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States. An optional Mazda Wankel engine
12648-512: The same Ford-Mazda joint venture Vehicle Assemblers of New Zealand (VANZ) factory in Wiri, South Auckland) had minor styling and equipment differences (the top Telstar hatchback had an electric sunroof) and anti-lock brakes were now standard on some models, for which factory engineers had to build a special test rig at the end of the assembly line. These were also the first 626/Telstar models to have factory fitted air conditioning, though only standard on
12784-415: The same engine speed. European models were also available in a model with four-wheel steering until a mid-1994 lineup adjustment. This was only offered in the hatchback with the 2.5-litre V6 and a manual transmission and not many were sold. For the first time for a Mazda, the 626 began manufacturing in the US at Flat Rock, Michigan on 1 September 1992 for the 1993 model year. The car was originally known as
12920-679: The same platform, like the AMC Matador sedan, had a combined passenger and cargo volume of 130 cubic feet (3.68 m ), and were now considered "full-size" automobiles. Cars that defined the mid-size market in the 1980s and 1990s included the Chrysler K-Cars ( Dodge Aries and Plymouth Reliant ), the Ford Taurus , and the Toyota Camry , which was upsized into the midsize class in 1991. The Taurus and Camry came to define
13056-525: The same width dimension as the luxury brand ɛ̃fini MS-8 and ɛ̃fini MS-6 , sharing the 2.5-litre V6. Moving in accord with early-1990s zeitgeist , Mazda considered width a key factor in the Cronos' sales failure, and proceeded to create a narrower stopgap model from the CG platform . This car was introduced in 1994 as the new CG series Capella sedan. Nonetheless, the GE Cronos and MS-6 continued to be sold as
13192-454: The second generation Familia ended in January 1977, but not before another minor facelift and emissions scrubbing had taken place in February 1976. This changes were not applied for export market. After this change, only the larger engine with lean-burn technology was available in the home market, now with 72 PS (53 kW; 71 hp) (JIS gross) and labelled Familia Presto 1300AP (for "Anti Pollution"). The Familia AP (323 in most of
13328-422: The sedan continued until November 1967, while the van versions continued until they were replaced in February 1968. Around 400,000 of the first Familias were built, 130,473 of which were sedans and coupés. Around 10,000 of the first generation Familias were exported, mainly to Australia and Oceania. Primary sources below are listed at the head of each column, information sourced elsewhere is referenced directly in
13464-488: The station wagon style was returned in the generation. Once again, the station wagon version used a slightly modified, carryover platform (now called GW , released in 1998). The wheelbase was 60 mm (2.4 in) longer than the sedan, and a V6 engine was offered. This time though, the bodywork was the same, minimizing confusion for buyers. By now, Ford had decided to reintroduce European models in Australasia so
13600-565: The success of the Cosmo Sports at Nürburgring in 1968, Mazda decided to race another rotary car. The Familia Rotary coupé won its first outing, at the Grand Prix of Singapore , in April 1969. Next, the company took on the touring car endurance challenge at Spa , the Spa 24 Hours . For 1969, Mazda entered a pair of Familia Rotary coupés. The cars came fifth and sixth the first year after
13736-524: The summer of 1978, aside from the 1.3 losing two horsepower along the way. In July 1968 Mazda added a Familia Rotary model to the range, offered in both two-door coupé and four-door sedan variants. Sedan models were given an additional "SS" nameplate. The Familia Rotary was powered by a 982 cc 10A Wankel rotary engine and the coupé version was sold outside Japan as the "Mazda R100". After an April 1970 update (known colloquially in Australia as
13872-483: The top Limited (626) and TX5 XRi (Telstar) five-door hatchbacks. Since 1991, the Capella label had only been used for the lingering GV series wagon and van as a result of Mazda's attempt at brand diversification. This changed when the new, more compact CG series Capella launched in August 1994. It was built on the CG platform designed for the upscale Mazda Lantis and Eunos 500 . This vehicle lasted only until 1997, and
14008-467: The transmission and torque converter. The CD4E was produced until 2008 at Batavia and was never officially recalled in any application. In 1994, a passenger side airbag was added, whilst some models of the 1994 and 1995 Mazda 626 2.0L automatics were outfitted with Ford's EEC-IV diagnostic system. In North America, the V6 spread to the LX trim in addition to the leather ES trim. New for 1996 and 1997 models were
