Misplaced Pages

Kanchrapara Railway Workshop

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

22°56′17″N 88°26′38″E  /  22.938°N 88.444°E  / 22.938; 88.444

#614385

129-680: The Kanchrapara Railway Workshop is one of the major workshops of Indian Railways , and is located in the Sealdah division of the Eastern Railway zone . It is divided into two complexes — Loco Complex and Carriage Complex. It caters to the major overhauling of a large product mix of IR, including locomotives ( WAP7 , WAP4 , WAG9 , WAG7 , WAG5 , WAM4 ), ICF Coaches, EMUs, MEMUs, DEMUs, Tower Cars, etc. Its mention can be found in Satyajit Ray 's short story "Patol Babu Superstar", which

258-469: A tender coupled to it. Variations in this general design include electrically powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom during the early 19th century and used for railway transport until the middle of the 20th century. Richard Trevithick built the first steam locomotive known to have hauled

387-660: A (newly identified) Killingworth Billy in 1816. He also constructed The Duke in 1817 for the Kilmarnock and Troon Railway , which was the first steam locomotive to work in Scotland. In 1825, Stephenson built Locomotion No. 1 for the Stockton and Darlington Railway , north-east England, which was the first public steam railway in the world. In 1829, his son Robert built in Newcastle The Rocket , which

516-542: A 20-day strike . The first metro rail was introduced in Calcutta on 24 October 1984. In 1986, computerized ticketing and reservations were introduced. In 1988, the first Shatabdi Express was introduced between New Delhi and Jhansi . Two years later, the first self-printing ticket machine (SPTM) was introduced in Delhi. In 1993, air-conditioned three-tier and sleeper were introduced. In 1995, Chennai MRTS became

645-448: A balance has to be struck between obtaining sufficient draught for combustion whilst giving the exhaust gases and particles sufficient time to be consumed. In the past, a strong draught could lift the fire off the grate, or cause the ejection of unburnt particles of fuel, dirt and pollution for which steam locomotives had an unenviable reputation. Moreover, the pumping action of the exhaust has the counter-effect of exerting back pressure on

774-486: A crankpin on the driving wheel ( Main driver in the US) or to a crank on a driving axle. The movement of the valves in the steam chest is controlled through a set of rods and linkages called the valve gear , actuated from the driving axle or from the crankpin; the valve gear includes devices that allow reversing the engine, adjusting valve travel and the timing of the admission and exhaust events. The cut-off point determines

903-1171: A few sections, intermediate block signalling is provided to further enhance line capacity with minimal investment. As of March 2020, 602 block sections have intermediate block signals. Indian Railways primarily uses coloured signal lights , which replaced the earlier semaphores and disc-based signalling . It uses two-aspect, three-aspect and four (or multiple) aspect color signalling across its network. Signals at most stations are interlocked using panel interlocking , route-relay interlocking or electronic interlocking methods that eliminate scope for human signalling errors. Indian Railways uses track circuiting , and block proving axle counters for train detection. As of March 2023, 6,523 stations have interlocked and multi-aspect signalling. Around 99% of key routes have track circuitry or block proving axle counters for automated train detection and Kavach automatic train protection system has been implemented in 1,445 km (898 mi) of tracks. The railways has about 59,105 km (36,726 mi) of optical fiber cable network used for train control, voice and data communication with 3,445 km (2,141 mi) of

1032-441: A four or five letter code. The locomotives may be Longer Hood Front (LHF), where the driver cabin is behind the hood of the engine or Short Hood Front (SHF), where the cabin is located towards the front. Multiple units (MU) are propelled by locomotives integrated with train-sets. In 2015, the first Compressed Natural Gas (CNG) powered MUs were rolled out by ICF. In 2018, the semi-high speed self-propelled Vande Bharat train-set

1161-429: A gauge mounted in the cab. Steam pressure can be released manually by the driver or fireman. If the pressure reaches the boiler's design working limit, a safety valve opens automatically to reduce the pressure and avoid a catastrophic accident. The exhaust steam from the engine cylinders shoots out of a nozzle pointing up the chimney in the smokebox. The steam entrains or drags the smokebox gases with it which maintains

1290-564: A horse-drawn tramway began operation in Bombay between Colaba and Parel . In 1879, the Nizam's Guaranteed State Railway was established which built railway lines across the then Hyderabad State from Kachiguda . In 1877, an Ajmer built F-1/734 Steam Locomotive became the first indigenously built locomotive in India. In 1897, lighting in passenger coaches was introduced with Jodhpur Railway,

1419-502: A load over a distance at Pen-y-darren in 1804, although he produced an earlier locomotive for trial at Coalbrookdale in 1802. Salamanca , built in 1812 by Matthew Murray for the Middleton Railway , was the first commercially successful steam locomotive. Locomotion No. 1 , built by George Stephenson and his son Robert's company Robert Stephenson and Company , was the first steam locomotive to haul passengers on

SECTION 10

#1732786865615

1548-508: A long-term effort, Project Unigauge , aims to convert most of these to broad gauge. As of 31 March 2023 , 65,978 km (40,997 mi) or 96.20% of the network was broad-gauge, 1,345 km (836 mi) or 1.96% metre-gauge and 1,262 km (784 mi) or 1.84% narrow-gauge. The broad-gauge network is equipped with long-welded , high-tensile 52kg/60kg 90 UTS rails with pre-stressed concrete (PSC) sleepers and elastic fastenings. As of July 2020, there are seven major routes

1677-488: A lower pressure in the smokebox than that under the firebox grate. This pressure difference causes air to flow up through the coal bed and keeps the fire burning. The search for thermal efficiency greater than that of a typical fire-tube boiler led engineers, such as Nigel Gresley , to consider the water-tube boiler . Although he tested the concept on the LNER Class W1 , the difficulties during development exceeded

1806-433: A lower reciprocating mass than three, four, five or six coupled axles. They were thus able to turn at very high speeds due to the lower reciprocating mass. A trailing axle was able to support a huge firebox, hence most locomotives with the wheel arrangement of 4-4-2 (American Type Atlantic) were called free steamers and were able to maintain steam pressure regardless of throttle setting. The chassis, or locomotive frame ,

1935-768: A number of manufacturing units , training establishments , PSUs and other undertakings under the purview of the Indian Railways. Staff are classified into gazetted (Groups A and B) and non-gazetted (Groups C and D) employees with gazetted employees carrying out executive/managerial level tasks. As of March 2023, Groups A & B constitute 1.5% of the total workforce, while Group C & D account for 98.5%. 80% of Group-A employees are recruited through Indian Railways Management Service with remaining through promotions. Group B employees are recruited by departmental promotional exams of Group C employees. Recruitment of Group C employees are through exams conducted by

