Misplaced Pages

#126873

142-540: All generations of the A6 have offered either front-wheel-drive or Torsen -based four-wheel-drive , marketed by Audi as their quattro system. The A6 has also been used as the basis for the company's Allroad models since 1999. Both petrol and diesel versions of the A6 are offered. The wide range of engines available have power outputs ranging from 150 to 333 PS (110 to 245 kW). These are inline four-cylinder turbocharged engines and more powerful 3-litre units in

284-559: A Bosch Motronic electronic engine control unit (ECU), producing a motive power output of 169 kW (230 PS; 227 bhp) at 5,900 rpm and 326 N⋅m (240 lbf⋅ft) at around 1,950 rpm, on high octane "Super Plus" 98RON unleaded petrol. This engine gave the S6 a top speed of 235 km/h (146.0 mph), and allowed it to accelerate from 0 to 100 km/h (62.1 mph) in 6.7 seconds; with 160 km/h (99.4 mph) being reached in 17.5 seconds. The vehicle

426-433: A Victoria Combination . It was variously powered by 1.75 or 2.5 horsepower (1.30 or 1.86 kW) De Dion-Bouton engine or a water cooled 3.5 horsepower (2.6 kW) Aster engine. The engine was mounted on the front axle and so was rotated by the tiller steering. The name Victoria Combination described the lightweight, two-seater trailer commonly known as a Victoria, combined with the rear axle and drive mechanism from

568-426: A longitudinal engine layout and rear-wheel drive (or all-wheel drive). However, V8 engines have also occasionally been used in transverse engine front-wheel drive vehicles, sometimes using closer cylinder bore spacings and narrower cylinder bank angles to reduce their space requirements. The classification of 'big-block' or 'small-block' refers to the engine's external dimensions and does not necessarily indicate

710-544: A 2.5 L (153 cu in) V8 engine. BMW's first V8 engine was the 1954–1965 BMW OHV V8 engine , a petrol engine with overhead valves and all-aluminum construction. The company resumed production of V8 engines in 1992 with the BMW M60 aluminum double overhead camshaft engine, and V8 engines have remained in production until today. BMW's first turbocharged V8 engine was the 1998–2009 M67 twin-turbocharged diesel engine. The first turbocharged V8 petrol engine from BMW

852-674: A 2.7-litre V6 or 3.0-litre V6 Turbocharged Direct Injection diesel engines , or a 3.2-litre V6 or 4.2-litre V8 petrol engine . This is a long wheelbase version of the A6 sedan for the Chinese market. The vehicle was unveiled in 2005 at the Shanghai Motor Show . The vehicles went on sale in the middle of 2005. Early models include A6L 2.4, with A6L 2.0 TFSI (170 PS) followed shortly after. A6L 3.0 Quattro (218 PS) and A6L 4.2 Quattro (335 PS) were introduced in 2005. Other models include A6 3.0. The Audi S6 performance variant

994-472: A 3.2-litre V6 and a 4.2-litre V8, and two TDI diesel engines , a 180 PS (132 kW) 2.7 L and a 225 PS (165 kW) (233 only in the US) 3.0 L. The tiptronic gearbox is standard on the 4.2 V8 and the 2.7 TDI, but optional on the 3.2 FSI and 3.0 TDI. The five-mode air suspension can be raised by up to 60 mm (2.36 in) to provide ground clearance of 185 mm (7.28 in) which

1136-525: A 5.6 L (340 cu in) Chrysler LA engine and built on the chassis of a 1950s Chrysler Imperial. The 1934–1938 Tatra 77 rear-engined sedan was initially powered by 3.0 L (183 cu in) petrol V8, which was air-cooled and used an overhead camshaft that operated the valves using a 'walking beam' rocker arrangement. This model line continued until 1999 when the Tatra 700 ended production. Tatra also produced diesel V8 truck engines from

1278-630: A 60-degree V-angle because it was based on a V6 engine with a 60-degree V-angle. Both the Ford and Volvo engines were used in transverse engine chassis, which were designed for a front-wheel-drive layout (with an on-demand all-wheel drive system in the case of the Volvos ). To reduce the vibrations caused by the unbalanced 60-degree V-angle, the Volvo engines used a balance shaft and offset split crankpins . The Rolls-Royce Meteorite tank engine also used

1420-560: A 60-degree V-angle, since it was derived from the 60 degree V12 Rolls-Royce Meteor which in turn was based on the Rolls-Royce Merlin V12 engine . Other V-angles have been used occasionally. The Lancia Trikappa , Lancia Dilambda , and Lancia Astura , produced 1922–1939, used narrow angle V8 engines (based on the Lancia V4 engine ) with V-angles of 14–24 degrees. The 1932 Miller four-wheel drive racing cars used

1562-419: A V-angle (the angle between the two banks of cylinders) of 90 degrees. This angle results in good engine balance , which results in low vibrations. However, the downside is the greater width of the engine compared to those that use a smaller V-angle. V8 engines with a 60-degree V-angle were used in the 1996–1999 Ford Taurus SHO , the 2005–2011 Volvo XC90 , and the 2006–2009 Volvo S80 . The Ford engine used

SECTION 10

#1732772027127

1704-570: A V-angle of 90 degrees and was built in displacements of 4.1 L (253 cu in) and 5.0 L (308 cu in), the latter being de-stroked to 5.0 L (304 cu in) in 1985. The Holden V8 engine was used in various models, including the Kingswood, Monaro, Torana, Commodore, and Statesman. Versions tuned for higher performance were sold by Holden Dealer Team and Holden Special Vehicles , including versions stroked to up to 5.7 L (350 cu in). The Holden V8 engine

1846-566: A V6 configuration with a mechanical compressor. Audi 's executive car was previously named the Audi 100 (or Audi 5000 in the United States), and was released in three successive generations ( Audi C1 , Audi C2 and Audi C3 ). In 1994, the latest generation (C4) of the Audi 100 received a facelift and was renamed as the Audi A6 , to fit in with Audi's new alphanumeric nomenclature (as

1988-591: A V8 engine was the 1965 Chrysler Valiant (AP6) , which was available with an American-built 4.5 L (273 cu in) Chrysler engine. The first locally designed V8 Ford was the 1966 Ford Falcon (XR) and the first V8 Holden was the 1968 Holden HK , both using engines supplied by their parent companies in the United States. The first V8 engine to be mass-produced in Australia was the 1969–2000 Holden V8 engine . This cast-iron overhead valve engine used

2130-464: A V8 engine was the 1988 Audi V8 luxury sedan. Its first model to use a V8 diesel engine was the D2 A8 3.3 TDI in 2000. The first V8-engined Alfa Romeo road car was the 1967–1969 Alfa Romeo 33 Stradale mid-engined sports car, of which 18 were produced. This was followed by the 1970–1977 Alfa Romeo Montreal front-engined sports car. The engines for both cars are based on the 90-degree V8 engine from

2272-406: A V8 engine with a V-angle of 45 degrees. The 8-cylinder versions of the 1945 through 1966 EMD 567 diesel locomotive engine also used a V-angle of 45 degrees. Most V8 engines fitted to road cars use a cross-plane crankshaft since this configuration produces less vibration due to the perfect primary balance and secondary balance. The cross-plane crankshaft has the four crank pins (numbered from

