Misplaced Pages

#34965

64-538: The LGV Rhin-Rhône (French: Ligne à Grande Vitesse ; English: high-speed line) is a French high-speed rail line, the first in France to be presented as an inter-regional route rather than a link from the provinces to Paris, though it actually is used by some trains to/from Paris. The first phase of the eastern branch opened on 11 December 2011. Construction of its second phase was initially expected to start in 2014 but still has no funding. If completed, LGV Rhin-Rhône would have three branches: The construction of

128-408: A carbody design that would reduce wind resistance at high speeds. A long series of tests was carried. In 1905, St. Louis Car Company built a railcar for the traction magnate Henry E. Huntington , capable of speeds approaching 160 km/h (100 mph). Once it ran 32 km (20 mi) between Los Angeles and Long Beach in 15 minutes, an average speed of 130 km/h (80 mph). However, it

192-578: A high-speed railway network in Russian gauge . There are no narrow gauge high-speed railways. Countries whose legacy network is entirely or mostly of a different gauge than 1435mm – including Japan and Spain – have however often opted to build their high speed lines to standard gauge instead of the legacy railway gauge. High-speed rail is the fastest and most efficient ground-based method of commercial transportation. However, due to requirements for large track curves, gentle gradients and grade separated track

256-546: A new top speed for a regular service, with a top speed of 160 km/h (99 mph). This train was a streamlined multi-powered unit, albeit diesel, and used Jakobs bogies . Following the success of the Hamburg line, the steam-powered Henschel-Wegmann Train was developed and introduced in June 1936 for service from Berlin to Dresden , with a regular top speed of 160 km/h (99 mph). Incidentally no train service since

320-616: A railway signaling works company and Kanopée SAS, a consulting firm in the hotel, tourism & leisure industries. In 2021, Egis acquired two companies in United Kingdom: CPMS TOPCO and its operational arm, Collaborative Project Management Services Limited to become a key player in the U.K. rail and infrastructure market and Galson Sciences Ltd, an international consulting and research firm based in Oakham and specializing in radioactive waste management and disposal. In

384-555: A some other interurban rail cars reached about 145 km/h (90 mph) in commercial traffic. The Red Devils weighed only 22 tons though they could seat 44 passengers. Extensive wind tunnel research – the first in the railway industry – was done before J. G. Brill in 1931 built the Bullet cars for Philadelphia and Western Railroad (P&W). They were capable of running at 148 km/h (92 mph). Some of them were almost 60 years in service. P&W's Norristown High Speed Line

448-569: A world record for narrow gauge trains at 145 km/h (90 mph), giving the Odakyu engineers confidence they could safely and reliably build even faster trains at standard gauge. Conventional Japanese railways up until that point had largely been built in the 1,067 mm ( 3 ft 6 in ) Cape gauge , however widening the tracks to standard gauge ( 1,435 mm ( 4 ft  8 + 1 ⁄ 2  in )) would make very high-speed rail much simpler due to improved stability of

512-476: Is a set of unique features, not merely a train travelling above a particular speed. Many conventionally hauled trains are able to reach 200 km/h (124 mph) in commercial service but are not considered to be high-speed trains. These include the French SNCF Intercités and German DB IC . The criterion of 200 km/h (124 mph) is selected for several reasons; above this speed,

576-584: Is no single standard that applies worldwide, lines built to handle speeds above 250 km/h (155 mph) or upgraded lines in excess of 200 km/h (125 mph) are widely considered to be high-speed. The first high-speed rail system, the Tōkaidō Shinkansen , began operations in Honshu , Japan, in 1964. Due to the streamlined spitzer -shaped nose cone of the trains , the system also became known by its English nickname bullet train . Japan's example

640-672: Is projected that 12 million passengers per year will use the LGV Rhine-Rhône service. The western branch consists of the crossing of Dijon, where a new station is to be built, the connection to the Paris-Marseille line near Montbard and the connection with the LGV Sud-Est at the Pasilly-Aisy junction. This branch will speed up connections with the Île-de-France region. In 2009, the regional planning procedure for

704-539: Is still in use, almost 110 years after P&W in 1907 opened their double-track Upper Darby–Strafford line without a single grade crossing with roads or other railways. The entire line was governed by an absolute block signal system. On 15 May 1933, the Deutsche Reichsbahn-Gesellschaft company introduced the diesel-powered " Fliegender Hamburger " in regular service between Hamburg and Berlin (286 km or 178 mi), thereby achieving