2064-639: A number of Swiss steam shunting locomotives were modified to use electrically heated boilers, consuming around 480 kW of power collected from an overhead line with a pantograph . These locomotives were significantly less efficient than electric ones ; they were used because Switzerland was suffering a coal shortage because of the War, but had access to plentiful hydroelectricity . A number of tourist lines and heritage locomotives in Switzerland, Argentina and Australia have used light diesel-type oil. Water

2193-461: A number of important innovations that included using high-pressure steam which reduced the weight of the engine and increased its efficiency. Trevithick visited the Newcastle area in 1804 and had a ready audience of colliery (coal mine) owners and engineers. The visit was so successful that the colliery railways in north-east England became the leading centre for experimentation and development of

2322-460: A public railway, the Stockton and Darlington Railway , in 1825. Rapid development ensued; in 1830 George Stephenson opened the first public inter-city railway, the Liverpool and Manchester Railway , after the success of Rocket at the 1829 Rainhill Trials had proved that steam locomotives could perform such duties. Robert Stephenson and Company was the pre-eminent builder of steam locomotives in

2451-459: A rigid frame with a 30% weight reduction. Generally, the largest locomotives are permanently coupled to a tender that carries the water and fuel. Often, locomotives working shorter distances do not have a tender and carry the fuel in a bunker, with the water carried in tanks placed next to the boiler. The tanks can be in various configurations, including two tanks alongside ( side tanks or pannier tanks ), one on top ( saddle tank ) or one between

2580-578: A semi-high speed self-propelled train-set capable of reaching speeds of over 160 km/h (99 mph) was rolled out from ICF and the Vande Bharat Express was launched in 2019. Indian Railways announced plans to become a net-zero carbon emission railway by 2030 and has implemented rainwater harvesting at stations, reforestation along the tracks, introduction of solar-powered trains, installation of solar and wind power generation facilities, and sustainable LED lighting at all

2709-527: A single metre gauge line from Chennai Beach to Tambaram . In the period between 1925 and 1944, the management of the railway companies in the British presidencies and provinces were taken over by the Government. In 1950, there were about 42 different railway companies operating about 55,000 km (34,000 mi) tracks across the country. These railway companies were amalgamated in steps to form

SECTION 20

#1732786865615

2838-636: A single entity named as Indian Railways. In December 1950, the Central Advisory Committee for Railways approved the plan for re-organizing Indian Railways into six regional zones with the Southern (14 April 1951), Central (5 November 1951), and Western (5 November 1951) zones being the first to be created. In 1952, fans and lights were mandated for all compartments in passenger trains and sleeping accommodations were introduced in coaches. The first diesel locomotive used in India

2967-401: A tank in the locomotive tender or wrapped around the boiler in the case of a tank locomotive . Periodic stops are required to refill the tanks; an alternative was a scoop installed under the tender that collected water as the train passed over a track pan located between the rails. While the locomotive is producing steam, the amount of water in the boiler is constantly monitored by looking at

3096-575: A ticket holder to board the train and share a berth. Reserved tickets can be booked by passengers who want to travel at short notice at higher fares through the Tatkal train ticket , where no refund is applicable on cancellation. A valid proof for the purchase of ticket along with photo identification is required to board the train. Unreserved tickets for short distance or unplanned travels may be purchased at stations or through UTS mobile app at any time before departure. Holders of such tickets may only board

3225-460: A total length of 11,295 km (7,018 mi) which have been classified as High-Density Network (HDN) routes or Trunk routes. There is 60% traffic on these routes, which are designed for speed limit of 160  km/h . These Trunk route include Chennai–Howrah , Chennai–Mumbai , Delhi–Chennai , Delhi–Howrah , Howrah–Mumbai , Mumbai–Delhi and Delhi–Guwahati. The first electric train ran in Bombay in 1925 on DC traction. In 1928, DC traction

3354-472: Is a part of it and can be used by any officer of Govt. of India for official/private purpose. Apart from Railway Officers' Club, various other institute with sports and cultural facilities have been established by railways. It includes Football ground, Badminton Court, Cultural hall, etc. It is open for public booking. It is used largely for cultural events etc. It is open for public booking. It includes Football ground and auditorium for cultural events. It

3483-471: Is connected to West Bengal with a construction of new rail link connecting Tripura with Akhaura . Two rail links to Nepal exist as of 2021, with a third under construction. There is an existing railink with Pakistan through Attari – Wagah border. Indian Railways uses a range of signalling technologies and methods to manage its train operations based on traffic density and safety requirements. As of March 2023, around 3,549 km (2,205 mi) of

3612-475: Is crucial to the efficiency of any steam locomotive, and the internal profiles of the chimney (or, strictly speaking, the ejector ) require careful design and adjustment. This has been the object of intensive studies by a number of engineers (and often ignored by others, sometimes with catastrophic consequences). The fact that the draught depends on the exhaust pressure means that power delivery and power generation are automatically self-adjusting. Among other things,

3741-419: Is directed upwards out of the locomotive through the chimney, by way of a nozzle called a blastpipe , creating the familiar "chuffing" sound of the steam locomotive. The blastpipe is placed at a strategic point inside the smokebox that is at the same time traversed by the combustion gases drawn through the boiler and grate by the action of the steam blast. The combining of the two streams, steam and exhaust gases,

3870-527: Is divided into 18 administrative zones (17 operational), headed by general managers which are further subdivided into 71 operating divisions , headed by divisional railway managers (DRM). The divisional officers of the respective operating verticals report to the DRMs and divisional heads and are tasked with the operation and maintenance of assets. Station masters control individual stations and train movements through their stations' territory. In addition, there are

3999-629: Is headed by Deputy Chief Material Manager, an Indian Railway Stores Service officer. It is headed by Chief Medical Superintendent. It is headed by Vice Principal (an Assistant Scale officer). Apart from supervisors, it also imparts training to technicians. It is primarily meant for conferences and railway cultural events. It includes sports facilities like Lawn Tennis (turf), Badminton (wooden court), Billiards, swimming pool, etc. for railway employees only. The halls and open spaces are also open for public booking. "ROC/KPA" (Map). Google Maps . Retrieved 8 December 2018 . Officers' Rest House

Kanchrapara Railway Workshop - Misplaced Pages Continue

4128-618: Is open for public booking. Indian Railways Indian Railways is a statutory body under the ownership of the Ministry of Railways of the Government of India that operates India's national railway system. As of 2023 , it manages the fourth largest national railway system by size with a track length of 132,310 km (82,210 mi), running track length of 106,493 km (66,172 mi) and route length of 68,584 km (42,616 mi). As of August 2024 , 96.59% of

