Misplaced Pages

#825174

138-451: The Toronto Suburban Railway was a Canadian electric railway operator with local routes in west Toronto , and a radial ( interurban ) route to Guelph . The Weston, High Park and Toronto Street Railway Company was incorporated in 1890, and changed its name to the City and Suburban Electric Railway Company the next year. The Davenport Street Railway Company was incorporated in 1891. In 1894,

276-408: A crank on a driving axle. Steam locomotives have been phased out in most parts of the world for economical and safety reasons, although many are preserved in working order by heritage railways . Electric locomotives draw power from a stationary source via an overhead wire or third rail . Some also or instead use a battery . In locomotives that are powered by high-voltage alternating current ,

414-586: A dining car . Some lines also provide over-night services with sleeping cars . Some long-haul trains have been given a specific name . Regional trains are medium distance trains that connect cities with outlying, surrounding areas, or provide a regional service, making more stops and having lower speeds. Commuter trains serve suburbs of urban areas, providing a daily commuting service. Airport rail links provide quick access from city centres to airports . High-speed rail are special inter-city trains that operate at much higher speeds than conventional railways,

552-731: A fourth rail system in 1890 on the City and South London Railway , now part of the London Underground Northern line . This was the first major railway to use electric traction . The world's first deep-level electric railway, it runs from the City of London , under the River Thames , to Stockwell in south London. The first practical AC electric locomotive was designed by Charles Brown , then working for Oerlikon , Zürich. In 1891, Brown had demonstrated long-distance power transmission, using three-phase AC , between

690-542: A funicular railway at the Hohensalzburg Fortress in Austria. The line originally used wooden rails and a hemp haulage rope and was operated by human or animal power, through a treadwheel . The line is still operational, although in updated form and is possibly the oldest operational railway. Wagonways (or tramways ) using wooden rails, hauled by horses, started appearing in the 1550s to facilitate

828-492: A hydro-electric plant at Lauffen am Neckar and Frankfurt am Main West, a distance of 280 km (170 mi). Using experience he had gained while working for Jean Heilmann on steam–electric locomotive designs, Brown observed that three-phase motors had a higher power-to-weight ratio than DC motors and, because of the absence of a commutator , were simpler to manufacture and maintain. However, they were much larger than

966-701: A passing siding . Service on the line was every two hours. The first streetcar arrived in Guelph on 12 August 1917. In the city, the trains travelled down Gordon Street to Bay Street (now James Street East), followed the Eramosa River to Speedwell, near the access to the Prison Farm. From April, 1926, there was hourly weekday service east of Georgetown . When the Toronto Transportation Commission took over all TSR lines within

1104-431: A steam engine that provides adhesion. Coal , petroleum , or wood is burned in a firebox , boiling water in the boiler to create pressurized steam. The steam travels through the smokebox before leaving via the chimney or smoke stack. In the process, it powers a piston that transmits power directly through a connecting rod (US: main rod) and a crankpin (US: wristpin) on the driving wheel (US main driver) or to

1242-469: A transformer in the locomotive converts the high-voltage low-current power to low-voltage high current used in the traction motors that power the wheels. Modern locomotives may use three-phase AC induction motors or direct current motors. Under certain conditions, electric locomotives are the most powerful traction. They are also the cheapest to run and provide less noise and no local air pollution. However, they require high capital investments both for

1380-683: A TSR bridge can still be found in the Meadowvale neighbourhood of Mississauga, Ontario . In Halton Hills , the railbed can be readily seen running parallel to the Canadian National track between Acton and Limehouse . The Toronto Suburban operated one radial and five city routes during its existence. The following route descriptions are in opening date order. The Davenport route commenced service on 6 September 1892. From Keele and Dundas Streets (in The Junction neighbourhood),

1518-486: A button to signal when a passenger wished to disembark at the next stop. The Main Room included green, plush, upholstered, high-backed seats with headrests, footrests and polished bronze handles on the aisle sides. The Smoking Room was equipped with low-backed seats of imitation leather. The motorman's compartment was at the front. The one remaining TSR car is number 24, built in 1914, reusing an 1897-vintage Taylor truck. After

SECTION 10

#1732801266826

1656-616: A corridor to be " Rail Banked " or placed on hold for possible conversion back to active status when or if future need demands. While many rail trails have been built, other proposals have been cancelled by community opposition. The stature of the conversion organization, community involvement, and government willingness are key factors. On the other hand, there are a growing number of cases where existing rails and infrastructure, in service or not, are being called to be torn up for trails. Two cases of this are in New York State , against

1794-550: A diesel locomotive from the company in 1909. The world's first diesel-powered locomotive was operated in the summer of 1912 on the Winterthur–Romanshorn railway in Switzerland, but was not a commercial success. The locomotive weight was 95 tonnes and the power was 883 kW with a maximum speed of 100 km/h (62 mph). Small numbers of prototype diesel locomotives were produced in a number of countries through

1932-478: A double track plateway, erroneously sometimes cited as world's first public railway, in south London. William Jessop had earlier used a form of all-iron edge rail and flanged wheels successfully for an extension to the Charnwood Forest Canal at Nanpantan , Loughborough, Leicestershire in 1789. In 1790, Jessop and his partner Outram began to manufacture edge rails. Jessop became a partner in

2070-439: A historic 22-mile railroad corridor circling downtown and connecting many neighborhoods directly to each other. The Rails-to-Trails Conservancy is a nationwide nonprofit group that advocates for rail trails and has many documents and advice on building a rail trail. Per their records, the U.S. currently has 22,107 miles of rail trail complete. As of 2015 , Michigan has the most total mileage (2,381) of any state. Germany has

2208-437: A large turning radius in its design. While high-speed rail is most often designed for passenger travel, some high-speed systems also offer freight service. Since 1980, rail transport has changed dramatically, but a number of heritage railways continue to operate as part of living history to preserve and maintain old railway lines for services of tourist trains. A train is a connected series of rail vehicles that move along

2346-672: A large brick building that had six tracks. The facility had some yard tracks and a wye. The Woodbridge line had its own temporary barn on the Massey-Harris Co. property (on Weston Road) from November, 1923 until May, 1926 when the Woodbridge line was closed. The TSR originally used Toronto gauge which allowed the TSR and the Toronto Railway Company to share tracks at Dundas and Keele Streets. By January, 1917,