SECTION 10

#1732772131035

768-619: The Chicago-New York Electric Air Line Railroad project to reduce the running time between the two big cities to ten hours by using electric 160 km/h (99 mph) locomotives. After seven years of effort, however, less than 50 km (31 mi) of arrow-straight track was finished. A part of the line is still used as one of the last interurbans in the US. In the US, some of the interurbans (i.e. trams or streetcars which run from city to city) of

832-553: The 0 Series Shinkansen , built by Kawasaki Heavy Industries  – in English often called "Bullet Trains", after the original Japanese name Dangan Ressha ( 弾丸列車 )  – outclassed the earlier fast trains in commercial service. They traversed the 515 km (320 mi) distance in 3 hours 10 minutes, reaching a top speed of 210 km/h (130 mph) and sustaining an average speed of 162.8 km/h (101.2 mph) with stops at Nagoya and Kyoto. Speed

896-681: The Aérotrain , a French hovercraft monorail train prototype, reached 200 km/h (120 mph) within days of operation. After the successful introduction of the Japanese Shinkansen in 1964, at 210 km/h (130 mph), the German demonstrations up to 200 km/h (120 mph) in 1965, and the proof-of-concept jet-powered Aérotrain , SNCF ran its fastest trains at 160 km/h (99 mph). In 1966, French Infrastructure Minister Edgard Pisani consulted engineers and gave

960-590: The Marienfelde – Zossen line during 1902 and 1903 (see Experimental three-phase railcar ). On 23 October 1903, the S&;H-equipped railcar achieved a speed of 206.7 km/h (128.4 mph) and on 27 October the AEG-equipped railcar achieved 210.2 km/h (130.6 mph). These trains demonstrated the feasibility of electric high-speed rail; however, regularly scheduled electric high-speed rail travel

1024-647: The Morning Hiawatha service, hauled at 160 km/h (99 mph) by steam locomotives. In 1939, the largest railroad of the world, the Pennsylvania Railroad introduced a duplex steam engine Class S1 , which was designed to be capable of hauling 1200 tons passenger trains at 161 km/h (100 mph). The S1 engine was assigned to power the popular all-coach overnight premier train the Trail Blazer between New York and Chicago since

1088-545: The Prussian state railway joined with ten electrical and engineering firms and electrified 72 km (45 mi) of military owned railway between Marienfelde and Zossen . The line used three-phase current at 10 kilovolts and 45 Hz . The Van der Zypen & Charlier company of Deutz, Cologne built two railcars, one fitted with electrical equipment from Siemens-Halske , the second with equipment from Allgemeine Elektrizitäts-Gesellschaft (AEG), that were tested on

1152-807: The West Bank , including East Jerusalem , as well as in the occupied Golan Heights . The Egis Group was listed on the database on account of the activities of its subsidy Egis Rail Israel in Israeli settlements in these occupied territories, which are considered illegal under international law . During early 2024, Egis Eau S.A.S. and Egis International S.A.S. were sanctioned by the Inter-American Development Bank (IDB) for three years in connection with allegations of fraudulent and corrupt practices. In consequence, both Egis Eau S.A.S. and Egis International S.A.S. are to be included in

1216-474: The World Bank , whilst supporting the project, considered the design of the equipment as unproven for that speed, and set the maximum speed to 210 km/h (130 mph). After initial feasibility tests, the plan was fast-tracked and construction of the first section of the line started on 20 April 1959. In 1963, on the new track, test runs hit a top speed of 256 km/h (159 mph). Five years after

1280-447: The 150 km (93 mi) long south branch was launched. Seven routes have been put up for discussion by the developer Réseau ferré de France , who favours a route parallel to the A 39 motorway , at an estimated cost of €3 billion. The first phase of the eastern branch runs 140 km (87 mi) of the 190 km (120 mi) planned length, connecting Villers-les-Pots (east of Dijon ) to Petit-Croix (southeast of Belfort ),