2414-457: A century for the first experiments with mobile internal combustion engines to gain traction. Sometime between 1895 and 1898 the Austrian brothers and bicycle producers Franz, Heinrich and Karl Gräf (see Gräf & Stift ) commissioned the technician Josef Kainz to build a voiturette with a one-cylinder De Dion-Bouton engine fitted in the front of the vehicle, powering the front axle . It

2556-562: A cheaper, and even more successful Trumpf Junior model, which sold over 100,000 in August 1939, and in the same year Citroën introduced the very successful Traction Avant models in France, over time selling them in the hundred thousands. Hupmobile made 2 experimental models with front-wheel drive in 1932 and 1934, but neither came into production In the late 1930s, the Cord 810/812 of

2698-426: A final drive ratio of 4.111. Further revisions were made to the suspension, brakes, and wheels. The front brake discs were enlarged to 323 mm (12.7 in) in diameter by 30 mm (1.18 in) thick. Standard wheels were 8Jx17 "Avus" cast aluminium alloy wheels, with an optional 7Jx16 alloy wheel for use with winter tyres was also available. The S6 Plus saloon could reach 100 km/h (62.1 mph) from

2840-456: A flexibly located electronically controlled cooling fan. This configuration was pioneered by Dante Giacosa in the 1964 Autobianchi Primula and popularized with the Fiat 128 . Fiat promoted in its advertising that mechanical features consumed only 20% of the vehicle's volume and that Enzo Ferrari drove a 128 as his personal vehicle. The 1959 Mini used a substantially different arrangement with

2982-441: A massive increase in grip and handling over all but the most expensive cars on the market. It initially used flexing rubber instead of needle rollers at the inboard universal joints of the driveshafts but later changed to needle rollers, and GKN designed constant-velocity joint at each outboard end of the drive shafts to allow for steering movement. The Mini revived the use of front-wheel drive which had been largely abandoned since

SECTION 20

#1732772027127

3124-462: A mix of imported and local parts. A 4.4 L (269 cu in) version of the Rover V8 engine was produced in Australia for the ill-fated 1973–1975 Leyland P76 sedan. The engine had an overhead valve design and was the only all-aluminum engine made in Australia. The 1958–1965 Hongqi CA72 was a luxury car, of which approximately 200 were built for government officials. It was powered by

3266-471: A more powerful transverse engine: accordingly, faster versions featured longitudinally mounted (north–south) engines. Despite these developments, however, by the end of the 1980s, almost all major European and Japanese manufacturers had converged around the Fiat-pioneered system of a transversely mounted engine with an "end-on" transmission with unequal length driveshafts. For example, Renault dropped

3408-785: A motor tricycle that was placed in front to achieve front wheel drive. It also known as the Eureka . By 1899 Victoria Combinations were participating in motoring events such as the 371 km (231 mi) Paris– St Malo race, finishing 23rd overall and second(last) in the class. In October a Victoria Combination won its class in the Paris-Rambouillet-Paris event, covering the 100-kilometre course at 26 km/h (16 mph). In 1900 it completed 240 kilometres (150 mi) non-stop at 29 km/h (18 mph). When production ceased in mid-1901, over 400 units had been sold for 3,000 Francs (circa $ 600) each. A different concept

3550-530: A new six-speed tiptronic automatic transmission model 0AW available in the four-wheel-drive models. Audi's "trademark" Torsen -based Quattro permanent four-wheel-drive is available in most of the lineup, and standard in the most powerful models. Quattro is not available on the Multitronic variants of the A6, but is available on the manual and Tiptronic gear systems. Conversely, the Tiptronic system

3692-530: A saloon variant was later added; the saloon version being the only version available to the North American market. The RS 6 saloon finished first in a May 2003 Car and Driver comparison test against the BMW M5 (E39) , Mercedes-Benz E 55 AMG (W210), and Jaguar S-Type R. Audi's C5 series A6 Avant formed the basis for a semi-offroad model in 1999, labeled "Audi allroad quattro". Compared to the regular A6,

3834-478: A single overhead camshaft and was rear-mounted in the vehicles. The company's first V8 road car was the 1973–1974 Dino 308 GT4 mid-engined sports car. The engine is a 90-degree all-aluminum V8 with double overhead camshafts. In 1975, the 2.0 L (122 cu in) engine in the Ferrari 208 GT4 became the smallest production V8 engine ever produced. The model lineage of mid-engined V8 road cars continues to

3976-434: A sporty driving experience, much like that of the conventional A6 with the sports suspension. Audi's 2.7-litre, biturbo V6 petrol engine with 250 PS (184 kW; 247 hp) and 350 N⋅m (258 lb⋅ft) of peak torque was available initially, alongside the 2.5-litre TDI diesel unit with 132 kW (177 hp) and 370 N⋅m (273 lb⋅ft) of torque. A variant of the corporate 4.2-litre V8 petrol engine,

4118-633: A standstill in 5.6 seconds, with the Avant a tenth of a second slower at 5.7 seconds. In February 1997, the introduction of a new A6 ( Typ 4B ), based on a new design automobile platform – the Volkswagen Group C5 platform , with a new range of engines was announced and appeared in March at the 1997 Geneva Motor Show . This A6 was marketed in the same categories as the BMW 5 Series and

4260-654: A strict ruleset to follow until the 1972 season, when engines were no longer allowed to be any bigger than 358 cu in (5.9 L) for the purpose of reducing speeds caused by the rapid aerodynamic advancements from 1969 to 1971. In the American Top Fuel class of drag racing, V8 engines displacing 500 cu in (8 L) today produce outputs of over 7,000 kW (10,000 hp). and 10,000 N⋅m (7,400 lb⋅ft). The engines used in Top Fuel and Funny car drag racing are typically based on

4402-576: A transverse-mounted engine behind the front axle. This design would continue for 3 decades in Germany. Buckminster Fuller adopted rear-engine, front-wheel drive for his three Dymaxion Car prototypes. Other German car producers followed: Stoewer offered a car with front-wheel drive in 1931, Adler in 1932 and Audi in 1933. Versions of the Adler Trumpf sold five-figure numbers from 1932 to 1938, totalling over 25,600 units. In 1934, Adler added

Audi A6 - Misplaced Pages Continue

4544-758: A transversely installed engine was the Suzuki Suzulight , which was a small "city" car, called a kei car in Japanese. In 1955, the Polish producer FSO in Warsaw introduced the front-wheel-driven Syrena of its own design. In 1959 Austin Mini was launched by the British Motor Corporation , designed by Alec Issigonis as a response to the first oil crisis, the 1956 Suez Crisis , and

4686-424: Is a form of engine and transmission layout used in motor vehicles, in which the engine drives the front wheels only. Most modern front-wheel-drive vehicles feature a transverse engine , rather than the conventional longitudinal engine arrangement generally found in rear-wheel-drive and four-wheel-drive vehicles. By far the most common layout for a front-wheel-drive car is with the engine and transmission at

4828-581: Is an eight- cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration . The first known V8 was the Antoinette , designed by Léon Levavasseur , and built in 1904 by the French Antoinette company for use in speedboat racing, cars, and later, airplanes. Also in 1904, V8 engines began small-scale production by Renault and Buchet for use in race cars. Most engines use

4970-586: Is better than the older four-mode. The car featured a number of off-road styling cues including larger bumpers and sills. In some European markets, this A6 allroad quattro was more expensive than the larger Audi Q7 , but an air suspension is an expensive option in the Q7. In its native country, Germany, it cost a few hundred Euros less than the Q7. In 2005, the A6 won the World Car of the Year award, and has also won