2484-498: A larger locomotive named Galvani , exhibited at the Royal Scottish Society of Arts Exhibition in 1841. The seven-ton vehicle had two direct-drive reluctance motors , with fixed electromagnets acting on iron bars attached to a wooden cylinder on each axle, and simple commutators . It hauled a load of six tons at four miles per hour (6 kilometers per hour) for a distance of one and a half miles (2.4 kilometres). It

2622-423: A locomotive. This involves one or more powered vehicles being located at the front of the train, providing sufficient tractive force to haul the weight of the full train. This arrangement remains dominant for freight trains and is often used for passenger trains. A push–pull train has the end passenger car equipped with a driver's cab so that the engine driver can remotely control the locomotive. This allows one of

2760-634: A loop in an open field on the east side of the Humber River . The route ran from Keele and Dundas west on Dundas Street to Lambton . The Lambton line had a passing siding at Willard Avenue. It was recorded that when the car swung around the Lambton loop "that the conductor would holler to the motorman to go slow around it so he could have a quick thirst-quencher ..." as the car passed the Lambton Hotel where passengers often waited. In 1923,

2898-658: A new alignment west on Davenport Road from Ford Street, then north on Old Weston Road to the new Townsley Loop at Townsley Street. The former TSR route was split between the TTC Davenport route to Dovercourt Road, and the northern portion of the Dovercourt route to Bathurst Street. In April, 1893, the Crescent route began operation running from Keele and Dundas Streets, west on Dundas Street , south on Gilmour Avenue, east on Louisa Street (today St. Johns Road), south on

SECTION 20

#1732801266826

3036-521: A number of cities disused rail tracks have been converted into linear parks . One example is the High Line (also known as "High Line Park"), a 1.45-mile-long (2.33 km) elevated linear park created on an elevated section of a disused New York Central Railroad . Inspired by the 3-mile-long (4.8 km) Promenade plantée (tree-lined walkway), a similar project in Paris completed in 1993,

3174-477: A number of trains per hour (tph). Passenger trains can usually be into two types of operation, intercity railway and intracity transit. Whereas intercity railway involve higher speeds, longer routes, and lower frequency (usually scheduled), intracity transit involves lower speeds, shorter routes, and higher frequency (especially during peak hours). Intercity trains are long-haul trains that operate with few stops between cities. Trains typically have amenities such as

3312-484: A pedestrian and bicycle trail. The development of rail trails in southeastern Australia can be traced to the gold rushes of the second half of the 19th century. Dozens of rail lines sprang up, aided by the overly enthusiastic " Octopus Act ", but soon became unprofitable as the gold ran out, leading to a decreased demand for timber in turn. Decades later, these easements found a new use as tourist drawcards, once converted to rail trails. Dozens exist in some form, like

3450-676: A piece of circular rail track in Bloomsbury , London, the Catch Me Who Can , but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. The first commercially successful steam locomotive was Matthew Murray 's rack locomotive Salamanca built for the Middleton Railway in Leeds in 1812. This twin-cylinder locomotive

3588-465: A pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. He built the locomotive Blücher , also a successful flanged -wheel adhesion locomotive. In 1825 he built the locomotive Locomotion for the Stockton and Darlington Railway in the northeast of England, which became the first public steam railway in

3726-584: A rail to trail conversion. Even residents who are not encroaching on railway lands may oppose conversion on the grounds of increased traffic in the area and the possibility of a decline in personal security. Because linear corridors of land are only valuable if they are intact, special laws regulate the abandonment of a railroad corridor. In the United States, the Surface Transportation Board (STB) regulates railroads, and can allow

3864-483: A rail trail, reserved for pedestrian use and bicycles on paved portions. The rail bed spans the length of the island, and connected Hamilton to St. George's and several villages, though several bridges are derelict, causing the trail to be fragmented. The Kettle Valley Rail Trail in British Columbia uses a rail corridor that was originally built for the now-abandoned Kettle Valley Railway . The trail

4002-439: A revival in recent decades due to road congestion and rising fuel prices, as well as governments investing in rail as a means of reducing CO 2 emissions . Smooth, durable road surfaces have been made for wheeled vehicles since prehistoric times. In some cases, they were narrow and in pairs to support only the wheels. That is, they were wagonways or tracks. Some had grooves or flanges or other mechanical means to keep

4140-739: A single lever to control both engine and generator in a coordinated fashion, and was the prototype for all diesel–electric locomotive control systems. In 1914, world's first functional diesel–electric railcars were produced for the Königlich-Sächsische Staatseisenbahnen ( Royal Saxon State Railways ) by Waggonfabrik Rastatt with electric equipment from Brown, Boveri & Cie and diesel engines from Swiss Sulzer AG . They were classified as DET 1 and DET 2 ( de.wiki ). The first regular used diesel–electric locomotives were switcher (shunter) locomotives . General Electric produced several small switching locomotives in

4278-407: A standard. Following SNCF's successful trials, 50 Hz, now also called industrial frequency was adopted as standard for main-lines across the world. Earliest recorded examples of an internal combustion engine for railway use included a prototype designed by William Dent Priestman . Sir William Thomson examined it in 1888 and described it as a "Priestman oil engine mounted upon a truck which

Toronto Suburban Railway - Misplaced Pages Continue

4416-632: A terminus about one-half mile (800 m) away. A funicular railway was also made at Broseley in Shropshire some time before 1604. This carried coal for James Clifford from his mines down to the River Severn to be loaded onto barges and carried to riverside towns. The Wollaton Wagonway , completed in 1604 by Huntingdon Beaumont , has sometimes erroneously been cited as the earliest British railway. It ran from Strelley to Wollaton near Nottingham . The Middleton Railway in Leeds , which

4554-549: A total of 1,200 km (750 mi) , a significant figure considering the size of the country. The gradient is never more than six per cent, and the tracks are open to all forms of non-motorised travellers, including cyclists, horse-riders, hikers and even roller-bladers. There is also the Vennbahn , which runs along an unusual border between Belgium and Germany. Baana is an old cargo rail track in Helsinki converted into

4692-408: A wheel. This was a large stationary engine , powering cotton mills and a variety of machinery; the state of boiler technology necessitated the use of low-pressure steam acting upon a vacuum in the cylinder, which required a separate condenser and an air pump . Nevertheless, as the construction of boilers improved, Watt investigated the use of high-pressure steam acting directly upon a piston, raising

4830-531: Is a means of transport using wheeled vehicles running in tracks , which usually consist of two parallel steel rails . Rail transport is one of the two primary means of land transport , next to road transport . It is used for about 8% of passenger and freight transport globally, thanks to its energy efficiency and potentially high speed . Rolling stock on rails generally encounters lower frictional resistance than rubber-tyred road vehicles, allowing rail cars to be coupled into longer trains . Power