1344-642: The French National Railway started to receive their new powerful CC 7100 electric locomotives, and began to study and evaluate running at higher speeds. In 1954, the CC 7121 hauling a full train achieved a record 243 km/h (151 mph) during a test on standard track. The next year, two specially tuned electric locomotives, the CC 7107 and the prototype BB 9004, broke previous speed records, reaching respectively 320 km/h (200 mph) and 331 km/h (206 mph), again on standard track. For

SECTION 20

#1732772131035

1408-565: The French National Railways twelve months to raise speeds to 200 km/h (120 mph). The classic line Paris– Toulouse was chosen, and fitted, to support 200 km/h (120 mph) rather than 140 km/h (87 mph). Some improvements were set, notably the signals system, development of on board "in-cab" signalling system, and curve revision. The next year, in May 1967, a regular service at 200 km/h (120 mph)

1472-497: The Middle East, Egis completed the acquisition of Projacs International, a local engineering consultancy and project management company, by increasing its ownership stake in the firm to 95.45%. In Australia, Australian strategic advisory, project delivery and technical services consultancy Indec joined Egis. In France, Egis acquired MT3, a consulting and engineering company in mobility and related applications, and 3 companies in

1536-531: The Middle East, Waagner Biro Bridge Services International, an infrastructure engineering, operation and maintenance company, WME, a multi-disciplinary engineering consultancies and U+A, a multi disciplinary architectural consultancy. In Europe: Weston Williamson + Partners (United Kingdom), an international architecture and urban design firm; AG Concept (France), an engineering firm specialized in cleanrooms; NordSignal (France), specializing in railway signaling; Nebu Transport Services (Netherlands), specialized in

1600-786: The Transportation sector. Overall, Egis is ranked 21st within the top Global Design Firms. During early 2018, Egis Group acquired Carillion ’s 30-year contract to operate and maintained the M40 motorway . In January 2022, Tikehau Capital acquired 40% stake in Egis from the former majority shareholder Caisse des Dépôts, an investment arm of the French state. In 2019, Egis purchased the Hong Kong-based engineering firm Inhabit. In 2020, two French companies joined Egis: Est Signalization

1664-606: The US, 160 km/h (99 mph) in Germany and 125 mph (201 km/h) in Britain. Above those speeds positive train control or the European Train Control System becomes necessary or legally mandatory. National domestic standards may vary from the international ones. Railways were the first form of rapid land transportation and had an effective monopoly on long-distance passenger traffic until

1728-579: The beginning of the construction work, in October 1964, just in time for the Olympic Games , the first modern high-speed rail, the Tōkaidō Shinkansen , was opened between the two cities; a 510 km (320 mi) line between Tokyo and Ōsaka. As a result of its speeds, the Shinkansen earned international publicity and praise, and it was dubbed the "bullet train." The first Shinkansen trains,

1792-496: The building sector: Openergy (digitization of energy performance), Kern (organization and operation management) as well as AD Ingé and AD Conseil (asbestos removal, deconstruction & circular economy ). In Asia, Egis acquired Sunland (Hong Kong), a consulting and building engineering company with 130 employees. In 2022, Egis acquired several companies. In the US, SB Architects, the architecture and design practice specialising in creating international hospitality destinations. In

1856-443: The cancelation of this express train in 1939 has traveled between the two cities in a faster time as of 2018 . In August 2019, the travel time between Dresden-Neustadt and Berlin-Südkreuz was 102 minutes. See Berlin–Dresden railway . Further development allowed the usage of these "Fliegenden Züge" (flying trains) on a rail network across Germany. The "Diesel-Schnelltriebwagen-Netz" (diesel high-speed-vehicle network) had been in

1920-562: The construction of high-speed rail is more costly than conventional rail and therefore does not always present an economical advantage over conventional speed rail. Multiple definitions for high-speed rail are in use worldwide. The European Union Directive 96/48/EC, Annex 1 (see also Trans-European high-speed rail network ) defines high-speed rail in terms of: The International Union of Railways (UIC) identifies three categories of high-speed rail: A third definition of high-speed and very high-speed rail requires simultaneous fulfilment of

1984-464: The curve radius should be quadrupled; the same was true for the acceleration and braking distances. In 1891 engineer Károly Zipernowsky proposed a high-speed line from Vienna to Budapest for electric railcars at 250 km/h (160 mph). In 1893 Wellington Adams proposed an air-line from Chicago to St. Louis of 252 miles (406 km), at a speed of only 160 km/h (99 mph). Alexander C. Miller had greater ambitions. In 1906, he launched