4257-415: Is the principal structure onto which the boiler is mounted and which incorporates the various elements of the running gear. The boiler is rigidly mounted on a "saddle" beneath the smokebox and in front of the boiler barrel, but the firebox at the rear is allowed to slide forward and backwards, to allow for expansion when hot. European locomotives usually use "plate frames", where two vertical flat plates form

4386-924: The Drache , was delivered in 1848. The first steam locomotives operating in Italy were the Bayard and the Vesuvio , running on the Napoli-Portici line, in the Kingdom of the Two Sicilies. The first railway line over Swiss territory was the Strasbourg – Basel line opened in 1844. Three years later, in 1847, the first fully Swiss railway line, the Spanisch Brötli Bahn , from Zürich to Baden

4515-591: The Ohio Historical Society Museum in Columbus, US. The authenticity and date of this locomotive is disputed by some experts and a workable steam train would have to await the invention of the high-pressure steam engine by Richard Trevithick , who pioneered the use of steam locomotives. The first full-scale working railway steam locomotive was the 3 ft ( 914 mm ) gauge Coalbrookdale Locomotive built by Trevithick in 1802. It

4644-601: The Railway Recruitment Control Board (RRCB) and Group D staffs are recruited by zonal Railway Recruitment Cells (RRC). Indian Railways operates seven centralized training institutes and 295 training centers. It also provides housing , healthcare and education facilities for staff. Indian Railways has various public sector undertakings (PSUs) and other organisations under its purview: Indian Railways also has multiple bodies and undertakings under its purview such as: The first trains in

4773-515: The 1800s were hauled by imported steam locomotives. In 1877, the first locomotive was built in India. Electric locomotives were introduced in 1925 and diesel locomotives later in 1954. By 1990s, steam locomotives were phased out and are currently operated only on mountrain railways and on heritage trains . Locomotives are classified by track gauge ( broad / metre / narrow / narrower ), motive power (electric/diesel/battery), function (passenger/goods/mixed), power rating (x1000 HP ) and model in

4902-731: The 1960s, Electric multiple units (EMU) were developed for short-haul and suburban rail transit. On regional short-distance routes, Mainline electrical multiple unit (MEMU) and Diesel electrical multiple unit (DEMU) trains are run. These train sets run in formation of 6, 9, 12 or 15 coaches and a three-car set is typified by a motor coaches and two passenger coaches. These train-sets are self-propelled with capability for faster acceleration or deceleration. In 2018, Indian Railways also rolled out semi-high speed self-propelled train sets with modified coaches for inter city trains. Indian Railways hauls variety of cargo to cater to various requirements and have specialized rolling stock corresponding to

5031-409: The Indian Railways and public sector companies BEML and BHEL. The coaching stock have unique five or six digit identifiers. Till 2018, the first two digits indicating the year of manufacture and the last three digits indicating the class. In 2018, the numbering system was changed with the first two digits indicating the year of manufacture and the last four digits indicating the sequence number. In

5160-582: The Saar (today part of Völklingen ), but neither could be returned to working order after being dismantled, moved and reassembled. On 7 December 1835, the Adler ran for the first time between Nuremberg and Fürth on the Bavarian Ludwig Railway . It was the 118th engine from the locomotive works of Robert Stephenson and stood under patent protection. In Russia , the first steam locomotive

5289-423: The US), or screw-reverser (if so equipped), that controls the cut-off, therefore, performs a similar function to a gearshift in an automobile – maximum cut-off, providing maximum tractive effort at the expense of efficiency, is used to pull away from a standing start, whilst a cut-off as low as 10% is used when cruising, providing reduced tractive effort, and therefore lower fuel/water consumption. Exhaust steam

Kanchrapara Railway Workshop - Misplaced Pages Continue

5418-680: The United States, including John Fitch's miniature prototype. A prominent full sized example was Col. John Steven's "steam wagon" which was demonstrated on a loop of track in Hoboken, New Jersey in 1825. Many of the earliest locomotives for commercial use on American railroads were imported from Great Britain, including first the Stourbridge Lion and later the John Bull . However, a domestic locomotive-manufacturing industry

5547-550: The adhesive weight. Equalising beams connecting the ends of leaf springs have often been deemed a complication in Britain, however, locomotives fitted with the beams have usually been less prone to loss of traction due to wheel-slip. Suspension using equalizing levers between driving axles, and between driving axles and trucks, was standard practice on North American locomotives to maintain even wheel loads when operating on uneven track. Locomotives with total adhesion, where all of

5676-402: The boiler materials to the point where it needs to be rebuilt or replaced. Start-up on a large engine may take hours of preliminary heating of the boiler water before sufficient steam is available. Although the boiler is typically placed horizontally, for locomotives designed to work in locations with steep slopes it may be more appropriate to consider a vertical boiler or one mounted such that

5805-404: The boiler remains horizontal but the wheels are inclined to suit the slope of the rails. The steam generated in the boiler fills the space above the water in the partially filled boiler. Its maximum working pressure is limited by spring-loaded safety valves. It is then collected either in a perforated tube fitted above the water level or by a dome that often houses the regulator valve, or throttle,

5934-399: The boiler. Boiler water surrounds the firebox to stop the metal from becoming too hot. This is another area where the gas transfers heat to the water and is called the firebox heating surface. Ash and char collect in the smokebox as the gas gets drawn up the chimney ( stack or smokestack in the US) by the exhaust steam from the cylinders. The pressure in the boiler has to be monitored using

6063-466: The broad-gauge network is electrified . With more than 1.2 million employees, it is the world's ninth-largest employer and India's second largest employer . In 1951, the Indian Railways was established by the amalgamation of 42 different railway companies operating in the country, spanning a total of 55,000 km (34,000 mi). The railway network across the country was reorganized into six regional zones in 1951–52 for administrative purposes, which

6192-453: The cargo hauled. There are 243 types of rolling stock used for cargo operations. These include covered wagons , boxcars , flat wagons , flatbeds , open wagons , hoppers , containers , automobile carriers, defense vehicle carriers and tankers . The freight cars can often carry loads from 10 to 80 tonnes per car depending on the configuration. A new wagon numbering system was adopted in Indian Railways in 2003. The requirement of wagons

6321-488: The country's entire broad gauge rail network by 2023. Post electrification, 30 billion kWh of electricity will be required on an annual basis for Indian Railways. As of 1 August 2024 , Indian Railways has electrified 64,080 km (39,820 mi) or 96.59% of the total broad-gauge route length. Indian Railway uses 25 kV AC traction on all its electrified tracks. India shares land border with multiple countries and have rail-links with some of them. Bangladesh