5112-738: Is commonly referred to as the Ur-S6 , derived from the German augmentative, " Ur sprünglich" (meaning: original). It was available as both a saloon/sedan ( type 4A5), and an "Avant" ( type 4A9) ( estate/wagon ) to European and United States customers, but only as a saloon in Canada, Asia and Australia. From its launch in late 1994, the Audi S6 was powered by a 2,226 cubic centimetres (135.8 cu in) turbocharged inline five-cylinder petrol engine (parts code prefix: 034, identification code: AAN) with

5254-409: Is considered to be the first V8 engine produced in significant quantities. The 1914 Cadillac L-head V8 engine is considered the first road-going V8 engine to be mass-produced in significant quantities, with 13,000 sold the first year. This engine was built in the United States and was greatly assisted by Cadillac's pioneering use of electric starter motors . The popularity of V8 engines in cars

5396-491: Is near the centre of the car, making the main component of its moment of inertia relatively low). Another result of this design is a lengthened chassis. Except for Citroën, after the 1930s, front-wheel drive would largely be abandoned for the following twenty years. Save the interruption of World War II , Citroën built some 3 ⁄ 4 million Traction Avants through 1957; adding their cheap 2CV people's car in 1948, and introducing an equally front-wheel driven successor for

5538-476: Is not available on the front-wheel-drive variants of the car. The six-speed manual gearbox is available with the 3.2-litre V6 engine , but not for the North American market. The Avant was previewed by the Audi Avantissimo concept in 2001 and arrived during the course of 2005. The A6 All-road Quattro made its debut in 2006, and as before, is an off-road-ready version of the Avant, available with either

5680-421: Is possibly the world's first front-wheel-drive automobile, but it never saw series production, with just one prototype made. In 1898, Latil , in France, devised a front-wheel-drive system for motorising horse-drawn carts. In 1899 the inventor Henry Sutton designed and built one of Australia's first cars, called The Sutton Autocar. This car may have been the first front-wheel-drive car in the world. Henry's car

5822-440: The 1962 , 1963 , 1964 , and 1965 seasons were won by drivers of V8-powered cars. From 1962 through 1965, the top three manufacturers in each season's Constructor's Championship all predominantly used V8 engines in their cars. In 1966, the engine capacity limits were increased to 3.0 L (183 cu in) (or 1.5 litres with a supercharger), and both the 1966 and 1967 Constructor's Championships were won by cars powered by

Audi A6 - Misplaced Pages Continue

5964-559: The Alfa Romeo Tipo 33 racing car, and have double overhead camshafts and a dry sump. The 33 Stradale engine has a displacement of 2.00 L (122 cu in) and a flat-plane crankshaft, while the Montreal uses an engine enlarged to 2.6 L (160 cu in) and uses a cross-plane crankshaft. The 2007–2010 Alfa Romeo 8C Competizione / Spider sports cars are powered by a 4.7 L (290 cu in) version of

6106-632: The Australian Ford Falcon and Ford Fairlane models. It was also used in several low-volume DeTomaso sports cars and luxury sedans built in Italy. Australian production ceased in 1982 when Ford Australia temporarily stopped production of V8 cars. From 1991 until 2016, the Ford Falcon was available with the imported Ford Windsor , Ford Barra , or Ford Modular V8 engines; the latter was marketed as "Boss" and locally assembled from

6248-772: The Brabham-Repco V8 engine . From 1968 until 1981, the Cosworth DFV V8 engine dominated Formula One racing. During this time, the Manufacturers' Championship was won by Cosworth DFV-powered cars every season except 1975, 1976, 1977, and 1979, which 12-cylinder Ferraris won. After a long period of dominance, the Cosworth DFV was eventually outpaced by turbocharged straight-four and V6 engines. The next period of significant V8 usage in Formula One

6390-475: The British Motor Corporation – moved over to the industry-standard solution for the Austin Maestro in 1983, and all its subsequent front-wheel-drive models. By reducing drivetrain weight and space needs, vehicles could be made smaller and more efficient without sacrificing acceleration. Integrating the powertrain with a transverse as opposed to a longitudinal layout, along with unibody construction and

6532-612: The Cadillac lineup) back to rear-wheel drive. There were relatively few rear-wheel-drive cars marketed in North America by the early 1990s; Chrysler 's car line-up was entirely front-wheel drive by 1990. GM followed suit in 1996 where its B-body line was phased out, where its sports cars (Camaro, Firebird, Corvette) were the only RWDs marketed; by the early 2000s, the Chevrolet Corvette and Cadillac Catera were

6674-492: The Douvrin engines used in the larger Renaults (20, 21, 25 and 30) used this longitudinal "forward" layout. The Saab Saab 99 , launched in 1968, also used a longitudinal engine with a transmission underneath with helical gears. The 1966 Oldsmobile Toronado was the first U.S. front-wheel-drive car since the Cord 810 . It used a longitudinal engine placement for its V8, coupled with an unusual "split" transmission, which turned

6816-569: The Ferrari F136 engine with a cross-plane crankshaft. Ferrari's first contact with V8 engines was the Vittorio Jano -designed 1955 Lancia-Ferrari D50 , a Formula One racing car that the company acquired as part of its purchase of Lancia's Formula One racing department. The first Ferrari-developed V8 engines were used in the 1962 Ferrari 248 SP and Ferrari 268 SP sports prototype racing cars designed by Carlo Chiti . This engine had

6958-578: The Fiat 128 featured a transverse-mounted engine with unequal-length drive shafts and an innovative clutch release mechanism – an arrangement which Fiat had strategically tested on a previous production model, the Primula , from its less market-critical subsidiary, Autobianchi . Ready for production in 1964, the Primula featured a gear train offset from the differential and final drive with unequal length drive shafts . The layout enabled

7100-617: The Great Depression , by 1932 the Cord L-29 was discontinued, with just 4,400 sold. The 1929 Ruxton sold just 200 cars built that year. The first successful consumer application came in 1929. The BSA (Birmingham Small Arms Company) produced the unique front-wheel-drive BSA three-wheeler. Production continued until 1936 during which time sports and touring models were available. In 1931 the DKW F1 from Germany made its debut, with

7242-661: The Hewitt Touring Car became the first car built in the United States with a V8 engine. The engine was designed and built by Edward R. Hewitt who emphasized the V8's superiority to the typical I4 and I6 and six-cylinder engines of the time because of its lower weight and easier to make crankshaft compared to the I6s of equal power as well as the V8 not taking much more space than a I4. The 1910 De Dion-Bouton — built in France—

SECTION 50

#1732772027127

7384-471: The Mercedes-Benz E-Class . The redesigned body had a coefficient of drag of 0.28. In 2000 and 2001, the "C5" A6 was on Car and Driver magazine's Ten Best list. This A6 was available with 30-valve 2.4- and 2.8-litre V6 engines , with numerous other engine configurations available globally. As an alternative to the manual transmission , a five-speed tiptronic automatic transmission

7526-653: The Practical Caravan "Towcar of the Year" awards, due to its array of towing features such as adjustable suspension height and damping, and the presence of a 123 Trailer Stability Programme . Audi unveiled a facelifted "C6" Audi A6 on 12 August 2008, at the Moscow International Motor Show . The refresh incorporates some modern Audi design cues to keep the A6 current with the rest of the Audi lineup. There are minor cosmetic changes to