4968-410: Is a single, self-powered car, and may be electrically propelled or powered by a diesel engine . Multiple units have a driver's cab at each end of the unit, and were developed following the ability to build electric motors and other engines small enough to fit under the coach. There are only a few freight multiple units, most of which are high-speed post trains. Steam locomotives are locomotives with

5106-402: Is dictated by the free market value of the land, so that land in urban and industrial cores is often impractical to purchase and convert. Therefore, rail trails may end on the fringes of urban areas or near industrial areas and resume later, as discontinuous portions of the same rail line, separated by unaffordable or inappropriate land. A railroad right-of-way (easement) width varies based on

5244-399: Is dominant. Electro-diesel locomotives are built to run as diesel–electric on unelectrified sections and as electric locomotives on electrified sections. Alternative methods of motive power include magnetic levitation , horse-drawn, cable , gravity, pneumatics and gas turbine . A passenger train stops at stations where passengers may embark and disembark. The oversight of the train is

5382-408: Is usually provided by diesel or electrical locomotives . While railway transport is capital-intensive and less flexible than road transport, it can carry heavy loads of passengers and cargo with greater energy efficiency and safety. Precursors of railways driven by human or animal power have existed since antiquity, but modern rail transport began with the invention of the steam locomotive in

5520-556: Is worked on a temporary line of rails to show the adaptation of a petroleum engine for locomotive purposes." In 1894, a 20 hp (15 kW) two axle machine built by Priestman Brothers was used on the Hull Docks . In 1906, Rudolf Diesel , Adolf Klose and the steam and diesel engine manufacturer Gebrüder Sulzer founded Diesel-Sulzer-Klose GmbH to manufacture diesel-powered locomotives. Sulzer had been manufacturing diesel engines since 1898. The Prussian State Railways ordered

5658-652: The Beltline Trail and the West Toronto Railpath . In central Ontario, the former Victoria Railway line, which runs 89 kilometres (55 mi) from the town of Lindsay, Ontario , north to the village of Haliburton, in Haliburton County , serves as a public recreation trail. It can be used for cross country skiing, walking, and snowmobiling in the winter months, and walking, cycling, and horse riding from spring to autumn. The majority of

Toronto Suburban Railway - Misplaced Pages Continue

5796-796: The Catskill Mountain Railroad in Kingston, New York , and the Adirondack Scenic Railroad in Old Forge, New York . In Connecticut, the not-in-service section of track on the Valley Railroad has been proposed by locals to be converted to trail. Though perceived by residents to be, as it has not carried a train since the 1960s, the railroad has never been formally abandoned. The Connecticut Department of Energy and Environmental Protection acquired

5934-924: The Middlewood Way in Cheshire and the Ebury Way in Watford . Notable rural rail trails include the Dava Way , running along the route of the former Highland Railway between Grantown and Forres in the Scottish Highlands , and the High Peak Trail in the English Peak District . In London , a more unusual scheme has been proposed to convert some disused London Underground tunnels into subterranean rail trails under

6072-747: The Milton Keynes redway system runs throughout Milton Keynes in Buckinghamshire, England, in parts using the former trackbed of the defunct Wolverton to Newport Pagnell Line (closed 1962) and the Grand Union Canal towpath. Together, these paths form part of the long-distance National Cycle Network Route 6 and Route 51 . Other urban and suburban rail trails include the Fallowfield Loop Line in Manchester ,

6210-598: The National Arts Council . The disused railway consists of the main line from the Tanjong Pagar railway station to Woodlands, extending either 24 km (15 mi) or 26 km (16 mi), depending on the source. There is also the Jurong spur line, 14 km (8.7 mi) in length. The area occupied by the railways is at least 80 ha (200 acres), and up to 173.7 ha (429 acres) when

6348-512: The Toronto Transportation Commission but with the TofYR paying all capital costs and any operating deficits. Track within the Town of Weston was subsequently transferred to the TofYR in 1925. The Canadian National Electric Railways let the TSR bond interest go unpaid on 15 July 1931, causing the Guelph line to go into receivership and be shut down on 15 August 1931. Eventually, in 1934, CNER paid off

6486-518: The Toronto Transportation Commission took over the line from Keele Street to Runnymede Road, and later to the Lambton Loop, converting the line back to Toronto gauge in 1924. The line was closed on 17 August 1928 being replaced by bus service. The Woodbridge line was built as a 7.9 mi (12.7 km) extension of the Weston line. It commenced operation on 10 October 1914. North of Weston,

6624-581: The Trans Canada Trail and other walking trails are abandoned railways. A small railway line from Musquodoboit Harbour ( Musquodoboit Trailway ) to Dartmouth are nearly fully used by community members and tourists. Another extremely large section is used from Halifax to New Germany to Yarmouth to Grand Pre . A considerable part of the Trans Canada Trail are repurposed defunct rail lines donated to provincial governments by CP and CN rail rebuilt as walking trails. The main section runs along

6762-692: The United Kingdom at the beginning of the 19th century. The first passenger railway, the Stockton and Darlington Railway , opened in 1825. The quick spread of railways throughout Europe and North America, following the 1830 opening of the first intercity connection in England, was a key component of the Industrial Revolution . The adoption of rail transport lowered shipping costs compared to water transport, leading to "national markets" in which prices varied less from city to city. In

6900-615: The United Kingdom , South Korea , Scandinavia, Belgium and the Netherlands. The construction of many of these lines has resulted in the dramatic decline of short-haul flights and automotive traffic between connected cities, such as the London–Paris–Brussels corridor, Madrid–Barcelona, Milan–Rome–Naples, as well as many other major lines. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates

7038-414: The overhead lines and the supporting infrastructure, as well as the generating station that is needed to produce electricity. Accordingly, electric traction is used on urban systems, lines with high traffic and for high-speed rail. Diesel locomotives use a diesel engine as the prime mover . The energy transmission may be either diesel–electric , diesel-mechanical or diesel–hydraulic but diesel–electric

SECTION 50

#1732801266826

7176-458: The puddling process in 1784. In 1783 Cort also patented the rolling process , which was 15 times faster at consolidating and shaping iron than hammering. These processes greatly lowered the cost of producing iron and rails. The next important development in iron production was hot blast developed by James Beaumont Neilson (patented 1828), which considerably reduced the amount of coke (fuel) or charcoal needed to produce pig iron. Wrought iron