14144-553: The wagons continued to 1986, when a new front-wheel-drive model was introduced. Originally available with the 1.3- TC and 1.4-liter UC engines, in export markets the larger unit was replaced with the new 1.5-liter E5 engine for the 1983 model year. For the United States, the GLC, advertised as the Great Little Car, was only offered with one engine at a time. The new GLC overlapped with the old-style Mizer for part of 1977 and
14280-512: The world received 1.6, 1.8, 2.0, and 2.2 (non-turbo) engines. The GT model had a 2.0-litre FE-DOHC engine that produced 148 (without a catalytic converter) or 140 PS (with a catalytic converter). Some models were available with a new 2.0 diesel RF-CX engine, notable for its use of a pressure wave supercharger (Comprex), that previously could be found in the Mazda Bongo commercial. Diesel models were also exported to Europe, usually with
14416-535: The world, GLC for "Great Little Car" in North America) debuted in January 1977 as a rear-wheel-drive subcompact, replacing both the Grand Familia (818) and the preceding Familia (1000/1300). There was a choice of hatchbacks and station wagon bodies, both available with a three- or five-door bodystyle. The station wagon version was a bit later, first being introduced in June 1978, which also meant that
14552-404: Was also a better equipped GLX version available. The Baby Boomers was a lightly facelifted variant with new bumpers and a rear spoiler, for a more sporty appearance overall. The 1990s versions built by Indomobil have modernized headlights (same as on the Mazda 626 (GC) , while Vantrend adopted the pre-facelift North American market quad headlights version) and bumpers. These alterations mean that
14688-651: Was also an estate model with either the 2.0-litre engine in GLX or GT trim, or the GLX Executive 4x4 2.2. The 2.0GT was also available in two-door coupe form. Most European markets received similar lineups, albeit with diesel options in many countries. The MX-6 was built in Michigan alongside its platform-mate, the Ford Probe at AutoAlliance International , while North American market 626s were still imported from Japan. 626 hatchbacks disappeared after 1991 from
14824-488: Was available in several body variants: Several of these were available in multiple trim levels. Engines: In Australia the 1.3 had 45 kW (61 PS; 60 hp) at 5700 rpm while the bigger 1.4, introduced in July 1978, offered 48 kW (65 PS; 64 hp) at a somewhat lower engine speed of 5500 rpm. The 1.4 was accompanied by the new, better-equipped CS model which was only available with five-door bodywork. Van engines: A five-speed manual gearbox
14960-467: Was available with either three or five doors, although most export markets only received the five-door version. From April 1970, the Presto nameplate was added into the entire Familia range, "Presto" means "quick" in Italian. Brand new overhead camshaft 1.3-liter TC engine also appeared, derived from the smaller 1.0-liter OHC engine already seen in the first generation Familia coupé. At the same time,
15096-488: Was available with two different 2.0 engines, a 115 PS engine was available from 1998 to 2002 in all models except for the GSI SE and Sport models, which have the 136 PS FS engine. In 2000, Mazda built the 626 MPS (Mazda Performance Series) concept sedan model. It debuted at the 2000 Geneva Motor Show as a concept car and only a few were ever produced. It would have included a new 2.5L 280 horsepower twin turbo redesign of
15232-576: Was carried out in September 1980 but this model was not sold in the UK, where the Montrose's styling remained unchanged. It was, however, offered in the rest of Europe and this and later generations were particularly popular in Germany. This Capella was designed with more concern for aerodynamics and achieved a Cx value of 0.38. The coupé and sedan were mechanically identical, with front MacPherson struts and
15368-592: Was equipped with the 1.6-litre B6 engine or the naturally aspirated diesel. When the new CG Capella was introduced in August 1994, the "Capella Cargo" received a facelift with a bigger grille and headlights and its name was changed to "Capella Wagon". The last addition to the Japanese lineup was a two-wheel-drive version of the 2.0 GT engine which arrived in June 1996. UK trim levels were LX (1.8-litre 8v), GLX (1.8-litre 8v /2.0-litre 12v), GLX Executive (2.0-litre 12v) and GT (2.0-litre 16v) GLX Executive 4x4 (2.2-litre 12v) Some early 2.0GT models had four-wheel steering. There
15504-425: Was intended for commercial use there) received either BPCV or BPBV chassis codes, signifying three- or five-door versions. The Familia Presto Van, with OHC engines, received chassis numbers MP3xV/SP3xV for the 1000 (3-door/5-door) and MT2xV/ST2xV for the 1200. The five-door Van range was gradually expanded downwards as the three-door models dropped in popularity. The Familia Presto Van continued largely unchanged until