7668-620: The Prince Motor Company also developed a transmission-in-sump type layout for its first front wheel drive model, which after the company's takeover by Nissan , emerged as the Datsun 100A (Cherry) in 1971. In 1960 Lancia could evolve the project CemsaF11 of Antonio Fessia with the innovative Lancia Flavia for first time with motor Boxer on auxiliary frame for low centre of gravity. This scheme continued in Lancia until 1984 with

7810-458: The Taunus   P4 . The 1965 Triumph 1300 was designed for a longitudinal engine with the transmission underneath. Audi has also used a longitudinally mounted engine overhung over the front wheels since the 1970s. Audi is one of the few manufacturers which still uses this particular configuration. It allows the use of equal-length half shafts and the easy addition of all-wheel drive , but has

7952-839: The Tracta constant-velocity joint in 1926. In October 1928 a sensation at the 22nd Paris Motor Show was the Bucciali TAV-6. Six years before the appearance of the Citroën Traction Avant and more than two years before the launch of the DKW F1, the Bucciali TAV-6 featured front-wheel drive. Both German makers DKW in 1931 and Adler in 1933 bought Tracta licenses for their first front-wheel-drive cars. Imperia in Belgium and Rosengart in France manufactured

8094-526: The 1915 Cadillac engine. A flat-plane crankshaft is used by many V8 engines fitted to racing cars. From the gas dynamics aspect, the flat-plane crankshaft allows for even exhaust gas pulses to be achieved with a simple exhaust system. The design was popularized in motor racing by the 1961–1965 Coventry Climax FWMV Formula One engine, and the 1967–1985 Cosworth DFV engine was highly successful in Formula One. Several production sports cars have used flat-plane V8 engines, such as every Ferrari V8 model (from

8236-443: The 1930s. The transversely mounted engine combined with front-wheel drive was popularized by the 1959 Mini ; there the transmission was built into the sump of the engine, and drive was transferred to it via a set of primary gears . Another variant transmission concept was used by Simca in the 1960s keeping the engine and transmission in line, but transverse mounted and with unequal length driveshafts. This has proven itself to be

8378-653: The 1939 Tatra 81 to the present day Tatra 815 . French manufacturers were pioneering in their use of V8 engines in the early 1900s with the 1904 Antoinette aircraft engine (the first known V8 engine) and the 1910 De Dion-Bouton . However, there were few French automotive V8 engines in the following decades, with manufacturers such as Delage , Delahaye , Talbot-Lago , Bugatti , and Hotchkiss using six-cylinder or straight-eight engines instead. From 1935 until 1954, Matford (Ford's French subsidiary, later renamed to ' Ford SAF ') produced cars with V8 engines, closely based on contemporary American Ford models. Simca purchased

8520-544: The 1948 Saab 92 . In 1946, English car company Lloyd cars produced the Lloyd 650 , a front-wheel-drive roadster. The two-stroke, two-cylinder motor was mounted transversely in the front and connected to the front wheels through a four-speed synchronised gearbox. The high price and lacklustre performance doomed its production. Only 600 units were produced from 1946 to 1950. In 1946 in Italy, Antonio Fessia created his Cemsa Caproni F11 , with 7 examples produced. His innovation

8662-704: The 1973 Ferrari 308 GT4 to the 2019–present Ferrari F8 Tributo ), the Lotus Esprit V8 , the Porsche 918 Spyder , and the McLaren MP4-12C . The first V8 engine used in a road-going car was the 1905 Rolls-Royce built in the United Kingdom. This model was initially equipped with a 3.5 L (214 cu in) V8 engine. However, only three cars were made before Rolls-Royce reverted to using straight-six engines for their cars. In 1907,

SECTION 60

#1732772027127

8804-420: The 1986 Ford Taurus . By the mid-1980s, most formerly rear-wheel-drive Japanese models were front-wheel drive, and by the mid-1990s, most American brands only sold a handful of rear-wheel-drive models. The vast majority of front-wheel-drive vehicles today use a transversely mounted engine with "end-on" mounted transmission, driving the front wheels via driveshafts linked via constant velocity (CV) joints , and

8946-433: The 2.3-litre inline five engine being dropped on most markets. For the diesel engines , an inline four 1.9 Turbocharged Direct Injection (TDI), and the inline five (R5) 2.5 TDI (103 kW (140 PS; 138 bhp)) were available. Until 1997, the A6 came with several different engines, two of them turbodiesel , and most of them available with Audi's Torsen -based quattro permanent four-wheel-drive system. The A6

9088-623: The 2.7-litre "Biturbo" V6 (also found in the B5 platform S4 , 250 PS (180 kW; 250 hp)), and the 4.2-litre 40-valve V8 petrol engine (300 PS (221 kW; 296 hp)); the two higher-spec. engines were only offered with quattro permanent four-wheel drive . The V8 models arrived with significantly altered exterior body panels, with slightly more flared wheel arches (fenders), revised headlamps and grille design (before being introduced in 2002 to all other A6 models), larger wheels (8Jx17-inch), larger brakes and Torsen -based Quattro permanent four-wheel-drive as standard. In 2002,

9230-421: The 2019–present Ferrari F8 Tributo . Five-valve-per-cylinder versions were used from 1994 until 2005 in the Ferrari F355 and Ferrari 360 . Turbocharging was introduced on the 1984–1987 Ferrari 288 GTO flagship car, and the range of entry-level mid-engined sports cars switched to turbocharging with the 2015 Ferrari 488 . The Formula One team resumed using V8 engines for the 2006–2013 seasons, beginning with

9372-505: The 32-valve (four valves per cylinder) 4.2-litre V8 engine (parts code prefix: 077, identification code: AHK, later to be seen in the Audi S8 as AKH). Audi's performance division reworked key parts of the engine, increasing the maximum power to 240 kW (326 PS; 322 bhp). It was only available with a revised six-speed manual transmission (parts code prefix: 01E, identification code: DGU) ( gear ratios – 1st: 3.500, 2nd: 1.889, 3rd: 1.320, 4th: 1.034, 5th: 0.857, 6th: 0.730), with

9514-451: The 8.2 L (500 cu in) V8 engine used in the 1971–1978 Cadillac Eldorado and BMW's 3.0 L (183 cu in) M60B30 V8 engine found in cars such as the BMW E34 530i. V8 engines intended for motorsport are often small and short-stroke to maximize RPMs and thus power. The Cosworth DFV 3.0 L (183 cu in) is such an engine. Due to its large external dimensions, V8 engines are typically used in cars that use

9656-417: The A6 received a facelift, with revised headlight and grille design, exposed exhaust tips, and slight changes to accessory body moldings, and tail light colour from red to amber in North American models. A new host of engines were also introduced. The 1.8-litre engine was deleted and replaced by a 2.0-litre powerplant with 96 kW (131 PS; 129 bhp). The 1.9-litre Turbocharged Direct Injection (TDI)

9798-410: The Adler under the licenses using the Tracta CV joints. During the second World War, all British vehicles, U.S. Jeeps made by Ford and Dodge command cars used Tracta CV joints. Russia and Germany also used the Tracta CV joints, but without the licensing. The United States only saw a few limited production experiments like the Cord L-29 of 1929, the first American front-wheel-drive car to be offered to