7314-418: The rotary phase converter , enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high-voltage national networks. An important contribution to the wider adoption of AC traction came from SNCF of France after World War II. The company conducted trials at AC 50 Hz, and established it as

7452-540: The 1880s, railway electrification began with tramways and rapid transit systems. Starting in the 1940s, steam locomotives were replaced by diesel locomotives . The first high-speed railway system was introduced in Japan in 1964, and high-speed rail lines now connect many cities in Europe , East Asia , and the eastern United States . Following some decline due to competition from cars and airplanes, rail transport has had

7590-521: The 1930s (the famous " 44-tonner " switcher was introduced in 1940) Westinghouse Electric and Baldwin collaborated to build switching locomotives starting in 1929. In 1929, the Canadian National Railways became the first North American railway to use diesels in mainline service with two units, 9000 and 9001, from Westinghouse. Although steam and diesel services reaching speeds up to 200 km/h (120 mph) were started before

7728-508: The 1960s in Europe, they were not very successful. The first electrified high-speed rail Tōkaidō Shinkansen was introduced in 1964 between Tokyo and Osaka in Japan. Since then high-speed rail transport, functioning at speeds up to and above 300 km/h (190 mph), has been built in Japan, Spain, France , Germany, Italy, the People's Republic of China, Taiwan (Republic of China),

7866-600: The 37-kilometre (23 mi) Port Fairy to Warrnambool Rail Trail , but only a few – such as the 95-kilometre (59 mi) Murray to the Mountains Rail Trail — have been fully developed. Progress is frequently hampered by trestle bridges in unsafe condition, easements that have been sold off to farmers, and lack of funds. Funding is typically contributed in roughly equal parts from federal, state, and local governments, with voluntary labour and in kind donations contributed by local groups. The latest addition to

8004-464: The 40 km Burgdorf–Thun line , Switzerland. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than a short section. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The electrical system was three-phase at 3 kV 15 Hz. In 1918, Kandó invented and developed

8142-530: The Butterley Company in 1790. The first public edgeway (thus also first public railway) built was Lake Lock Rail Road in 1796. Although the primary purpose of the line was to carry coal, it also carried passengers. These two systems of constructing iron railways, the "L" plate-rail and the smooth edge-rail, continued to exist side by side until well into the early 19th century. The flanged wheel and edge-rail eventually proved its superiority and became

8280-514: The DC motors of the time and could not be mounted in underfloor bogies : they could only be carried within locomotive bodies. In 1894, Hungarian engineer Kálmán Kandó developed a new type 3-phase asynchronous electric drive motors and generators for electric locomotives. Kandó's early 1894 designs were first applied in a short three-phase AC tramway in Évian-les-Bains (France), which was constructed between 1896 and 1898. In 1896, Oerlikon installed

8418-540: The Davenport line protected by interlocking signals. The Davenport line used express cars to transport milk from the west to dairies at the eastern end of the line. On 15 November 1923, the Toronto Transit Commission took over the Davenport line, then double-tracked the line and converted it to Toronto gauge. The TTC decided to abandon the TSR track on St. Clair Avenue and Ford Street and to build

SECTION 60

#1732801266826

8556-740: The Guelph line's right-of-way is used by the Halton County Radial Railway museum. The areas where tracks were once located include the walking trails along the south bank of the Eramosa River, the Smith Property loop in Puslinch and the Halton County Radial Railway site on Guelph Line, Milton. A power house on Weston Road is now a lumber store and a power house on James Street East in Guelph has been converted to residential use. The remains of

8694-752: The High Line has been redesigned and planted as an aerial greenway and rails-to-trails park. Railroads in North America were often built with a mix of purchased land, government land grants, and easements. The land deeds can be over a hundred years old, land grants might be conditional upon continuous operation of the line, and easements may have expired, all expensive and difficult issues to determine at law. Railroad property rights have often been poorly defined and sporadically enforced, with neighboring property owners intentionally or accidentally using land they do not own. Such encroachers often later oppose

8832-731: The Lambton, Weston and Davenport lines for some years, connecting them with the St. Clair and Dundas routes. In the same year, TSR was amalgamated with the Toronto Eastern Railway , leaving the Canadian National Electric Railways (CNER) with the Guelph and Woodbridge lines. In 1924, the Township of York acquired the TSR's track within its boundaries, which subsequently became the Township of York Railways. These lines were managed under contract by

8970-415: The Rail Trail scene in Victoria is The Great Victorian Rail Trail which is the longest rail trail in Victoria covering 134 km (83 mi). It has become popular with tourists as it meanders through steep valleys and open farm country. The Rail Trails Australia website is a good source of local information. about trails in Australia. A number of rail trails have been established through New Zealand;

9108-471: The Sarnia Bridge was inducted into the North America Railway Hall of Fame . A railroad between Gateway Road and Raleigh Street (i.e. streets immediately parallel to the railway on each side) in Winnipeg , Manitoba , was turned into a 7 km (4.3 mi) asphalt trail in 2007. It is called the Northeast Pioneers Greenway, and there are plans for expansion into East St. Paul , and eventually to Birds Hill Park. In Nova Scotia , almost every section of

9246-440: The TSR a franchise to cover the full length of Dundas Street within its limits, west of the Humber River . Expansion plans were hampered because of the shortness of capital and labour, as well as by potential takeover interest by the Hydro-Electric Power Commission of Ontario , but it did convert its power source from internally generated 500V DC from its own plant, to high-voltage AC power from Niagara Falls . Allan Royce

9384-409: The TSR had converted all lines to standard gauge because it wanted to interchange freight cars with steam railways. However, very little such traffic materialized on the TSR. The new Guelph line would use standard gauge from its first day, which would allow the TSR Guelph line to enter downtown Guelph via the tracks of the Guelph Radial Railway , a standard gauge streetcar system. After August, 1912,

9522-425: The TSR lines as that measure was rejected by Toronto voters in a plebiscite held on 1 January 1923, and the issue was not pressed by the Province as the government was subsequently defeated in the 1923 general election . However, routes inside the city were purchased by the City of Toronto in 1923, which then turned them over to the Toronto Transportation Commission . The TTC did upgrade the city routes, and operated

9660-443: The TSR was absorbed by the CNR in 1923, the car was renumbered as CN 15702 and used at Neebing Yard in Fort William, Ontario . It was retired in the 1960s, donated to the Canadian Railway Museum , leased to the Edmonton Radial Railway Society (ERRS) in 1989 then sold to ERRS on April 7, 2022. It has been fully restored and is in operation at Fort Edmonton Park . Railway Rail transport (also known as train transport )