LGV Rhin-Rhône - Misplaced Pages Continue

2048-603: The deputy director Marcel Tessier at the DETE ( SNCF Electric traction study department). JNR engineers returned to Japan with a number of ideas and technologies they would use on their future trains, including alternating current for rail traction, and international standard gauge. In 1957, the engineers at the private Odakyu Electric Railway in Greater Tokyo Area launched the Odakyu 3000 series SE EMU. This EMU set

2112-508: The development of the motor car and airliners in the early-mid 20th century. Speed had always been an important factor for railroads and they constantly tried to achieve higher speeds and decrease journey times. Rail transportation in the late 19th century was not much slower than non-high-speed trains today, and many railroads regularly operated relatively fast express trains which averaged speeds of around 100 km/h (62 mph). High-speed rail development began in Germany in 1899 when

2176-595: The early 20th century were very high-speed for their time (also Europe had and still does have some interurbans). Several high-speed rail technologies have their origin in the interurban field. In 1903 – 30 years before the conventional railways started to streamline their trains – the officials of the Louisiana Purchase Exposition organised the Electric Railway Test Commission to conduct a series of tests to develop

2240-533: The first phase of the eastern branch was signed on 28 February 2006. The estimated cost of the first section of the eastern branch is 2.312 billion euros, shared between many organisations. The largest contributors of funds are the Government of France (€751 million), the maintainer of the French rail network RFF (€642 million) and the European Union (€200 million). Significant funding also came from

2304-438: The first time, 300 km/h (185 mph) was surpassed, allowing the idea of higher-speed services to be developed and further engineering studies commenced. Especially, during the 1955 records, a dangerous hunting oscillation , the swaying of the bogies which leads to dynamic instability and potential derailment was discovered. This problem was solved by yaw dampers which enabled safe running at high speeds today. Research

2368-575: The following two conditions: The UIC prefers to use "definitions" (plural) because they consider that there is no single standard definition of high-speed rail, nor even standard usage of the terms ("high speed", or "very high speed"). They make use of the European EC Directive 96/48, stating that high speed is a combination of all the elements which constitute the system: infrastructure, rolling stock and operating conditions. The International Union of Railways states that high-speed rail

2432-414: The impacts of geometric defects are intensified, track adhesion is decreased, aerodynamic resistance is greatly increased, pressure fluctuations within tunnels cause passenger discomfort, and it becomes difficult for drivers to identify trackside signalling. Standard signaling equipment is often limited to speeds below 200 km/h (124 mph), with the traditional limits of 127 km/h (79 mph) in

2496-461: The initial ones despite greater speeds). After decades of research and successful testing on a 43 km (27 mi) test track, in 2014 JR Central began constructing a Maglev Shinkansen line, which is known as the Chūō Shinkansen . These Maglev trains still have the traditional underlying tracks and the cars have wheels. This serves a practical purpose at stations and a safety purpose out on

2560-542: The late 1940s and it consistently reached 161 km/h (100 mph) in its service life. These were the last "high-speed" trains to use steam power. In 1936, the Twin Cities Zephyr entered service, from Chicago to Minneapolis, with an average speed of 101 km/h (63 mph). Many of these streamliners posted travel times comparable to or even better than their modern Amtrak successors, which are limited to 127 km/h (79 mph) top speed on most of

2624-628: The latter two branches and of the second phase of the Eastern branch is currently unfunded. Running north–south, the Southern branch line would help connect Germany, the north of Switzerland, and eastern France on the one hand with the valleys of the Saône , Rhône , the Mediterranean arc and finally Catalonia on the other. The east–west Eastern and Western branches lines would help connect on

LGV Rhin-Rhône - Misplaced Pages Continue

2688-492: The line. The construction of the Eastern branch was divided into two sections : Upon completion of the first section of the eastern branch, best journey time are: High-speed rail High-speed rail ( HSR ) is a type of rail transport network utilizing trains that run significantly faster than those of traditional rail, using an integrated system of specialized rolling stock and dedicated tracks . While there

2752-432: The lines in the event of a power failure. However, in normal operation, the wheels are raised up into the car as the train reaches certain speeds where the magnetic levitation effect takes over. It will link Tokyo and Osaka by 2037, with the section from Tokyo to Nagoya expected to be operational by 2027. Maximum speed is anticipated at 505 km/h (314 mph). The first generation train can be ridden by tourists visiting