6450-483: The country. It operates luxury tourist trains such as Maharajas' Express , Palace on Wheels , Golden Chariot and Deccan Odyssey , deluxe tourist trains such as Mahaparinirvan Express . It also operates heritage and exhibition trains on special circumstances. In 1986, computerized ticketing and reservations were introduced before which ticketing was done manually. Self-printing ticket machines (SPTM) were introduced in 1988. Centralized computer reservation system

6579-737: The dominant fuel worldwide in steam locomotives. Railways serving sugar cane farming operations burned bagasse , a byproduct of sugar refining. In the US, the ready availability and low price of oil made it a popular steam locomotive fuel after 1900 for the southwestern railroads, particularly the Southern Pacific. In the Australian state of Victoria, many steam locomotives were converted to heavy oil firing after World War II. German, Russian, Australian and British railways experimented with using coal dust to fire locomotives. During World War 2,

SECTION 50

#1732786865615

6708-762: The entire rail network would be electrified by 2023. In March 2020, Indian Railways announced a nationwide shutdown of passenger service to combat the COVID-19 pandemic in India with the freight operations continuing to transport essential goods. The railways resumed passenger services in a phased manner in May 2020. Starting in the 2010s, various infrastructure modernization projects have been undertaken including high-speed rail , redevelopment of 400 stations, doubling tracks to reduce congestion, refurbishing of coaches, Global Positioning System (GPS)-enabled tracking of trains and modernization of locomotives. In 2018,

6837-431: The exhaust gas volume was vented through a cooling tower, allowing the steam exhaust to draw more air past the radiator. Running gear includes the brake gear, wheel sets , axleboxes , springing and the motion that includes connecting rods and valve gear. The transmission of the power from the pistons to the rails and the behaviour of the locomotive as a vehicle, being able to negotiate curves, points and irregularities in

6966-448: The firebox becomes exposed. Without water on top of the sheet to transfer away the heat of combustion , it softens and fails, letting high-pressure steam into the firebox and the cab. The development of the fusible plug , a temperature-sensitive device, ensured a controlled venting of steam into the firebox to warn the fireman to add water. Scale builds up in the boiler and prevents adequate heat transfer, and corrosion eventually degrades

7095-605: The first metro system and the only system operated by Indian Railways was commissioned. Opened in November 1995, Chennai MRTS became the first operational elevated railway line in India. Indian Railways operates suburban railway systems across the cities of Mumbai (suburban), Chennai (suburban and MRTS), Kolkata (suburban and metro) and Secunderabad (MMTS) covering six railway zones. Indian Railways offers tour packages through IRCTC. It operates tourist trains and coach services on popular tourist circuits in different regions of

7224-581: The first coach manufacturing unit in India. These coaches, manufactured from 1955 to 2018, were largely in use till the early 2010s. From the late 1990s, the ICF coaches were replaced by safer and newer LHB coaches designed by Linke-Hofmann-Busch of Germany . In the late 2010s, Indian railways started upgrading the coaches of select trains from LHB to new Tejas coaches with enhanced features. As of March 2023, Indian Railways' had 84,863 passenger coaches. Coaches are manufactured by five manufacturing units of

7353-568: The first decades of steam for railways in the United Kingdom, the United States, and much of Europe. Towards the end of the steam era, a longstanding British emphasis on speed culminated in a record, still unbroken, of 126 miles per hour (203 kilometres per hour) by LNER Class A4 4468 Mallard , however there are long-standing claims that the Pennsylvania Railroad class S1 achieved speeds upwards of 150 mph, though this

7482-535: The first operational elevated railway line in India. Centralized computer reservation system was deployed in Delhi, Mumbai and Chennai in September 1996, coupon validating machines (CVMs) were introduced at Mumbai CSMT in 1998 and the nationwide concierge system began operation on 18 April 1999. The Indian Railways website went online in February 2000. Indian Railways Catering and Tourism Corporation (IRCTC)

7611-624: The first runs beginning in December 1959 with the WAM-1 locomotives. The first containerized freight rail transport began between Bombay and Ahmedabad in 1966. In 1969, the Government of India announced the introduction of a new express train capable of reaching speeds of up to 120 km/h (75 mph) in the railway budget and the first Rajdhani Express was flagged off from New Delhi to Howrah in March 1969. In 1974, Indian Railways endured

7740-439: The first time in its history. At least 313 people died in 40 train accidents in 2023-24 and 748 people have died in 638 train accidents in the previous ten years. Steam locomotive A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam . It is fuelled by burning combustible material (usually coal , oil or, rarely, wood ) to heat water in

7869-653: The first time with the first train flagged off from Coimbatore in June 2022. Indian Railways is a statutory body under the ownership of the Ministry of Railways of the Government of India . It is headed by a four-member Railway Board whose chairman reports to the Ministry of Railways and act on behalf of the ministry. The organisation is divided into separate verticals traction , engineering , traffic , rolling stock , signalling , materials , personnel , RPF , finance , health and safety . Indian Railways

SECTION 60

#1732786865615

7998-481: The first to introduce electric lighting as standard fixtures. The first railway budget was presented in 1924. On 3 February 1925, the first electric train ran between Bombay and Kurla , hauled by a SLM electric locomotive on DC traction. In 1925, the first Electric Multiple Units (EMU) were introduced in Bombay with 1500 V DC units imported were from Cammell Laird and Uerdingenwagonfabrik . Chennai suburban railway started operating in 1931 with

8127-500: The first trains to reach speeds of up to 120 km/h (75 mph). Shatabdi Express introduced in 1988, are capable of running at a maximum speed of 150 km/h (93 mph). In 2019, Vande Bharat Express was launched with self-propelled EMU train-sets capable of reaching maximum speed of 180 km/h (110 mph) with operational speeds restricted to 130–160 km/h (81–99 mph). A non-airconditioned semi-high speed train-set hauled by two modified WAP-5 locomotives

8256-449: The fleet of other rolling stock is carried out at 212 carriage & wagon repair units and 45 periodic overhaul workshops across various zones of IR. As of 31 March 2023 , Indian railway network spanned 68,584 km (42,616 mi) in route length. With 29,719 km (18,467 mi) of the lines having two or more tracks, total running track length was 106,493 km (66,172 mi), while total trackage (including sidings)

8385-512: The frames ( well tank ). The fuel used depended on what was economically available to the railway. In the UK and other parts of Europe, plentiful supplies of coal made this the obvious choice from the earliest days of the steam engine. Until 1870, the majority of locomotives in the United States burned wood, but as the Eastern forests were cleared, coal gradually became more widely used until it became