9798-420: The Toronto Suburban Street Railway Company was incorporated and acquired these two companies, giving it 7.5 miles (12.1 km) of lines in the northwestern suburbs of Toronto. In 1900, the company name was shortened to Toronto Suburban Railway Company, and in 1904 it was authorized to extend its operations to Hamilton, the Niagara Peninsula, Brampton, Guelph and Woodbridge. The Township of Etobicoke also granted

9936-635: The Toronto city limits and converted them back to Toronto gauge, the TSR's Lambton Carhouse became the Toronto terminus of the Guelph line. In 1925 the route was extended to a new station at Keele Street and St. Clair, situated between the TTC's streetcar loop and the CNR tracks. It was connected by new off-street track from Lambton. In 1925, The TSR opened Eldorado Park in order to spur Sunday ridership. The TSR owned this 100-hectare (250-acre) recreational property, which

10074-618: The best known are the Hauraki Rail Trail (linking Thames, Paeroa, Te Aroha and Waikino/Waihi), Otago Central Rail Trail and the Little River Rail Trail . The New Zealand Cycle Trail project, a Government-led initiative, will greatly accelerate the establishment of new trails. The first seven projects (not all of them rail trails, though) were announced in July 2009 and will receive NZ$ 9 million in funding of

10212-568: The bondholders at 25 cents on the dollar, following which the receivership was ended on 13 September 1935, and the line was promptly dismantled and equipment disposed. Since the TSR's closure, the right-of-way has become popular for strolling and hiking . From 1970, the Guelph Hiking Trail Club was formed to establish and maintain a formal trail on it between the Bruce Trail at Limehouse and Guelph. A small part of

10350-651: The border from Malaysia. Government agencies such as the Urban Redevelopment Authority (URA) and the Singapore Land Authority (SLA) have taken responsibility for developing and implementing ideas and activities for the former rail lands. The URA has a dedicated web site on Rail Corridor. An example of activities permitted include street art on a section of the disused railway, supported by the SLA, URA, Land Transport Authority and

10488-602: The city, but this scheme has not been officially approved. With more than 2,500 kilometers of rail trails (Via Verde) in a network of 117 cycling and walking itineraries, Spain ranks high in the European greenways scene. The trails are managed or coordinated by the Spanish Railways Foundation, an institution created in 1985. Many of the converted tracks were originally built for the mining industry, connecting remote mountain sites with port locations on

10626-457: The coast, now offering picturesque rides from wild interior landscapes to the seaside, following near-flat routes with long-spanning viaducts and bridges, plus a number of tunnels. Cuts to Ireland's once expansive rail network in the mid 20th century left Ireland with a vast network of disused railways. While many lines were ripped up and the sections of the land acquired by private owners, a number of former railways do exist intact, thus providing

10764-430: The duty of a guard/train manager/conductor . Passenger trains are part of public transport and often make up the stem of the service, with buses feeding to stations. Passenger trains provide long-distance intercity travel, daily commuter trips, or local urban transit services, operating with a diversity of vehicles, operating speeds, right-of-way requirements, and service frequency. Service frequencies are often expressed as

10902-402: The end of the 19th century, because they were cleaner compared to steam-driven trams which caused smoke in city streets. In 1784 James Watt , a Scottish inventor and mechanical engineer, patented a design for a steam locomotive . Watt had improved the steam engine of Thomas Newcomen , hitherto used to pump water out of mines, and developed a reciprocating engine in 1769 capable of powering

11040-471: The end of the 19th century, improving the quality of steel and further reducing costs. Thus steel completely replaced the use of iron in rails, becoming standard for all railways. The first passenger horsecar or tram , Swansea and Mumbles Railway , was opened between Swansea and Mumbles in Wales in 1807. Horses remained the preferable mode for tram transport even after the arrival of steam engines until

11178-527: The engine by one power stroke. The transmission system employed a large flywheel to even out the action of the piston rod. On 21 February 1804, the world's first steam-powered railway journey took place when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren ironworks, near Merthyr Tydfil in South Wales . Trevithick later demonstrated a locomotive operating upon

11316-475: The era of great expansion of railways that began in the late 1860s. Steel rails lasted several times longer than iron. Steel rails made heavier locomotives possible, allowing for longer trains and improving the productivity of railroads. The Bessemer process introduced nitrogen into the steel, which caused the steel to become brittle with age. The open hearth furnace began to replace the Bessemer process near

11454-426: The federal government passing legislation promoting the use of railbanking for abandoned railroad corridors in 1983 which was upheld by the U.S. Supreme Court in 1990. This process preserves rail corridors for possible future rail use with interim use as a trail. By the 1970s, even main lines were being sold or abandoned. This was especially true when regional rail lines merged and streamlined their operations. As both

11592-522: The first commercial example of the system on the Lugano Tramway . Each 30-tonne locomotive had two 110 kW (150 hp) motors run by three-phase 750 V 40 Hz fed from double overhead lines. Three-phase motors run at a constant speed and provide regenerative braking , and are well suited to steeply graded routes, and the first main-line three-phase locomotives were supplied by Brown (by then in partnership with Walter Boveri ) in 1899 on

11730-600: The former Galway to Clifden railway into a greenway, but negotiations are still underway with landowners regarding its routing. A section of the Waterford, Limerick and Western Railway railway line, from Claremorris to Collooney has been touted for redevelopment as a greenway, but has met with some recent opposition from groups wishing for reestablishment of the railway itself. The RAVeL network in Belgium combines converted tracks, byways and towpaths , adding up to

11868-472: The highest possible radius. All these features are dramatically different from freight operations, thus justifying exclusive high-speed rail lines if it is economically feasible. Rail trail The Bermuda Railway ceased to operate as such when the only carrier to exist in Bermuda folded in 1948. Some of the former right of way were converted for automobile traffic, and in 1984 18 miles were converted to

12006-571: The history of the railroad. Their primary revenue is tourist operations, so rail traffic is seasonal; though all three have been granted rights to carry freight, should customers show interest. Though rare, there are several cases in which trails convert back to active railroads. One example occurred in 2012 in Clarence, Pennsylvania , where the R.J. Corman Railroad Company received permission to rebuild 20 miles (32 km) of railbanked line to serve new industries. Conrail had ceased operating over