2816-505: The network. The German high-speed service was followed in Italy in 1938 with an electric-multiple-unit ETR 200 , designed for 200 km/h (120 mph), between Bologna and Naples. It too reached 160 km/h (99 mph) in commercial service, and achieved a world mean speed record of 203 km/h (126 mph) between Florence and Milan in 1938. In Great Britain in the same year, the streamlined steam locomotive Mallard achieved

2880-469: The official world speed record for steam locomotives at 202.58 km/h (125.88 mph). The external combustion engines and boilers on steam locomotives were large, heavy and time and labor-intensive to maintain, and the days of steam for high speed were numbered. In 1945, a Spanish engineer, Alejandro Goicoechea , developed a streamlined, articulated train that was able to run on existing tracks at higher speeds than contemporary passenger trains. This

2944-513: The one hand London, Brussels , Lille and Île-de-France (i.e., Paris and surroundings) with Burgundy , Franche-Comté , south Alsace , southern Baden , and Switzerland on the other. A connection will be built at Perrigny, south of Dijon, to serve TGV and freight trains. Besançon Franche-Comté TGV station, located in Les Auxons will be connected to Besançon-Viotte station by a railway line which could be also used for commuter trains. It

3008-608: The planning since 1934 but it never reached its envisaged size. All high-speed service stopped in August 1939 shortly before the outbreak of World War II . On 26 May 1934, one year after Fliegender Hamburger introduction, the Burlington Railroad set an average speed record on long distance with their new streamlined train, the Zephyr , at 124 km/h (77 mph) with peaks at 185 km/h (115 mph). The Zephyr

3072-725: The recovery of VAT and excise duties in the Benelux. In Latin America: Payc (Colombia), the engineering leader in Colombian building sector. In December 2022, Egis has started the acquisition process for two companies: New Zealand’s Calibre Professional Services and the Middle Eastern arm of design practice U+A. On 12 February 2020, the United Nations published a database of companies doing business related in

3136-535: The test track. China is developing two separate high-speed maglev systems. In Europe, high-speed rail began during the International Transport Fair in Munich in June 1965, when Dr Öpfering, the director of Deutsche Bundesbahn (German Federal Railways), performed 347 demonstrations at 200 km/h (120 mph) between Munich and Augsburg by DB Class 103 hauled trains. The same year

3200-658: The three regions of France that the line travels through: Franche-Comté (€316 million), Alsace (€206 million) and Burgundy (€131 million). A further €66 million was funded by the Government of Switzerland. Preparatory works began in 2005, and construction officially started on 3 July 2006 with a ceremony in Les Magny , Haute-Saône . Actual construction of the first section started north of Besançon on 7 August 2006. Réseau Ferré de France appointed French engineering and consulting companies Setec and Egis to build

3264-540: The wider rail gauge, and thus standard gauge was adopted for high-speed service. With the sole exceptions of Russia, Finland, and Uzbekistan all high-speed rail lines in the world are still standard gauge, even in countries where the preferred gauge for legacy lines is different. The new service, named Shinkansen (meaning new main line ) would provide a new alignment, 25% wider standard gauge utilising continuously welded rails between Tokyo and Osaka with new rolling stock, designed for 250 km/h (160 mph). However,

SECTION 50

#1732772131035

3328-629: The world's population, without a single train passenger fatality. (Suicides, passengers falling off the platforms, and industrial accidents have resulted in fatalities.) Since their introduction, Japan's Shinkansen systems have been undergoing constant improvement, not only increasing line speeds. Over a dozen train models have been produced, addressing diverse issues such as tunnel boom noise, vibration, aerodynamic drag , lines with lower patronage ("Mini shinkansen"), earthquake and typhoon safety, braking distance , problems due to snow, and energy consumption (newer trains are twice as energy-efficient as