8514-437: The freight pricing/product mix. End-to-end integrated transport solutions such as roll-on, roll-off (RORO) service, a road-rail system pioneered by Konkan Railway in 1999 to carry trucks on flatbed trailers is extended to other routes. As per the Ministry of Railways, there have been more than 38,500 railway accidents from 1961 to 2019. In 2019-20, the Indian Railways reported zero passenger deaths due to accidents for

8643-676: The general or unreserved coaches. Suburban networks also issue unreserved tickets valid for a limited time or season passes with unlimited travel between two stops for a period of time. India has some of the lowest train fares in the world, and lower class passenger fares are subsidised. Discounted fares are applicable for railway employees, senior citizens (over age 60), the differently-abled, students, athletes, patients and those taking competitive examinations. Seats of lower class of accommodation are reserved for women or senior citizens in some trains. The first rail operational in Madras in 1837

8772-418: The grate into an ashpan. If oil is used as the fuel, a door is needed for adjusting the air flow, maintaining the firebox, and cleaning the oil jets. The fire-tube boiler has internal tubes connecting the firebox to the smokebox through which the combustion gases flow transferring heat to the water. All the tubes together provide a large contact area, called the tube heating surface, between the gas and water in

8901-582: The highly mineralised water was available, and locomotive boilers were lasting less than a quarter of the time normally expected. In the days of steam locomotion, about half the total train load was water for the engine. The line's operator, Commonwealth Railways , was an early adopter of the diesel-electric locomotive . The fire-tube boiler was standard practice for steam locomotive. Although other types of boiler were evaluated they were not widely used, except for some 1,000 locomotives in Hungary which used

9030-458: The late 1930s. The majority of steam locomotives were retired from regular service by the 1980s, although several continue to run on tourist and heritage lines. The earliest railways employed horses to draw carts along rail tracks . In 1784, William Murdoch , a Scottish inventor, built a small-scale prototype of a steam road locomotive in Birmingham . A full-scale rail steam locomotive

9159-1362: The letter(s) identifying the berth/seat type and numbers identifying the position. In standard coaches, the berths and seats are classified as follows: Saloon coaches are also available for chartering which are equipped with a bedroom and kitchen and can be attached to normal trains. Indian Railways operates various classes of passenger and express trains. The trains are classified basis average speed and facilities with express trains having fewer halts, priority on rail network and faster average speed. The trains are identified by five digit numbers with train-pairs traveling in opposite directions usually labelled with consecutive numbers. Express trains often have specific unique names for easy identification. In 2018–19, Indian Railways operated 13,523 passenger trains on average daily and carried 8.44 billion passengers. India Railways operates various categories of express trains including Rajdhani Express , Shatabdi Express , Garib Rath Express , Double Decker Express , Tejas Express , Gatimaan Express , Humsafar Express , Duronto Express , Yuva Express , Uday Express , Jan Shatabdi Express , Sampark Kranti Express , Vivek Express , Rajya Rani Express , Mahamana Express , Antyodaya Express , Jan Sadharan Express , Suvidha Express and Intercity Express . Rajdhani Express introduced in 1969 were

9288-681: The locomotive ran on a circular track in the factory yard. It was the first locomotive to be built on the European mainland and the first steam-powered passenger service; curious onlookers could ride in the attached coaches for a fee. It is portrayed on a New Year's badge for the Royal Foundry dated 1816. Another locomotive was built using the same system in 1817. They were to be used on pit railways in Königshütte and in Luisenthal on

9417-421: The locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its cylinders in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with the locomotive, either on the locomotive itself or in

9546-403: The main chassis, with a variety of spacers and a buffer beam at each end to form a rigid structure. When inside cylinders are mounted between the frames, the plate frames are a single large casting that forms a major support element. The axleboxes slide up and down to give some sprung suspension, against thickened webs attached to the frame, called "hornblocks". American practice for many years

9675-509: The mainframes. Locomotives with multiple coupled-wheels on a rigid chassis would have unacceptable flange forces on tight curves giving excessive flange and rail wear, track spreading and wheel climb derailments. One solution was to remove or thin the flanges on an axle. More common was to give axles end-play and use lateral motion control with spring or inclined-plane gravity devices. Railroads generally preferred locomotives with fewer axles, to reduce maintenance costs. The number of axles required

9804-403: The minimum essential amenities required by each station. Indian Railways offers various travel classes on its coaches . For the purpose of identification in passenger trains , coaches in a train-set are assigned an alpha-numeric code. The first letter identifies the coach class and the second letter identifies the coach number. The berths and seats are numbered by an alphanumeric code with

9933-470: The moment when the valve blocks a steam port, "cutting off" admission steam and thus determining the proportion of the stroke during which steam is admitted into the cylinder; for example a 50% cut-off admits steam for half the stroke of the piston. The remainder of the stroke is driven by the expansive force of the steam. Careful use of cut-off provides economical use of steam and in turn, reduces fuel and water consumption. The reversing lever ( Johnson bar in

10062-797: The original John Bull was on static display in the National Museum of American History in Washington, D.C. The replica is preserved at the Railroad Museum of Pennsylvania . The first railway service outside the United Kingdom and North America was opened in 1829 in France between Saint-Etienne and Lyon ; it was initially limited to animal traction and converted to steam traction early 1831, using Seguin locomotives . The first steam locomotive in service in Europe outside of France

10191-405: The passenger and fare details along with berth or seat number(s) allocated to them on the ticket. In case of no confirmed reservation, a wait-list number is assigned and wait-listed tickets get confirmed if there are cancellations of already reserved tickets. Reservation against cancellation tickets is an intermediate category between the waiting and confirmed lists in sleeper classes which allows

10320-798: The passenger segment with income from the freight business and prioritized passenger trains on the network. Hence, freight services were unable to complete other modes of transport on both cost and speed of delivery, leading to continuous erosion of market share till the early 2000s. To counter this, Indian Railways established the Dedicated Freight Corridor Corporation of India in 2006 to construct dedicated freight corridors to reduce congestion, increase speed and reliability and proposed upgradation of existing goods sheds, attracting private capital to build multi-commodity multi-modal logistics terminals, changing container sizes, operating time-tabled freight trains and tweaking with

10449-468: The piston in turn. In a two-cylinder locomotive, one cylinder is located on each side of the vehicle. The cranks are set 90° out of phase. During a full rotation of the driving wheel, steam provides four power strokes; each cylinder receives two injections of steam per revolution. The first stroke is to the front of the piston and the second stroke to the rear of the piston; hence two working strokes. Consequently, two deliveries of steam onto each piston face in