15640-456: Was introduced in May 1970 and lasted until 1978, and was introduced as an intermediate alternative to the smaller Mazda Familia and the larger Mazda Luce . It was powered by four-cylinder SOHC valve engines displacing either 1.5 or 1.6 litres. Output is 92 or 100 PS (68 or 74 kW), respectively; and 144 N⋅m (106 lb⋅ft) of torque for the larger displacement version. The first models all had rectangular headlights, while
15776-400: Was introduced later as an alternative to the original four-speed manual gearbox. At the same time the original 7-inch (178 mm) round sealed beam headlights were replaced with square sealed beam units on all models except the van, together with a general styling and mechanical upgrade. A three-speed automatic gearbox was also available on the bigger engined models, it was first introduced (on
15912-500: Was introduced so as to encourage sales of the Capella against rival Japanese products. Another factor was that Japan was entering an economic recession due to the effects of the " bubble economy ", and all Japanese industries were experiencing a decline in manufactured products. The sporting models of previous Capellas were now sold under other nameplates, and the CG received 115 PS (85 kW) in 1.8 form and 125 PS (92 kW) in
16048-524: Was later also made available to the MX-6. In 1990, the 626 gained motorized seat belts for the US market only. Consumer response was strong. As for the previous generation, Colombian-built versions were the L (sedan), LX (liftback), and GLX (coupé). They entered local production in the first half of 1988. The L used the 1.8 with 90 PS while the LX and GLX received the 102 PS two-litre - both engines still carburetted, with automatic chokes. This generation
16184-763: Was marketed as the Familia in Japan, which means "family" in Latin. For export, earlier models were sold with nameplates including: "800", "1000", "1200", and "1300". In North America, the 1200 was replaced by the Mazda GLC , with newer models becoming "323" and "Protegé". In Europe, all Familias sold after 1977 were called "323". The Familia was also rebranded as the Ford Laser and Ford Meteor in Asia, Oceania, Southern Africa, some Latin American countries and, from 1991, as
16320-469: Was marketed to a new kind of youthful Japanese consumer, and sold very well at home as well as abroad. Nonetheless, the cars traditional rear-wheel-drive underpinnings limited interior space and betrayed themselves in having a very narrow track when compared to the body. The FA4 was somewhat of an interim solution while Mazda worked on a front-wheel-drive car, but still managed to sell around 890,000 examples in its three full years of production. In June 1979,
16456-471: Was offered and known as the Capella Rotary in Japan or the Mazda RX-2 for export. In addition to the 1.6, a Capella 1500 was added in October 1970. The Capella received a fairly thorough facelift in February 1974. This facelift included a restyled front end (lengthened by 110 mm) and a redesigned dashboard. This model received an optional 1.8-litre (1769 cc) engine for some markets and in Japan it
16592-523: Was offered as an alternative to the Ford Cortina , which was popular at the time. It was released in 1978, although the model's introduction to most markets was delayed until 1979. Early models had two slightly different frontal treatments. Models equipped with 1.6 or 1.8-litre engines came with a more pronounced sloping grille and models with the 2-litre engine came with a more flush grille. A bolder front and rear facelift, though similar in appearance,
16728-414: Was one of the first Mazda cars imported into the United States for the new Mazda Motors of America, sold in model years 1971 and 1972. Due to US regulations it was released in North America with round headlights fitted in place of the rectangular lights fitted in all other markets. It was a surprising hit with the American public, though sales were limited to some Northwestern states initially. Following on
16864-404: Was produced through 1980 before being replaced by the next-generation GLC. The marketing campaign in the U.S. had the words "Great Little Car" set to the tune of Spanish Flea . Thanks to the safety bumpers mandated by federal regulations, the 1979 base GLC three-door weighed in at 1,995 lb (905 kg) and was 154.3 in (3,920 mm) long. The station wagon continued to be offered until
17000-502: Was promoted and marketed as the "Widebody" in Japan. These changes were made only to the sedans and coupé, while the van/wagon and trucks remained in production and retaining the original narrower bodywork with minor changes. The Familia Presto continued using the "Mazda 1000/1300" name in most export markets, "Mazda Marella" name was also retained in Finland. The Rotary Presto sedan/coupé was discontinued in Japan, having been replaced by