9940-472: The Audi RS5. The A6's six (per side) front light-emitting diode (LED) daytime running lights (DRLs) are located within the main headlamp housing, similar to RS6's placement of the LEDs (ten per side), whereas on the S6 these front LEDs (five per side) are found adjacent to the fog lamps in the lower front bumper. The new front and rear fascias from RS6 would be used on the facelifted A6 and S6 lineup. There are now six petrol and four diesel engines available for

10082-423: The C4 platform, an even more powerful, and very limited-production Audi S6 Plus was briefly available to European customers. The S6 Plus, developed by Audi's wholly owned high-performance subsidiary, quattro GmbH , was available for sale during the 1997 model year only (production from June 1996 to October 1997). A total of 952 cars were produced; 855 Avants and 97 saloons. It was powered by another version of

10224-484: The C6 series allroad in 2005 and released it the following year. This model was called the Audi A6 allroad quattro (unlike the previous version, the Audi allroad quattro , with no reference to the A6 nomenclature). The Audi A6 allroad quattro again featured adaptive air suspension and quattro permanent four-wheel drive system. The A6 allroad was powered by a choice of two Fuel Stratified Injection (FSI) petrol engines ,

10366-574: The Ford SAF in 1954 and continued to produce various models powered by the Ford Flathead V8 until 1969. After WW2, France imposed very steep tax horsepower charges - the owners of cars with engines above 2 L were financially penalized, so France had a small domestic market for larger-engined cars, such as the V8. Despite this, Facel Vega produced luxury and sports cars powered by Chrysler V8 engines from 1954 through 1964. One of

10508-428: The North American models were equipped with front and rear bumpers that protruded several inches further than their European counterparts, with modified brackets and bumper suspension assemblies as result, and child-seat tethers for occupant safety. In compliance with Canadian law, Canadian models received daytime running lights as standard equipment. North American C5 A6 models received the 2.8-litre, 30-valve V6 engine,

10650-603: The S-cars, and makes the A6 3.0T only 0.1s slower 0-60 mph (97 km/h) than the more powerful but heavier 4.2L V8 variant and 5.2L V10-bearing S6 . Also updated for 2009 is the Quattro all-wheel-drive setup, which is already found on the 2008 Audi A5 and 2008 Audi A4. This new system features a 40/60 front-to-rear torque split and offers a more balanced feel, reducing the understeer that comes from 50/50 AWD platforms. Front-wheel-drive Front-wheel drive ( FWD )

10792-470: The S6, making a 213 kW (290 PS; 286 bhp) version of the 4.2 available as an optional upgrade over the 2.2-litre inline five-cylinder turbo. Unlike the five-cylinder turbocharged version, the V8-powered S6 was supplied with a four-speed automatic transmission as standard but kept the Quattro four-wheel-drive. A six-speed manual gearbox was also available as an option. As a swan song to

10934-834: The Sydney motoring industry and invented a system that used a "spherical radial gear" that was fitted to what is believed to have been a Standard (built by the Standard Motor Company of England). A photo of the car with the system fitted is available from the Mitchell Library and the patent design drawing is still available from the Australian Patent Office. reference; "Gilltraps Australian Cars from 1879 – A history of cars built in Australia" (authors Gilltrap T and M) ISBN 0 85558 936 1 (Golden Press Pty Ltd) The next application of front-wheel drive

11076-520: The TA, the DS model, in 1955. Front-wheel drive continued with the 1948 Citroën 2CV , where the air-cooled lightweight aluminium flat twin engine was mounted ahead of the front wheels, but used Hooke type universal joint driveshaft joints, and 1955 Citroën DS , featuring the mid-engine layout. Panhard of France, DKW of Germany and Saab of Sweden offered exclusively front-wheel-drive cars, starting with

11218-549: The United States managed a bit better than its predecessor one decade earlier. These vehicles featured a layout that places the engine behind the transmission, running "backwards," (save for the Cord, which drove the transmission from the front of the engine). The basic front-wheel-drive layout provides sharp turning, and better weight distribution creates "positive handling characteristics" due to its low polar inertia and relatively favourable weight distribution. (The heaviest component

11360-557: The United States, and even competed in the 1906 Vanderbilt Cup and the French Grand Prix . In 1912 he began manufacturing a line of wheeled fire engine tractors which used his front-wheel-drive system, but due to lack of sales this venture failed. In Australia in 1915 G.J. Hoskins designed and was granted a patent for his front-wheel-drive system. Based in Burwood NSW Mr Hoskins was a prominent member of

11502-402: The actual engine displacement. Engines with displacements from 6.0 to 6.6 L (366 to 403 cu in) have been classified as both small-block and big-block, depending on the particular manufacturer's range of engines. V8 engines have been used in many forms of motorsport, from Formula One , IndyCar , NASCAR , DTM and V8 Supercars circuit racing, to Top Fuel drag racing. Among

11644-504: The advantage of minimising the wealth of buttons normally found on a dashboard by replacing them with controls that operate multiple devices using the integrated display. On the engines, the new Fuel Stratified Injection (FSI) direct injection technology was introduced. Although the line of engines represents the same progression as the former model, all engines were new. The multitronic continuously variable transmission continues as an alternative for front-wheel-drive models, alongside

11786-409: The allroad featured an advanced air suspension system, allowing for increased ground clearance; larger diameter all-terrain tyres, and flared fenders and bumpers with matte finish, giving it a distinct appearance and more overall flexibility over varying terrain. The allroad's ride height was also increased with 25 mm subframe spacers; and overall frame stiffness increased with reinforced welds on

11928-522: The aluminium-conversion Chrysler 426 Hemi engine and run on highly explosive nitromethane fuel. The world's fastest non-jet-powered (i.e., piston-engine powered) wheeled land vehicle, the Speed Demon, which achieved a speed of 744.072 km/h (462.345 mph) in 2017, is powered by a V8 engine based on the Chevrolet small-block engine design. The first Australian-designed car to use

12070-429: The boom in bubble cars that followed. It was the first production front-wheel-drive car with a watercooled inline four-cylinder engine mounted transversely. This allowed eighty percent of the floor plan for the use of passengers and luggage. The majority of modern cars use this configuration. Its progressive rate rubber sprung independent suspension, low centre of gravity, and wheel at each corner with radial tyres, gave

12212-411: The crankshaft can be machined from a flat billet and does not require counterweights so it is lighter. However, it produces more vibration due to a secondary imbalance. Most early V8 road car engines also used a flat-plane crankshaft since this was simpler to design and build than a cross-plane crankshaft. Early flat-plane V8 engines included the 1910 De Dion-Bouton engine, the 1915 Peerless engine, and

12354-442: The disadvantage that it makes it difficult to achieve 50/50 weight distribution (although they remedy this in four-wheel-drive models by mounting the gearbox at the rear of the transaxle ). The Subaru 1000 appeared in 1966 using front-wheel drive mated to a flat-4 engine, with the driveshafts of equal length extending from the transmission, which addressed some of the issues of the powertrain being somewhat complex and unbalanced in

12496-557: The end production of Lancia Gamma and successfully cloned until today by Subaru . Lancia, however also made front-wheel drive its flagship even in sport cars as the winner of the Rally, Lancia Fulvia , and then with large-scale models with excellent road qualities and performances including Lancia Beta , Lancia Delta , Lancia Thema including the powerful Lancia Thema 8.32 with engine Ferrari and all subsequent models. Ford introduced front-wheel drive to its European customers in 1962 with