10578-455: The privilege of turning out the first electric locomotive after Periodic Overhauling (POH) in 1965 and the first Electric Multiple Unit motor coach was turned out after POH in the very same year. The workshop is headed by an SAG grade officer designated as Chief Workshop Manager. This is first complex which was established as part of workshop. Being used for overhauling of locomotives, it was named loco complex. Active shops : It caters to

10707-537: The proposal to construct the first railway line in India at Madras was made. In 1835, a railway track was constructed between Red Hills and Chintadripet in Madras and became operational in 1837. It was hauled by a rotary steam engine imported from England and was used for ferrying granite . The Madras Railway was established in 1845 and the Great Indian Peninsular Railway

10836-411: The purpose of which is to control the amount of steam leaving the boiler. The steam then either travels directly along and down a steam pipe to the engine unit or may first pass into the wet header of a superheater , the role of the latter being to improve thermal efficiency and eliminate water droplets suspended in the "saturated steam", the state in which it leaves the boiler. On leaving the superheater,

10965-526: The requirements of workshop as well as loco sheds and EMU carsheds of Eastern Railway. It is headed by a Senior Scale Officer under independent charge. This part was established in 1914. > WHEEL SHOP (SHOP NO-20), > EMU CORROSION REPAIR SHOP (SHOP NO-17), > ICF CORROSION REPAIR SHOP (SHOP NO- 18), > PAINT SHOP (SHOP NO-19) > BLACKSMITH SHOP (SHOP NO-24) > BOGIE REPAIR SHOP (SHOP NO-25) > ELECTRICAL SHOP (SHOP NO-26) > PLUMBING SHOP (SHOP NO-27) > MECHANICAL TRANSPORT SHOP (SHOP NO-33) It

11094-519: The route covered by GSM-R based Mobile Train Radio communication. In December 2017, Indian Railways announced that it will implement ETCS Level 2 system for signalling and control on key routes with an investment of ₹ 120 billion (US$ 1.4 billion). As of March 2023, Indian Railways manages and operates 7,308 stations. Prior to 2017, the stations were classified into seven categories based on their earnings. Since 2017, Indian Railways categorizes

11223-436: The route uses automatic block signalling for train operations – concentrated in high density routes, large cities and junctions. Remaining routes are based on absolute block signalling with trains manually controlled by signal men from the signal boxes typically located at stations. Few low density routes still use manual block signalling methods with communication on track clearance based on physical exchange of tokens. In

11352-418: The side of the piston receiving steam, thus slightly reducing cylinder power. Designing the exhaust ejector became a specific science, with engineers such as Chapelon , Giesl and Porta making large improvements in thermal efficiency and a significant reduction in maintenance time and pollution. A similar system was used by some early gasoline/kerosene tractor manufacturers ( Advance-Rumely / Hart-Parr ) –

11481-442: The stations by commercial importance into three different categories namely Non Suburban Group (NSG), Suburban Group (SG) and Halt Group (HG). These are further subdivided into subcategories based on their commercial importance (NSG 1–6, SG 1-3 and from HG 1–3). The commercial importance of a station is determined by taking into account its passenger footfall, earnings and strategic importance and these categories are used to determine

11610-400: The stations. Indian railways removed all unstaffed level crossings by 2019 with staffed level crossings being replaced by bridges. Other safety projects include the extension of an automated fire alarm system to all air-conditioned coaches and GPS-enabled Fog Pilot Assistance System railway signalling devices. In 2020, Indian Railways allowed the operation of private passenger trains for

11739-504: The steam exits the dry header of the superheater and passes down a steam pipe, entering the steam chests adjacent to the cylinders of a reciprocating engine. Inside each steam chest is a sliding valve that distributes the steam via ports that connect the steam chest to the ends of the cylinder space. The role of the valves is twofold: admission of each fresh dose of steam, and exhaust of the used steam once it has done its work. The cylinders are double-acting, with steam admitted to each side of

11868-477: The steam locomotive. Trevithick continued his own steam propulsion experiments through another trio of locomotives, concluding with the Catch Me Who Can in 1808, first in the world to haul fare-paying passengers. In 1812, Matthew Murray 's successful twin-cylinder rack locomotive Salamanca first ran on the edge-railed rack-and-pinion Middleton Railway . Another well-known early locomotive

11997-434: The track, is of paramount importance. Because reciprocating power has to be directly applied to the rail from 0 rpm upwards, this creates the problem of adhesion of the driving wheels to the smooth rail surface. Adhesive weight is the portion of the locomotive's weight bearing on the driving wheels. This is made more effective if a pair of driving wheels is able to make the most of its axle load, i.e. its individual share of

12126-433: The two cylinders generates a full revolution of the driving wheel. Each piston is attached to the driving axle on each side by a connecting rod, and the driving wheels are connected together by coupling rods to transmit power from the main driver to the other wheels. Note that at the two " dead centres ", when the connecting rod is on the same axis as the crankpin on the driving wheel, the connecting rod applies no torque to

12255-419: The water level in a transparent tube, or sight glass. Efficient and safe operation of the boiler requires keeping the level in between lines marked on the sight glass. If the water level is too high, steam production falls, efficiency is lost and water is carried out with the steam into the cylinders, possibly causing mechanical damage. More seriously, if the water level gets too low, the crown sheet (top sheet) of

12384-401: The water-tube Brotan boiler . A boiler consists of a firebox where the fuel is burned, a barrel where water is turned into steam, and a smokebox which is kept at a slightly lower pressure than outside the firebox. Solid fuel, such as wood, coal or coke, is thrown into the firebox through a door by a fireman , onto a set of grates which hold the fuel in a bed as it burns. Ash falls through

12513-408: The wheel. Therefore, if both cranksets could be at "dead centre" at the same time, and the wheels should happen to stop in this position, the locomotive could not start moving. Therefore, the crankpins are attached to the wheels at a 90° angle to each other, so only one side can be at dead centre at a time. Each piston transmits power through a crosshead , connecting rod ( Main rod in the US) and

12642-411: The wheels are coupled together, generally lack stability at speed. To counter this, locomotives often fit unpowered carrying wheels mounted on two-wheeled trucks or four-wheeled bogies centred by springs/inverted rockers/geared rollers that help to guide the locomotive through curves. These usually take on weight – of the cylinders at the front or the firebox at the rear – when the width exceeds that of

12771-406: The will to increase efficiency by that route. The steam generated in the boiler not only moves the locomotive, but is also used to operate other devices such as the whistle, the air compressor for the brakes, the pump for replenishing the water in the boiler and the passenger car heating system. The constant demand for steam requires a periodic replacement of water in the boiler. The water is kept in