3392-962: The world's total. In addition to these, many other countries have developed high-speed rail infrastructure to connect major cities, including: Austria , Belgium , Denmark , Finland , Greece , Indonesia , Morocco , the Netherlands , Norway , Poland , Portugal , Russia , Saudi Arabia , Serbia , South Korea , Sweden , Switzerland , Taiwan , Turkey , the United Kingdom , the United States , and Uzbekistan . Only in continental Europe and Asia does high-speed rail cross international borders. High-speed trains mostly operate on standard gauge tracks of continuously welded rail on grade-separated rights of way with large radii . However, certain regions with wider legacy railways , including Russia and Uzbekistan, have sought to develop

3456-470: Was achieved by providing the locomotive and cars with a unique axle system that used one axle set per car end, connected by a Y-bar coupler. Amongst other advantages, the centre of mass was only half as high as usual. This system became famous under the name of Talgo ( Tren Articulado Ligero Goicoechea Oriol ), and for half a century was the main Spanish provider of high-speed trains. In the early 1950s,

3520-530: Was also made about "current harnessing" at high-speed by the pantographs, which was solved 20 years later by the Zébulon TGV 's prototype. With some 45 million people living in the densely populated Tokyo– Osaka corridor, congestion on road and rail became a serious problem after World War II , and the Japanese government began thinking about ways to transport people in and between cities. Because Japan

3584-403: Was extended a further 161 km (100 mi), and further construction has resulted in the network expanding to 2,951 km (1,834 mi) of high speed lines as of 2024, with a further 211 km (131 mi) of extensions currently under construction and due to open in 2031. The cumulative patronage on the entire system since 1964 is over 10 billion, the equivalent of approximately 140% of

3648-535: Was followed by several European countries, initially in Italy with the Direttissima line, followed shortly thereafter by France , Germany , and Spain . Today, much of Europe has an extensive network with numerous international connections. More recent construction since the 21st century has led to China taking a leading role in high-speed rail. As of 2023 , China's HSR network accounted for over two-thirds of

3712-523: Was inaugurated by the TEE Le Capitole between Paris and Toulouse , with specially adapted SNCF Class BB 9200 locomotives hauling classic UIC cars, and a full red livery. It averaged 119 km/h (74 mph) over the 713 km (443 mi). Egis Group In the global Engineering News-Record (ENR) ranking, Egis is given the 1st position in France and the 8th position globally in

3776-543: Was made of stainless steel and, like the Fliegender Hamburger, was diesel powered, articulated with Jacobs bogies , and could reach 160 km/h (99 mph) as commercial speed. The new service was inaugurated 11 November 1934, traveling between Kansas City and Lincoln , but at a lower speed than the record, on average speed 74 km/h (46 mph). In 1935, the Milwaukee Road introduced

3840-407: Was not only a part of the Shinkansen revolution: the Shinkansen offered high-speed rail travel to the masses. The first Bullet trains had 12 cars and later versions had up to 16, and double-deck trains further increased the capacity. After three years, more than 100 million passengers had used the trains, and the milestone of the first one billion passengers was reached in 1976. In 1972, the line

3904-492: Was officially opened by President Nicolas Sarkozy on 8 September 2011, with passenger services starting on 11 December 2011. The eastern branch is used by TGV trains operated by SNCF . It will become a key link in both the north–south and east–west transport corridors. The line carries regional, national, and intra-European traffic. Mulhouse provides connection to Basel , Switzerland, and then to southwestern Germany and north-western Switzerland. The financing agreement for

SECTION 60

#1732772131035

3968-472: Was resource limited and did not want to import petroleum for security reasons, energy-efficient high-speed rail was an attractive potential solution. Japanese National Railways (JNR) engineers began to study the development of a high-speed regular mass transit service. In 1955, they were present at the Lille 's Electrotechnology Congress in France, and during a 6-month visit, the head engineer of JNR accompanied

4032-402: Was still more than 30 years away. After the breakthrough of electric railroads, it was clearly the infrastructure – especially the cost of it – which hampered the introduction of high-speed rail. Several disasters happened – derailments, head-on collisions on single-track lines, collisions with road traffic at grade crossings, etc. The physical laws were well-known, i.e. if the speed was doubled,

4096-477: Was too heavy for much of the tracks, so Cincinnati Car Company , J. G. Brill and others pioneered lightweight constructions, use of aluminium alloys, and low-level bogies which could operate smoothly at extremely high speeds on rough interurban tracks. Westinghouse and General Electric designed motors compact enough to be mounted on the bogies. From 1930 on, the Red Devils from Cincinnati Car Company and

#34965