17136-512: Was released using the new front-wheel-drive Mazda GC platform . As before, the international version was named the 626 , with this version being named Import Car of the Year by Motor Trend magazine, the Car of the Year Japan award in 1982, and Car of the Year by Wheels magazine for 1983. It came in fifth in the 1984 European Car of the Year , the highest finish up to that date for
17272-513: Was renamed the Rambler Classic and while it retained its basic dimensions, it was now competing with an array of new "intermediate" models from General Motors, Ford, and Chrysler. The introduction of the 1962 Ford Fairlane was viewed by consumers as too close to the compact Falcon in size and performance as well as too close to the full-sized Ford models in price. It was the introduction of General Motors " senior compacts " that grew
17408-499: Was retired and the Capella, 626, and Telstar once again shared a common platform. All-wheel drive was optional in Japan. The hatchback, a popular variant in Australasia and Europe, was not sold in Japan. North American 626's were again built by AutoAlliance International in Flat Rock, Michigan , and had an entirely different body and differing engine options from 626's sold in the rest of the world. Beside sedan and hatchback styles,
17544-539: Was similar, including the wagon and imported rear-wheel steering models (TBC, 4WS was never on the Telstar), but without the coupe. The wagon's arrival enabled Ford to drop the UK-sourced Sierra wagon from local assembly, simplifying model sourcing. The NZ-specification cars, though imported CKD, shared much of their specifications with uncatalyzed European models including the modified tail lamp assemblies with
17680-519: Was sold as the "Capella CG" (for City Gear ) and the coupé as the "Capella C" ( Composite Coupé ). There was also a four-door hardtop sedan with unique bodywork, sold only in Japan, called the Mazda Persona . The station wagon version, intended as a true load carrier, was introduced in the northern-hemisphere spring of 1988 on a slightly modified platform (called the GV ). The station wagon also had
17816-457: Was sold with the "AP" suffix, for "Anti-Pollution". The 1500 was no longer available. The facelift rotary version received the CB12S chassis code rather than S122A. In Japan, the installation of a rotary engine gave Japanese buyers a financial advantage when it came time to pay the annual road tax in that they bought a car that was more powerful than a traditional inline engine, but without having
17952-408: Was terminated because the production quality was below VW Group's standard. The fourth generation Familia (BD), first shown on 2 June 1980, was entirely new – it was Mazda's first front-engine, front-wheel-drive subcompact car , and was available as a hatchback and sedan. It was developed with input from Ford , which in 1979 had acquired a stake in the Japanese manufacturer, and had a twin called
18088-488: Was the "Luxury" model, which featured ample equipment. The entire range received softer suspension settings for increased comfort, but these were tightened up again during the 1982 model year. Sedans of this generation were also assembled in New Zealand in three versions – four-speed manual base, three-speed automatic mid range and five-speed manual "Limited." Facelift models were much the same but some had velour upholstery and tinted glass. In 1982, Mazda New Zealand offered
18224-425: Was the first piston-powered Familia sold in the United States and arrived in two- and four-door forms alongside its rotary Mazda R100 coupé counterpart. It was replaced by the somewhat larger 808 (Grand Familia) the next year. The 1200 model returned for 1973 as the base-model economy Mazda. The company then focused on performance for the next two years, dropping the economy car. After the gas crisis they returned to
18360-503: Was the most powerful engine to be installed in the FA-series Familia/323. It arrived in early 1979, but period testers felt that the less-revvy 1.6 provided very little that the 1.4 did not offer, and could not be considered to be worth the price. Fuel consumption dropped, while top speed of 148 km/h (92 mph) was only marginally higher than the 145 km/h (90 mph) of the smaller version. Sigma also fielded
18496-482: Was the only model left with the 1.8 engine as the LX (hatchback) was now a 2-litre, closer to the coupé in its specifications. The GC-series continued to be available until the beginning of 1988, when the next generation 626 replaced it. The fourth-generation Capella was released in May 1987. It used the updated GD platform and some versions remained in production in Japan until 1996. Engines were new, though they still emphasized torque rather than outright power. Most of
#863136