12900-878: The world also runs in Austria: the GKB 671 built in 1860, has never been taken out of service, and is still used for special excursions. In 1838, the third steam locomotive to be built in Germany, the Saxonia , was manufactured by the Maschinenbaufirma Übigau near Dresden , built by Prof. Johann Andreas Schubert . The first independently designed locomotive in Germany was the Beuth , built by August Borsig in 1841. The first locomotive produced by Henschel-Werke in Kassel ,

13029-562: Was Puffing Billy , built 1813–14 by engineer William Hedley . It was intended to work on the Wylam Colliery near Newcastle upon Tyne. This locomotive is the oldest preserved, and is on static display at the Science Museum, London . George Stephenson , a former miner working as an engine-wright at Killingworth Colliery , developed up to sixteen Killingworth locomotives , including Blücher in 1814, another in 1815, and

13158-537: Was 132,310 km (82,210 mi). Track sections are rated for speeds ranging from 80 to 200 km/h (50 to 124 mph), though the maximum speed attained by passenger trains is 160 km/h (99 mph). The network was built with a variety of gauges , including 1,676 mm ( 5 ft 6 in ) broad gauge , 1,000 mm ( 3 ft  3 + 3 ⁄ 8  in ) metre gauge metre gauge and 762 mm ( 2 ft 6 in ) and 610 mm ( 2 ft ) narrow gauge ; but

13287-517: Was also included in the Class 10 English Communicative Curriculum of the CBSE . Kanchrapara Railway Workshop was established in 1863. Initial activities included the periodic overhauling of steam locomotives, wooden body Carriage and Wagons. The workshop also carried out overhauling and repair of aircraft during world war as well as manufacture of armoured cars and hand-grenade shells. This workshop also had

13416-644: Was built in 1834 by Cherepanovs , however, it suffered from the lack of coal in the area and was replaced with horse traction after all the woods nearby had been cut down. The first Russian Tsarskoye Selo steam railway started in 1837 with locomotives purchased from Robert Stephenson and Company . In 1837, the first steam railway started in Austria on the Emperor Ferdinand Northern Railway between Vienna-Floridsdorf and Deutsch-Wagram . The oldest continually working steam engine in

13545-760: Was constructed for the Coalbrookdale ironworks in Shropshire in the United Kingdom though no record of it working there has survived. On 21 February 1804, the first recorded steam-hauled railway journey took place as another of Trevithick's locomotives hauled a train along the 4 ft 4 in ( 1,321 mm )-wide tramway from the Pen-y-darren ironworks, near Merthyr Tydfil , to Abercynon in South Wales. Accompanied by Andrew Vivian , it ran with mixed success. The design incorporated

13674-556: Was deployed in September 1996. The ticketing network at stations is computerized with the exception of few stations. The Indian Railways website went online in February 2000 and online ticketing was introduced on 3 August 2002 through IRCTC. Indian Railways now provides multiple channels for passengers to book tickets through website , smartphone apps , SMS , rail reservation counters at train stations, or through private ticket booking counters. Reserved tickets may be booked up to 60 days in advance and confirmed reservation tickets will show

13803-411: Was dictated by the maximum axle loading of the railroad in question. A builder would typically add axles until the maximum weight on any one axle was acceptable to the railroad's maximum axle loading. A locomotive with a wheel arrangement of two lead axles, two drive axles, and one trailing axle was a high-speed machine. Two lead axles were necessary to have good tracking at high speeds. Two drive axles had

13932-487: Was entered in and won the Rainhill Trials . This success led to the company emerging as the pre-eminent builder of steam locomotives used on railways in the UK, US and much of Europe. The Liverpool and Manchester Railway opened a year later making exclusive use of steam power for passenger and goods trains . Before the arrival of British imports, some domestic steam locomotive prototypes were built and tested in

14061-578: Was extended to Kalyan in May 1854. Eastern India's first passenger train ran 39 km (24 mi) from Howrah , near Kolkata , to Hoogly on 15 August 1854. The construction on the first main line in the South between Royapuram in Madras and Arcot started in 1853, which became operational on 1 July 1856. On 24 February 1873, a horse-drawn 3.8 km (2.4 mi) tram opened in Calcutta between Sealdah and Armenian Ghat street. On 9 May 1874,

14190-487: Was fabricated by North British Locomotive Company in 1954. The first locomotive manufacturing unit at Chittaranjan was commissioned in 1950. The first rail coaches were manufactured in India from 1956 when the Integral Coach Factory was established at Madras. In 1956, the first air-conditioned train plied between Howrah and New Delhi . In 1957, Indian Railways adopted 25 kV AC traction with

14319-1160: Was gradually expanded to 18 zones over the years. The first steam operated railway operated in 1837 in Madras with the first passenger operating in 1853 between Bombay and Thane . In 1925, the first electric train ran in Bombay on DC traction. The first locomotive manufacturing unit was commissioned in 1950 at Chittaranjan with the first coach manufacturing unit set-up at Madras in 1955. Indian Railways runs various classes of express , passengers and suburban trains. In 2018–19, it operated 13,523 trains on average daily covering 7,325 stations and carried 8.44 billion passengers. Indian Railways also operates different classes of rail freight transport . In 2022–23, it operated 8,479 trains on average daily and transported 1418.1 million tonnes of freight . Indian Railways operates multiple classes of rolling stock , manufactured by self-owned coach-production facilities. As of March 2023 , Indian Railways' rolling stock consisted of 318,196 freight wagons and 84,863 passenger coaches . As of December 2023 , Indian Railways had 10,238 electric and 4,543 diesel locomotives amongst others. In 1832

14448-591: Was incorporated in 1849. Temporary railway lines were built such as the railway line at Dowleswaram built at by Arthur Cotton to supply stone for the construction of a dam over the Godavari River in 1845 and the Solani aqueduct railway, built by Proby Cautley in Roorkee to transport construction materials for an aqueduct over the Solani river in 1851. In 1852, a steam locomotive imported from England

14577-575: Was incorporated in 1999 and online ticketing was introduced on 3 August 2002 through IRCTC. In 2015, the first Compressed Natural Gas (CNG) powered trains were rolled out. Since 1925, the Railway budget was presented before the Union budget till 2016. The central government approved the merger of the Rail and General budgets from 2017. On 31 March 2017, Indian Railways announced a target of electrifying

14706-465: Was introduced on the suburban of Bombay by the Bombay, Baroda and Central India Railway between Colaba and Borivili and between Madras beach and Tambaram by the Madras and Southern Mahratta Railway in 1931. In 1957, Indian Railways decided to adopt 25 kV AC as its standard. The first 25 kV AC EMUs operated in Calcutta in 1962 and Madras in 1968. In 2017, Indian Railways announced a plan to electrify