12144-595: The land around the Tanjong Pagar Railway Station and other nodes are included. Given the location of the railway lands in land scarce Singapore, there was concern that the lands would be developed. Organisations such as the Nature Society Singapore developed comprehensive plans to maintain the rail lands for nature-related pursuits. The Green Corridor web site is a campaign website dedicated to preserving its natural form. In

12282-573: The largest number of rail trails in Europe, with 677 rail trails with a total length of 5,020 kilometres (3,120 mi) (as at February 2015). 80 more projects are being planned or under construction. Some of the longest rail trails are in the state of Rhineland-Palatinate . These are the Maare-Mosel-Radweg with 39 kilometres (24 mi) on the old rail track, the Ruwer-Hochwald-Radweg with 44 kilometres (27 mi) on

12420-1230: The limit being regarded at 200 to 350 kilometres per hour (120 to 220 mph). High-speed trains are used mostly for long-haul service and most systems are in Western Europe and East Asia. Magnetic levitation trains such as the Shanghai maglev train use under-riding magnets which attract themselves upward towards the underside of a guideway and this line has achieved somewhat higher peak speeds in day-to-day operation than conventional high-speed railways, although only over short distances. Due to their heightened speeds, route alignments for high-speed rail tend to have broader curves than conventional railways, but may have steeper grades that are more easily climbed by trains with large kinetic energy. High kinetic energy translates to higher horsepower-to-ton ratios (e.g. 20 horsepower per short ton or 16 kilowatts per tonne); this allows trains to accelerate and maintain higher speeds and negotiate steep grades as momentum builds up and recovered in downgrades (reducing cut and fill and tunnelling requirements). Since lateral forces act on curves, curvatures are designed with

12558-458: The line from Penn Central in 1969, and subsequently signed a long-term lease with the railroad. The railroad has been continually working to bring this section of the line back into service. Both Departments strongly support the preservation of the line, and have provided support to the railroad with property encroachment from abutters and the provision of railroad ties . All three of these examples are heritage railroads , which serve to protect

12696-605: The line in 1990, and 10 miles (16 km) was converted to the Snow Shoe Rails to Trails. Most original rail lines were surveyed for ease of transport and gentle (often less than 2%) grades . Therefore, the rail trails that succeeded them are often fairly straight and ideally suited to overcome steep or awkward terrain such as hills, escarpments, rivers, swamps, etc. Rail trails often share space with linear utilities such as pipelines, electrical transmission wires, and telephone lines. Most purchase of railway land

12834-476: The line to Weston. After converting the line back to Toronto gauge, through service from Keele and Dundas Streets to Humber Street in Weston started on 28 November 1925. On 13 September 1948, the TTC replaced the Weston streetcars with trolley buses. In 1896, the Lambton line was built as an extension of the Crescent Line along Dundas Street west of Gilmore Avenue, across Scarlett Road, down Lambton Hill to

12972-557: The line was 12.02 mi (19.34 km) long. After the Toronto Transportation Commission converted the Weston line to Toronto gauge starting in 1923, the northern part of the standard gauge Woodbridge line was cut off from the old TSR system. The Woodbridge line closed in 1926. The Guelph line ran from Keele and Dundas Streets to the Grand Trunk Railway station in Guelph . All intermediate stations except Limehouse had

13110-473: The line was essentially a cross-country rural trolley ending in Woodbridge with a short spur and a wooden shelter as a terminal on Pine Street (now Woodbridge Avenue) east of Wallace Street and just west of Humber River. There were passing sidings at Vaughan Town Line (Steeles Avenue east of Kipling), Thistletown and Albion Road as well as Kipling and Albion. From Keele and Dundas Streets to Woodbridge,

13248-490: The line was promptly dismantled. The TSR's first carhouse was built on the south side of St. Clair Avenue just west of Old Weston Road. It had a loop to turn single-end cars. It closed in 1923. Lambton Carhouse , the second TSR carhouse, was opened to service the Guelph radial cars as well as local cars. It was next to Lambton Park and just west of Scarlett Road on the south side of the CPR main line. The car barn and shops were in

13386-429: The locomotive-hauled train's drawbacks to be removed, since the locomotive need not be moved to the front of the train each time the train changes direction. A railroad car is a vehicle used for the haulage of either passengers or freight. A multiple unit has powered wheels throughout the whole train. These are used for rapid transit and tram systems, as well as many both short- and long-haul passenger trains. A railcar

13524-569: The main portion of the B&;O to the new line to New York through a series of tunnels around the edges of Baltimore's downtown. Electricity quickly became the power supply of choice for subways, abetted by the Sprague's invention of multiple-unit train control in 1897. By the early 1900s most street railways were electrified. The London Underground , the world's oldest underground railway, opened in 1863, and it began operating electric services using

13662-755: The majority of rail trails are maintained by either the local authority or charitable organisations such as Sustrans , the Railway Ramblers or Railway Paths . A 31-mile (50 km) section (between Braunton and Meeth ) of the Tarka Trail in Devon is one of the longest of these. Many of these former railway lines form part of the British National Cycle Network , connecting with long-distance paths and towpaths along Britain's extensive network of canals . For example,

13800-433: The mid-1920s. The Soviet Union operated three experimental units of different designs since late 1925, though only one of them (the E el-2 ) proved technically viable. A significant breakthrough occurred in 1914, when Hermann Lemp , a General Electric electrical engineer, developed and patented a reliable direct current electrical control system (subsequent improvements were also patented by Lemp). Lemp's design used

13938-412: The noise they made on the tracks. There are many references to their use in central Europe in the 16th century. Such a transport system was later used by German miners at Caldbeck , Cumbria , England, perhaps from the 1560s. A wagonway was built at Prescot , near Liverpool , sometime around 1600, possibly as early as 1594. Owned by Philip Layton, the line carried coal from a pit near Prescot Hall to

14076-718: The old rail track and the Schinderhannes-Radweg with 36 kilometres (22 mi) on the old track of the Hunsrück Railway . Up to date, the 23 km long Nordbahntrasse in Wuppertal is still the rail trail with the highest standard in Germany and is a prime example of conversion of an abandoned railway track into a multiuser cycling path. With almost 150 lines in use, the United Kingdom has

14214-650: The option for the development of many rail trails in the future. The rail-trail on the former Westport to Achill Island line, known as the Great Western Greenway , was completed in 2011. Much progress has been made on the development of a rail-trail on the former Limerick to Tralee / Fenit line, in the form of the Great Southern Trail . As of 2013, a 36-kilometre (22 mi) section from Rathkeale to Abbeyfeale has been completed. Planning permission has been granted to redevelop