12638-439: The engine and gearbox to be located side by side without sharing lubricating fluid while orienting the cooling fan toward fresh air flow. By using the Primula as a test-bed, Fiat was able to sufficiently resolve the layout's disadvantages, including uneven side-to-side power transmission, uneven tire wear and potential torque steer , the tendency for the power of the engine alone to steer the car under heavy acceleration. The problem

12780-807: The engine compartment – the Alfa Romeo Alfasud (and its replacement, the 1983 Alfa 33 as well as the Alfa 145/146 up to the late 1990s) also used the same layout. Honda also introduced several small front-wheel drive vehicles, with the N360 and N600 , the Z360 and Z600 in 1967, the Honda 1300 in 1969, followed by the Honda Civic in 1972 and the Honda Accord in 1976. Also in the 1970s and 1980s,

12922-412: The engine driving the front wheels through an offset final drive and unequal-length driveshafts, combined with MacPherson struts and an independently located radiator – subsequently became common with competitors and arguably an industry standard. The Corporate Average Fuel Economy standard drove a mass changeover of cars in the U.S. to front-wheel drive. The change began in 1978, with

13064-517: The engine power 180 degrees. Power then went to a differential mounted to the transmission case, from which half-shafts took it to the wheels. The driveline was set fairly at centre-point of the wheels for better weight distribution, though this raised the engine, requiring lowered intake systems. Little known outside of Italy, the Primula is today primarily known for innovating the modern economy-car layout. – Hemmings Motor News , August 2011 Front-wheel-drive layout had been highly impacted by

13206-533: The engine. The layout often required the engine be removed to service the clutch. This Active Tourer MPV wants to be more stable than a BMW M3, and using the Dante Giacosa-pattern front-wheel-drive layout compacts the mechanicals and saves space for people in the reduced overall length of what will surely become a production 1-series tall-sedan crossover. – Robert Cumberford , Automobile Magazine , March 2013 As engineered by Dante Giacosa ,

13348-460: The first German V8 engines was the 1928–1945 Argus As 10 aircraft engine. This engine was air-cooled, used an 'inverted V' design, and was used in several training, surveillance, and communications airplanes. From 1933 until 1940, the Horch 830 luxury cars were powered by V8 engines (sold alongside Horch's larger straight-eight engines). Shortly after, the 1934–1937 Stoewer Greif V8 was powered by

13490-399: The first V8 Formula One cars to compete were the 1952 AFM entry and the 1954 Lancia D50 , with a development of the latter powering Juan Manuel Fangio's 1956 car to victory in the driver's championship. The 1.5 L Formula One era of 1961–1965 included V8 engines from Ferrari, Coventry Climax, British Racing Motors (BRM), and Automobili Turismo e Sport (ATS). The driver's championships for

13632-413: The first time, making this model the first stretched German sedan developed especially for that country. The Audi S6 was a high-powered variant of the A6, featuring a modified version of the 4.2-litre V8 engine producing 250 kW (340 PS; 335 bhp) and 420 N⋅m (310 lb⋅ft). It was available as a saloon and Avant although the Avant version was the only one sold in North America. In

13774-404: The front and rear lights which now have daytime running LEDs , the taillights extend towards the center of the trunk lid and pinch off at the license plate mount, however, their shape remains rectangular compared to the more sculpted light clusters found in the 2008 Audi A5, 2008 Audi A4, and 2009 Audi Q5 (the latter three being all-new generations). The intakes below the headlamps are inspired by

13916-402: The front axles of almost every four-wheel or all-wheel drive vehicle. Neither automobile was particularly successful in the open market. In spite of the Cord's hallmark innovation, using CV joints, and being competitively priced against contemporaneous alternatives, the buyers demographic were expecting more than the car's 80 mph (130 km/h) top speed, and combined with the effect of

14058-478: The front lights to the rear lights just below the body shoulders. The C6 iteration of the A6 features more sophisticated technology. Most notable is the Multi Media Interface (MMI), which is a system controlling in-car entertainment, satellite navigation, climate control, car settings such as suspension configuration and optional electronic accessories through a central screen interface. This has

14200-468: The front of the car, mounted transversely. Other layouts of front-wheel drive that have been occasionally produced are a front-engine mounted longitudinally, a mid-engine layout and a rear-engine layout. Experiments with front-wheel-drive cars date to the early days of the automobile. The world's first self-propelled vehicle, Nicolas-Joseph Cugnot 's 1769/1770 "fardier à vapeur" , was a front-wheel-driven three-wheeled steam-tractor. It then took at least

14342-523: The front) at angles of 0, 90, 270, and 180 degrees, which results in a cross shape for the crankshaft when it is viewed from one end. The rumbling exhaust sound produced by a typical cross-plane V8 engine is partly due to the uneven firing order within each of the two banks of four cylinders. A usual firing order of L-R-L-L-R-L-R-R (or R-L-R-R-L-R-L-L) results in uneven intake and exhaust pulse spacing for each bank. When separate exhaust systems are used for each bank of cylinders, this uneven pulsing results in

14484-543: The full-size A8 had just been introduced). The exterior was changed only slightly from the "C4" Audi 100 – new front and rear lights, new radiator grille, similarly with chassis and engine and transmission choices. The United Kingdom was the first market to receive the A6, as stock of RHD Audi 100s had run out before expected, and before the rest of mainland Europe. The new engines for the A6 were 1.8-litre 20v inline four-cylinder , 2.0-litre 8v inline four-cylinder , 2.6-litre 12V V6 and 2.8-litre 30v V6 petrol engines, with

14626-549: The introduction of the first American-built transverse-engined cars, the Plymouth Horizon and Dodge Omni (based on the European designed Simca Horizon ), followed by the 1980 Chevrolet Citation and numerous other vehicles. Meanwhile, European car makers, that had moved to front-wheel drive decades before, began to homogenize their engine arrangement only in this decade, leaving Saab , Audi (and Volkswagen ) as

14768-530: The late years of the A6 C5 design, an ultra-high-performance limited-run Audi RS 6 model was presented. Weighing in excess of 1,840 kg (4,057 lb) and producing 331 kW (450 PS; 444 bhp) and 560 N⋅m (413 lbf⋅ft), the RS 6 was capable of 0-100 km/h (62.1 mph) in 4.5 seconds, and on to 200 km/h (124.3 mph) in under 17 seconds. Initially available as only an Avant,

14910-527: The model on which almost all modern FWD vehicles are now based. Peugeot and Renault on their jointly developed small car engine of the 1970s where the 4-cylinder block was canted over to reduce the overall height of the engine with the transmission mounted on the side of the crankcase in what became popularly known as the "suitcase" arrangement ( PSA X engine ). The tendency of this layout to generate unwanted transmission "whine" has seen it fall out of favour. Also, clutch changes required engine removal. In Japan,

15052-428: The name "Ur-allroad." The ' Ur- ' is used in the German language, as a prefix to signify 'ancient' or 'early ancestor' (e.g., great-grandmother is Urgroßmutter), and is used informally by car enthusiasts worldwide to refer to the original Audi Quattro that was produced from 1980 to 1991 (the "Ur-Quattro"). The use of the term was then extended to the original S4 and S6 models to differentiate them from later models with

15194-632: The only RWD cars offered by General Motors until the introduction of the Sigma platform . After the phaseout of the Ford Panther platform (except for the Mustang), Ford automobiles (including the Transit Connect van) manufactured for the 2012 model year to present are front-wheel drive; its D3 platform (based on a Volvo platform) has optional all-wheel drive. V8 engine A V8 engine