14835-555: Was launched as Amrit Bharat Express . A high-speed rail line is under-construction between Mumbai and Ahmedabad which will become the first true high-speed rail line when completed in 2026. Mountain Railways of India refer to three rail lines operated by Indian Railways in hilly terrain . Darjeeling Himalayan Railway , a 610 mm ( 2 ft ) narrow-gauge railway in the Lesser Himalayas of West Bengal

14964-603: Was named The Elephant , which on 5 May 1835 hauled a train on the first line in Belgium, linking Mechelen and Brussels. In Germany, the first working steam locomotive was a rack-and-pinion engine, similar to the Salamanca , designed by the British locomotive pioneer John Blenkinsop . Built in June 1816 by Johann Friedrich Krigar in the Royal Berlin Iron Foundry ( Königliche Eisengießerei zu Berlin),

15093-566: Was never officially proven. In the United States, larger loading gauges allowed the development of very large, heavy locomotives such as the Union Pacific Big Boy , which weighs 540 long tons (550  t ; 600 short tons ) and has a tractive effort of 135,375 pounds-force (602,180 newtons). Beginning in the early 1900s, steam locomotives were gradually superseded by electric and diesel locomotives , with railways fully converting to electric and diesel power beginning in

15222-553: Was opened in 1881. The mountain railways were designated as World Heritage Sites in 1999. The Kalka-Shimla Railway , a 762 mm ( 2 ft 6 in ) narrow-gauge railway in the Siwalik Hills of Himachal Pradesh started operating in 1903. The Nilgiri Mountain Railway , a 1,000 mm ( 3 ft  3 + 3 ⁄ 8  in ) metre gauge rack railway in the Nilgiri Hills of Tamil Nadu

15351-458: Was opened in 1908 and is the only operational rack railway in India. These railways operate with its own dedicated fleet of locomotives and coaches. The first suburban electric trains were introduced in Bombay in 1925. Chennai suburban lines started operating in 1931 and Kolkata in 1957. Later, AC traction was adopted for suburban lines and are currently operated by Multiple Units (MUs) of various configurations. In 1984, Kolkata Metro ,

15480-534: Was opened. The arid nature of south Australia posed distinctive challenges to their early steam locomotion network. The high concentration of magnesium chloride in the well water ( bore water ) used in locomotive boilers on the Trans-Australian Railway caused serious and expensive maintenance problems. At no point along its route does the line cross a permanent freshwater watercourse, so bore water had to be relied on. No inexpensive treatment for

15609-601: Was previously met by Bharat wagon and engineering with the procurement and manufacturing now done by both in public and private sector. Apart from standard passenger classes, the Indian Railways has other specialized coach types used for dedicated functions. These include accident relief medical vans, brake vans, generator cars, inspection carriages, military cars, pantry car and parcel vans. These may be dedicated self-propelled units or attached to train-sets. Indian Railways operates various manufacturing units. Chittaranjan Locomotive Works (CLW), commissioned in 1950,

15738-419: Was proposed by William Reynolds around 1787. An early working model of a steam rail locomotive was designed and constructed by steamboat pioneer John Fitch in the US during 1794. Some sources claim Fitch's model was operable already by the 1780s and that he demonstrated his locomotive to George Washington . His steam locomotive used interior bladed wheels guided by rails or tracks. The model still exists at

15867-479: Was rolled out from ICF. Locomotives are manufactured by five owned manufacturing units of the Indian Railways and BHEL . As of 2021 , 37% of the trains are operated by diesel locomotives and rest mostly by electric locomotives. As of December 2023 , Indian Railways had 10,238 electric and 4,543 diesel locomotives amongst others. The early rail coaches were based on a prototype by a Swiss company and were termed as ICF coaches after Integral coach factory (ICF),

15996-577: Was soon established. In 1830, the Baltimore and Ohio Railroad 's Tom Thumb , designed by Peter Cooper , was the first commercial US-built locomotive to run in America; it was intended as a demonstration of the potential of steam traction rather than as a revenue-earning locomotive. The DeWitt Clinton , built in 1831 for the Mohawk and Hudson Railroad , was a notable early locomotive. As of 2021 ,

16125-403: Was supplied at stopping places and locomotive depots from a dedicated water tower connected to water cranes or gantries. In the UK, the US and France, water troughs ( track pans in the US) were provided on some main lines to allow locomotives to replenish their water supply without stopping, from rainwater or snowmelt that filled the trough due to inclement weather. This was achieved by using

16254-856: Was the first locomotive manufacturing unit in India. The first rail coache manufacturing unit, the Integral Coach Factory (ICF) was established at Madras in 1956. Banaras Locomotive Works (BLW), commissioned in 1961, is the second locomotive manufacturing unit operated by Indian Railways. BHEL, Patiala Locomotive Works , Diesel Locomotive Factory, Marhowrah and Electric Locomotive Factory, Madhepura also manufacture locomotives in India. Railway coaches are also manufactured at coach factories at Karputhala , Raebareli , Sonipat and Latur . Indian Railways also operates three rail wheel manufacturing factories at Bangalore , Chhpra and Raebareli. The locomotives are operated and maintained by 44 locomotive sheds. The repair and maintenance of

16383-404: Was to use built-up bar frames, with the smokebox saddle/cylinder structure and drag beam integrated therein. In the 1920s, with the introduction of "superpower", the cast-steel locomotive bed became the norm, incorporating frames, spring hangers, motion brackets, smokebox saddle and cylinder blocks into a single complex, sturdy but heavy casting. A SNCF design study using welded tubular frames gave

16512-573: Was tried at Byculla . In 1853, the first passenger train on 1,676 mm ( 5 ft 6 in ) broad gauge ran for 34 kilometres (21 mi) between Bombay and Thane which had 14-carriages carrying 400 people, hauled by three steam locomotives: the Sahib, Sindh and Sultan. The Thane viaducts, the first railway bridges , were built over the Thane creek when the Mumbai-Thane line

16641-555: Was used for ferrying granite. The first dedicated commercial freight rail was operated between Bombay and Ahmedabad in 1966. Indian Railways ferries various commodities and cargo to cater to various industrial, consumer, and agricultural segments. Apart from dedicated freight trains, parcels , mail and small cargo are carried on specialized carriages attached to passenger trains. In 2022–23, Indian Railways operated 8,479 trains on average daily and transported 1418.1 million tonnes of freight. Indian Railways has historically subsidized

#614385