14352-461: The possibility of a smaller engine that might be used to power a vehicle. Following his patent, Watt's employee William Murdoch produced a working model of a self-propelled steam carriage in that year. The first full-scale working railway steam locomotive was built in the United Kingdom in 1804 by Richard Trevithick , a British engineer born in Cornwall . This used high-pressure steam to drive

14490-495: The provincial government after rail service was abandoned on the island of Newfoundland in 1988. The rail corridor stretches from Channel-Port aux Basques in the west to St. John's in the east with branches to Stephenville , Lewisporte , Bonavista , Placentia and Carbonear . Following the abandonment of the Prince Edward Island Railway in 1989, the government of Prince Edward Island purchased

14628-652: The rail industry led to the closure of a number of uneconomical branch lines and redundant mainlines. Some were maintained as short line railways , but many others were abandoned. The first abandoned rail corridor in the United States converted into a recreational trail was the Elroy-Sparta State Trail in Wisconsin , which opened in 1967. The following year the Illinois Prairie Path opened. The conversion of rails to trails hastened with

14766-597: The rail trail passes through sparsely populated areas of the Canadian Shield , with historic trestle bridges crossing several rivers. The old Sarnia Bridge in St. Marys, Ontario , was re-purposed as part of the Grand Trunk Trail . The former Grand Trunk Railway viaduct was purchased from Canadian National Railway in 1995. The Grand Trunk Trail was opened in 1998 with over 3 km (1.9 mi) of paved, accessible trail. In 2012, The re-purposing of

14904-495: The right-of-way to the entire railway system. The Confederation Trail was developed as a tip-to-tip walking/cycling gravel rail trail which doubles as a monitored and groomed snowmobile trail during the winter months, operated by the PEI Snowmobile Association. In Quebec, Le P'tit Train du Nord runs 200 km (120 mi) from Saint-Jérôme to Mont-Laurier . In Toronto , there are two rail trails,

15042-537: The route ran north on Keele Street , east on St. Clair Avenue , south on Ford Street, east on Davenport Road and then south on Bathurst Street ending north of the CPR near today's Hillcrest Complex . This was a single-track line laid in the middle of the street with a passing siding just east of Lansdowne Avenue. From 1917, the Toronto Civic Railway's line on Lansdowne Avenue had a flat crossing with

15180-763: The second-largest network of rail trails in Europe after Germany. The development of rail trails in the United Kingdom grew after a major programme of railway line closures in the 1960s known as the Beeching cuts . The scheme, named after Dr. Richard Beeching , the then chairman of British Railways , decommissioned approximately 5,000 miles (8,000 km) of railway lines all over Great Britain. Many rural and suburban lines were closed along with selected main line trunk routes. Since then, approximately 1,200–2,200 miles (1,900–3,500 km) of disused railway lines in Britain have been converted to public leisure purposes, and today

15318-554: The second-longest, extending for 321 miles (517 km), the longest being the Ohio to Erie Trail in Ohio at 326 miles (525 km). The BeltLine , in Atlanta , Georgia, is currently under construction. In 2030, its anticipated year of completion, it will be one of the longest continuous trails. The Atlanta BeltLine is a sustainable redevelopment project that will provide a network of public parks, multi-use trails and transit along

15456-416: The southern areas of Canada connecting most of Canada's major cities and most populous areas. There is also a long northern arm which runs through Alberta to Edmonton and then up through northern British Columbia to Yukon. The trail is multi-use and depending on the section may allow hikers, bicyclists, horseback riders, cross country skiers and snowmobilers. In North America, the decades-long consolidation of

15594-441: The standard for railways. Cast iron used in rails proved unsatisfactory because it was brittle and broke under heavy loads. The wrought iron invented by John Birkinshaw in 1820 replaced cast iron. Wrought iron, usually simply referred to as "iron", was a ductile material that could undergo considerable deformation before breaking, making it more suitable for iron rails. But iron was expensive to produce until Henry Cort patented

15732-571: The supply of potential trails increased and awareness of the possibilities rose, state governments, municipalities, conservation authorities, and private organizations bought the rail corridors to create, expand or link green spaces . The longest developed rail trail is currently the 240 miles (390 km) Katy Trail in Missouri . When complete, the Cowboy Trail in Nebraska will become

15870-553: The terrain, with a 100 feet (30 m) width being ample enough where little surface grading is required. The initial 705 miles (1,135 km) stretch of the Illinois Central Railroad is the most liberal in the world with a width of 200 feet (61 m) along the whole length of the line. Rail trails are often graded and covered in gravel or crushed stone, although some are paved with asphalt and others are left as dirt. Where rail bridges are incorporated into

16008-475: The time, was Liverpool and Manchester Railway , built in 1830. Steam power continued to be the dominant power system in railways around the world for more than a century. The first known electric locomotive was built in 1837 by chemist Robert Davidson of Aberdeen in Scotland, and it was powered by galvanic cells (batteries). Thus it was also the earliest battery-electric locomotive. Davidson later built

16146-728: The total project budget of NZ$ 50 million. On 24 May 2010, the Singapore and Malaysia governments agreed to move the Singapore terminus of the Keretapi Tanah Melayu Berhad (KTMB) from the Tanjong Pagar railway station in southern Singapore to Woodlands Train Checkpoint in northern Singapore. This resulted in the railway lines in Singapore becoming surplus as the Woodlands terminus is just over

16284-543: The track. Propulsion for the train is provided by a separate locomotive or from individual motors in self-propelled multiple units. Most trains carry a revenue load, although non-revenue cars exist for the railway's own use, such as for maintenance-of-way purposes. The engine driver (engineer in North America) controls the locomotive or other power cars, although people movers and some rapid transits are under automatic control. Traditionally, trains are pulled using

16422-483: The tracks at Dundas and Keele Streets were rearranged so that the standard gauge track of the TSR (running between west and north of the intersection) crossed a new Toronto gauge wye for reversing TRC streetcars coming from the east. The cars were constructed at the Preston Car Company . Car 101, for example, was equipped with 68 seats affair with cherry wood finish throughout, an overhead luggage rack and

16560-480: The trail, the only alterations (if any) tend to be adding solid walking areas on top of ties or trestles, though bridges in poorer condition do receive new guardrails , paint, and reinforcement. If paved, they are especially suitable for people who use wheelchairs. Where applicable, the same trails used in the summer for walking, jogging, and inline skating can be used in the winter for Nordic skiing , snowshoeing , and sometimes snowmobiling . Rails with trails are