15336-604: The only manufacturers offering a front-drive longitudinal engine layout. Years before this was the most common layout in Europe, with examples like Citroën DS , Renault 12 , Renault 5 , Renault 25 (a Chrysler LH ancestor) Alfa Romeo 33 , Volkswagen Passat , etc. This transition can be exemplified in the Renault 21 that was offered with disparate engine configurations. The 1.7-litre version featured an "east–west" (transversely) mounted engine, but Renault had no gearbox suitable for

15478-963: The pre-war DKW F8 and F9 reappeared as the IFA F8 and IFA F9 in 1949, followed by the AWZ P70 in 1955, the Wartburg 311 in 1956 and the Trabant in 1958, all with front-wheel drive. The P70 and Trabant had Duroplast bodies, and the Trabant had both a monocoque body and a transversely mounted engine, a modern design in some ways. In 1950 West German makers also reintroduced front-wheel-drive cars: DKW had lost its production facilities in Eisenach (now in DDR) and reestablished itself in Ingolstadt. A version of

15620-570: The pre-war F9 was introduced as the DKW F89. Borgward introduced 2 new makes with front-wheel drive, the Goliath and the Lloyd in 1950. Gutbrod also came with a car in 1950; the Superior, but withdrew the car in 1954 and concentrated on other products. This car is best remembered for its Bosch fuel-injection . In 1955, one of the first Japanese manufacturers to utilize front-wheel drive with

15762-725: The public, and a few months later the Ruxton automobile . The Cord L-29's drive system was again inspired by racing, copying from the Indianapolis 500 -dominating racers, using the same de Dion layout and inboard brakes. Moreover, the Auburn (Indiana) built Cord was the first ever front-wheel drive production car to use constant-velocity joints . These very specific components allow motive power to be delivered to steered wheels more seamlessly than universal joints , and have become common on almost every front-wheel-drive car, including on

15904-693: The rumbling sound typically associated with V8 engines. However, racing engines seek to avoid these uneven exhaust pressure pulses to maximize the power output. The 1960s cross-plane V8 racing engines used long primary exhaust pipes (such as the Ford GT40 endurance racing car) or located the exhaust ports on the inside of the V-angle (such as the Lotus 38 IndyCar) to link the exhaust systems from each bank and provide even exhaust gas pulses),. A flat-plane crankshaft configuration provides two benefits. Mechanically,

16046-476: The same name, and more recently to the C5 allroad models ("Ur-allroad"). The C5 design was available with the following engines: The Typ 4F A6 was released in 2004. Designed by Satoshi Wada in 2001, this model is visually an evolution of the C5, but was lengthened to 4,927 mm (194.0 in), and has the new Audi "single-frame grille". Like other contemporary Audis, the A6 has a "tornado line" that runs from

16188-520: The same transverse-mounted, forward-motor layout as modern front-wheel-drive automobiles. It even resembled the smaller version of its popular Alfa Romeo Giulia . However, due to the financial difficulties in post-war Italy, the 33 never saw production. Had Alfa-Romeo succeed in producing 33, it would have preceded the Mini as the first "modern" European front-wheel-drive compact car. The German car industry resumed from WW2 in 1949/1950. In East Germany (DDR),

16330-500: The subframe mounts and A, B, and C pillars, the floor pan being produced with 20% thicker steel. As the name "allroad Quattro" suggests, Audi's Torsen -based quattro permanent four-wheel-drive system was standard equipment for all versions. The standard adjustable air suspension system can lift the car high enough to provide 208 mm (8 in) of ground clearance; a low-range mode (an option with manual transmission), absent from other Quattro-equipped vehicles, can be selected with

16472-471: The success of small, inexpensive cars, especially the British Mini . As engineered by Alec Issigonis , the compact arrangement located the transmission and engine sharing a single oil sump – despite disparate lubricating requirements – and had the engine's radiator mounted to the side of the engine, away from the flow of fresh air and drawing heated rather than cool air over

16614-406: The touch of a button. When used together, the two systems made it possible for the allroad to complete an official Land Rover test-course, thus far it is the only car-based SUV that has been proven capable of doing so in testing. Conversely, the air suspension can lower the vehicle down to only 142 mm (6 in) above road level, and simultaneously stiffen the spring and damper rates to provide

16756-473: The transmission in the sump, and the cooling fan drawing hot air from its side-facing location. Volvo Cars has switched its entire lineup after the 900 series to front-wheel drive. Swedish engineers at the company have said that transversely mounted engines allow for more crumple zone area in a head-on collision. American auto manufacturers are now shifting larger models (such as the Chrysler 300 and most of

16898-586: The transmission-in-sump " Suitcase " engine that it had co-developed with Peugeot in the 1970s for its compact models, starting with the Renault 9 in 1982. Peugeot-Citroen themselves also moved over to the end-on gearbox solution when it phased out the Suitcase unit in favour of the TU-series engine in 1986. Nissan also abandoned the transmission-in-sump concept for its N12-series Cherry/Pulsar in 1982. Perhaps symbolically, British Leyland themselves, heirs to

17040-513: The upgraded A6. All petrol engines now feature cylinder-direct Fuel Stratified Injection (FSI) technology, and all diesel engines now feature common rail (CR) and Turbocharged Direct Injection (TDI) technologies. There is a new petrol engine, a 300 PS (221 kW; 296 bhp) 3.0L supercharged V6, badged as 3.0 TFSI or 3.0T. This new engine is shared with the B8-generation Audi S4 and S5 , although slightly detuned vs.

17182-473: The use of constant velocity jointed drive axles, along with front wheel drive has evolved into the modern-day mass-market automobile. Some suggest that the introduction of the modern Volkswagen Golf in 1974, from a traditional U.S. competitor, and the introduction of the 1973 Honda Civic , and the 1976 Honda Accord served as a wake-up call for the "Big Three" (only Chrysler already produced front-wheel-drive vehicles in their operations outside North America). GM

17324-581: Was also available. The C5 saloon variant arrived in mid-1997 in Europe, late 1997 in North America and Australia, and the Avant in 1998. In Canada, there was no Avant (Audi's name for an estate/wagon ) available at all in 1998 – Audi dropped the C4 Avant at the end of the 1997 model year , and jumped straight to the C5 Avant in 1998 in conjunction with its release in the US. As a result of complying with FMVSS ,

17466-627: Was also used in touring car racing and formed the basis of the Repco-Holden engine used in Formula 5000 racing. In 1999, the Holden V8 engine began to be replaced by the imported General Motors LS1 V8 engine. In 1971, Ford Australia began local production of the Ford 'Cleveland' V8 , an overhead valve cast-iron engine. The engine was produced in displacements of 4.9 L (302 cu in) and 5.8 L (351 cu in) for use in

17608-474: Was available with a standard six-speed manual transmission (five-speed only in North America), and Audi's dynamic Torsen T-1 Quattro permanent four-wheel-drive system. Audi made a high-performance, 4.2-litre V8 engine (parts code prefix: 077, identification code: AEC) with a Bosch KE-Motronic ECU available as an option in the original European S4s, and made the decision to continue to do so with

17750-635: Was available with saloon and Avant bodies. The C4 design was available with the following engines: Upon introducing the C4 series A6, Audi made small revisions to what was previously known as the Audi S4 , renaming it the Audi S6 ; the S4 name would eventually be re-used for a completely different model derived from Audi's smaller Volkswagen Group B platform -based Audi A4 . As this was the first S6 model from Audi, it

17892-493: Was even later with the 1979 Vauxhall Astra / Opel Kadett . Captive imports were the US car makers initial response to the increased demand for economy cars . The popularity of front-wheel drive began to gain momentum, with the 1981 Ford Escort , the 1982 Nissan Sentra , and the 1983 Toyota Corolla . Front-wheel drive became the norm for mid-sized cars starting with the 1982 Chevrolet Celebrity , 1982 Toyota Camry , 1983 Dodge 600 , 1985 Nissan Maxima , 1986 Honda Legend , and

18034-575: Was first used on the Mercedes-Benz M113 engine in 2002 and turbocharging was first used on non-commercial diesel V8 engines in 1999 with the OM628 and on petrol engines with the M278 engine in 2010. Porsche's first road car to use a V8 engine was the 1978 Porsche 928 coupe. Its first to use a V8 diesel engine was the second-generation Cayenne S Diesel in 2014. Audi's first road car to use

18176-496: Was from 2006 to 2013 , when the rules mandated use of 2.4 L (146 cu in) naturally-aspirated V8 engines, with regular power outputs between 730 and 810 hp (in order to reduce the power outputs being achieved by the previous 3.0 litre V10 engines). These were replaced by 1.6 litre turbocharged V6 engines for the 2014 and later seasons. V8 engines have dominated American premier stock car racing NASCAR series since its inaugural 1949 season . However, there wasn't

18318-488: Was held at the Indianapolis Motor Speedway on Saturday, 30 May 1925. However, the idea of front-wheel drive languished outside the motor racing arena as few manufacturers attempted the same for production automobiles. Alvis Cars did introduce a commercial model of the front-wheel drive 12/50 racer in 1928, but it was not a success. In France, Jean-Albert Grégoire and Pierre Fenaille developed

18460-470: Was introduced in the Frankfurt Motor Show , and produced from early 2006 until 2011. It is powered by a 5.2-litre Fuel Stratified Injection (FSI) V10 engine producing 320 kW (435 PS; 429 bhp) and 540 N⋅m (398 lbf⋅ft) of torque. The S6 reaches 100 km/h (62.1 mph) from a standstill in 5.2 seconds and a quarter mile in 13.5 seconds. Audi announced

18602-486: Was largely solved by making the shorter driveshaft solid, and the longer one hollow, to ensure both shafts experienced elastic twist which was roughly the same. After the 128, Fiat further demonstrated the layout's flexibility, re-configurating the 128 drive train as a mid-engined layout for the Fiat X1/9 . The compact, efficient Giacosa layout – a transversely-mounted engine with transmission mounted beside

18744-536: Was made available in 2003, and a less powerful TDI (163 bhp) followed in 2004. Audi stopped production of the allroad in July 2005. Although the model continued to be available for sale throughout 2006 in Europe, there was no 2006 model year for North America. With the return of the "allroad" nameplate to North America, in the form of the 2013 A4 allroad Quattro, the C5-Platform allroad Quattro has begun to take

18886-507: Was on Car and Driver magazine's Ten Best list for 2000 and 2001. The updated 2005 A6 won the World Car of the Year award for 2005. In addition, the facelifted third-generation A6 3.0T won two Car and Driver "comparos" that pitted it against other sedans like the BMW 5 Series, Mercedes-Benz E-Class, Jaguar XF, and Infiniti M. A long wheelbase version of the A6 C5 was available in China for

19028-746: Was reported in the English press at the time and featured in the English magazine Autocar , after which the car was named. Two prototypes of the Autocar were built and the Austral Otis Company was going to go into business with Henry to manufacture Henry's car but the cost of the car was too prohibitive as it could not compete with the cost of imported cars. In 1898–99, the French manufacturer Société Parisienne patented their front-wheel-drive articulated vehicle concept which they manufactured as

19170-510: Was revised, resulting in 184 kW (250 PS; 247 bhp) and 330 N⋅m (243 lbf⋅ft), controlled by standard quattro system. The V6 diesel was also slightly modified resulting in 120 kW (163 PS; 161 bhp) (after the second modification) and 350 N⋅m (258 lbf⋅ft). A new more powerful V6 diesel was also introduced with 132 kW (179 PS; 177 bhp) and 370 N⋅m (273 lbf⋅ft). The 4.2-litre V8 engine which arrived in 2001 remained unchanged. Also new

19312-466: Was significantly increased following the 1932 introduction of the Ford Flathead V8 . By the early 21st century, the use of V8 engines in passenger vehicles declined as automobile manufacturers opted for more fuel efficient , lower capacity engines, or hybrid and electric drivetrains . The displacement of modern V8 engines is typically from 3.5 to 6.4 L (214 to 391 cu in). However, larger and smaller examples have been produced, such as

19454-642: Was the Lohner–Porsche of 1897 with an electric motor in each front wheel, produced by Lohner-Werke in Vienna. It was developed by Ferdinand Porsche in 1897 based on a concept developed by American inventor Wellington Adams . Porsche also raced it in 1897. J. Walter Christie of the United States patented a design for a front-wheel-drive car, the first prototype of which he built in 1904. He promoted and demonstrated several such vehicles, notably with transversely mounted engines, by racing at various speedways in

19596-432: Was the multitronic continuously variable transmission , available in most front-wheel drive models. All models, except the 2.0-litre petrol and 1.9-litre TDI, were available with Audi's trademark four-wheel-drive system, Quattro. A four-wheel-drive version of the Avant, with raised ground clearance and slightly altered styling, was sold as the Audi allroad quattro , Audi's first crossover SUV . The second-generation A6

19738-496: Was the 2008–present BMW N63 engine. Their first eight-cylinder engine since passenger car and motorsport straight-eight engine production stopped in 1944 and 1955 respectively, Mercedes-Benz began production of the Mercedes-Benz M100 petrol V8 engine in 1963 and has continued production of V8 engines to the present day. The M100 had a single overhead camshaft, a cast-iron block, and an aluminium head. Supercharging

19880-605: Was the supercharged Alvis 12/50 racing car designed by George Thomas Smith-Clarke and William M. Dunn of Alvis Cars of the United Kingdom. This vehicle was entered in the 1925 Kop Hill Climb in Princes Risborough in Buckinghamshire on 28 March 1925. Harry Arminius Miller of Menomonie, Wisconsin designed the Miller 122 front-wheel drive race-car that was entered in the 1925 Indianapolis 500 , which

20022-401: Was to create the happy combination of a low centre of gravity boxer engine (flat four) with a special frame. Due to post-war financial problems Cemsa could not continue production, but the project was resumed when taken on by Lancia in the 50s. In 1954, Alfa-Romeo had experimented with its first front-wheel-drive compact car named "33" (not related to the sports car similarly named "33"). It had

20164-464: Was tweaked to produce a maximum power output of 96 kW (131 PS; 129 bhp), and 310 N⋅m (229 lbf⋅ft) of torque, and was mated to a six-speed manual gearbox . The 2.4-litre V6 was named the BDV 30 valves and gained an extra 5 hp and better balancing, and the 2.8-litre V6 engine was replaced by a 3.0-litre engine with 162 kW (220 PS; 217 bhp). The turbocharged 2.7-litre

#126873