16698-471: The transport of ore tubs to and from mines and soon became popular in Europe. Such an operation was illustrated in Germany in 1556 by Georgius Agricola in his work De re metallica . This line used "Hund" carts with unflanged wheels running on wooden planks and a vertical pin on the truck fitting into the gap between the planks to keep it going the right way. The miners called the wagons Hunde ("dogs") from

16836-529: The unpaved Fairview Avenue to Evelyn Crescent. The line was single-track in the middle of the street. About 1894, the line was extended east of Keele and Dundas Streets to Humberside Avenue to meet the streetcars of the Toronto Railway Company . However, in 1899, the TSR sold this extension to the TRC, which extended its operations to a wye -shaped junction at Keele and Dundas Streets. This junction

16974-458: The village of Weston , reaching this terminus on 10 November. Later, the line would be extended a further 1,000 ft (300 m) to the Weston post office. The line ran mostly on the side of the road, but within the village of Weston it ran in the centre of the street. The line was single-track with passing sidings at Seneca Avenue, Buttonwood Avenue and King Street (Weston). In 1923, the Toronto Transportation Commission took over operation of

17112-629: The wheels on track. For example, evidence indicates that a 6 to 8.5 km long Diolkos paved trackway transported boats across the Isthmus of Corinth in Greece from around 600 BC. The Diolkos was in use for over 650 years, until at least the 1st century AD. Paved trackways were also later built in Roman Egypt . In 1515, Cardinal Matthäus Lang wrote a description of the Reisszug ,

17250-559: The world in 1825, although it used both horse power and steam power on different runs. In 1829, he built the locomotive Rocket , which entered in and won the Rainhill Trials . This success led to Stephenson establishing his company as the pre-eminent builder of steam locomotives for railways in Great Britain and Ireland, the United States, and much of Europe. The first public railway which used only steam locomotives, all

17388-512: Was a soft material that contained slag or dross . The softness and dross tended to make iron rails distort and delaminate and they lasted less than 10 years. Sometimes they lasted as little as one year under high traffic. All these developments in the production of iron eventually led to the replacement of composite wood/iron rails with superior all-iron rails. The introduction of the Bessemer process , enabling steel to be made inexpensively, led to

17526-602: Was accomplished by the distribution of weight between a number of wheels. Puffing Billy is now on display in the Science Museum in London, and is the oldest locomotive in existence. In 1814, George Stephenson , inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. Stephenson played

17664-629: Was authorized to operate all day on Sundays, and to be able to transport milk on the Lord's Day as well. Under the Municipal Electric Railway Act, 1922 , local municipalities were authorized to operate radial lines, or enter into agreements with Ontario Hydro to do so, as part of a larger plan to create a radial network spanning the Greater Golden Horseshoe region, but that did not take place with respect to

17802-514: Was built by Siemens. The tram ran on 180 volts DC, which was supplied by running rails. In 1891 the track was equipped with an overhead wire and the line was extended to Berlin-Lichterfelde West station . The Volk's Electric Railway opened in 1883 in Brighton , England. The railway is still operational, thus making it the oldest operational electric railway in the world. Also in 1883, Mödling and Hinterbrühl Tram opened near Vienna in Austria. It

17940-706: Was built in 1758, later became the world's oldest operational railway (other than funiculars), albeit now in an upgraded form. In 1764, the first railway in the Americas was built in Lewiston, New York . In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the upper surface of the wooden rails. This allowed a variation of gauge to be used. At first only balloon loops could be used for turning, but later, movable points were taken into use that allowed for switching. A system

18078-614: Was developed during the 1990s after the Canadian Pacific Railway abandoned train service. The longest rail trail in Canada is the Newfoundland T'Railway that covers a distance of 883 km (549 mi). Protected as a linear park under the provincial park system, the T'Railway consists of the railbed of the historic Newfoundland Railway as transferred from its most recent owner, Canadian National Railway , to

18216-548: Was introduced in which unflanged wheels ran on L-shaped metal plates, which came to be known as plateways . John Curr , a Sheffield colliery manager, invented this flanged rail in 1787, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks . In 1803, William Jessop opened the Surrey Iron Railway ,

18354-489: Was light enough to not break the edge-rails track and solved the problem of adhesion by a cog-wheel using teeth cast on the side of one of the rails. Thus it was also the first rack railway . This was followed in 1813 by the locomotive Puffing Billy built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This

18492-541: Was located on the Credit River near Churchville . One period photo shows a 12-coach train pulled by electric locomotive number 300 bound for Eldorado Park. By 1931, the Guelph line was only carrying 300 daily passengers, compared to 1,662 cars and nine buses per day travelling along the essentially parallel Highway 7 . A bond interest default caused the Guelph line to go into receivership and be shut down on 15 August 1931. After receivership ended on 13 September 1935,

18630-536: Was tested on the Edinburgh and Glasgow Railway in September of the following year, but the limited power from batteries prevented its general use. It was destroyed by railway workers, who saw it as a threat to their job security. By the middle of the nineteenth century most european countries had military uses for railways. Werner von Siemens demonstrated an electric railway in 1879 in Berlin. The world's first electric tram line, Gross-Lichterfelde Tramway , opened in Lichterfelde near Berlin , Germany, in 1881. It

18768-423: Was the first tram line in the world in regular service powered from an overhead line. Five years later, in the U.S. electric trolleys were pioneered in 1888 on the Richmond Union Passenger Railway , using equipment designed by Frank J. Sprague . The first use of electrification on a main line was on a four-mile section of the Baltimore Belt Line of the Baltimore and Ohio Railroad (B&O) in 1895 connecting

18906-404: Was the largest shareholder of the TSR, eventually gaining a controlling interest. In 1911, that was sold to William Mackenzie and Donald Mann , who incorporated it into the quickly-expanding Canadian Northern Railway system. At that time, Sir Adam Beck of Ontario Hydro and Henry Thornton of Canadian National Railways had also expressed an interest in the TSR. In April 1915, the company

19044-424: Was used by both the TSR and the TRC as both were Toronto gauge at that time. The Crescent route was closed on 28 November 1923 due to poor ridership, and track along Fairview Avenue was removed. The Weston line was constructed in 1894. From Keele and Dundas Streets, the line followed the Davenport route to St. Clair Avenue where a switch allowed the Weston route to proceed north along Weston Road to Church Street in

#825174