Misplaced Pages

#51948

113-711: The first Laurel was developed by the Nissan Tsurumi R&;D Division and assembled at the Musashimurayama Plant of the former Prince Motor Company in 2-door and 4-door variants beginning in 1968. The Laurel was not marketed new in Japan at Nissan Prince Store locations that sold the Skyline and Gloria, former Prince products. Instead the Laurel was sold at Nissan Store as the junior model to

226-414: A countershaft (also called a layshaft ) and an output shaft . The input shaft is connected to the engine and spins at engine speed whenever the clutch is engaged. The countershaft has gears of various sizes, which are permanently meshed with the corresponding gear on the input shaft. The gears on the output shaft are also permanently meshed with a corresponding gear on the countershaft; however,

339-576: A 1.8 L inline-four engine , and in June 1970 a two-door hardtop coupé joined the lineup. The Laurel was conceived as a junior version of the all-new Gloria before Nissan acquired Prince, and one year later a 2000 cc engine became available in the four-door sedan as well. The focus on a luxurious appearance had appeared in 1962 with the Nissan Skyline Sport with an exotic, European influenced appearance. Its competitors at introduction were

452-523: A 1.8-litre four, a 2.0-litre inline-six (carburetted or fuel-injected, a first for the Laurel), a 2.8-litre six, or a 2.0-litre diesel four, sourced from Nissan Diesel as an alternative to the diesel-powered Toyota Mark II and the Isuzu Florian . Transmissions were mainly four- or five-speed manuals or a three-speed automatic, although a three-speed manual with a column shift was also available in

565-552: A 6-inch CRT TV screen installed in the dashboard below the A/C controls that allowed passengers to watch broadcast TV if the transmission was in Park and the parking brake applied. The screen was not touch sensitive, and didn't offer a CD-ROM based navigation system. The display also showed AM/FM stereo settings. The video entertainment system also had RCA connections to attach a camcorder and watch recorded video. The stereo and video equipment

678-577: A Skyline rack-and-pinion steering rack. In May 1985, the Grand Extra Limited edition was released. Detail improvements were made in October 1985 and January 1986. In October 1986, there were mechanical changes along with significant modifications to the exterior. There was a new turbocharged DOHC engine, the 2.0-liter RB20DET 24-valve six-cylinder, while the LD28 diesel engine was replaced by

791-522: A claimed top speed of 85 km/h (53 mph) and a range of 65 km (40 mi). Nissan's next electric car venture would be the 1998 Altra . The third generation appeared in January 1977. For the first time, the C230 was available in either saloon and hardtop coupé form, but also as a hardtop saloon without B-posts. The hardtop was only available with six-cylinder engines. Buyers could choose between

904-708: A column shifter and more practical, as the gearbox was mounted in front of the engine. The linkage for the shifter could then be positioned on top of the engine. The disadvantage is that shifting is less comfortable and usually slower to operate. Newer small cars and MPVs , like the Suzuki MR Wagon , the Fiat Multipla , the Toyota Matrix , the Pontiac Vibe , the Chrysler RT platform cars,

1017-417: A column shifter are the ability to switch between the two most commonly used gears—second and third—without letting go of the steering wheel, and the lack of interference with passenger seating space in vehicles equipped with a bench seat . Some smaller cars in the 1950s and 1960s, such as Citroën 2CV , Renault 4 and early Renault 5 feature a shifter in the dash panel. This was cheaper to manufacture than

1130-527: A column-mounted manual shifter. Outside North America, the column-mounted shifter remained in production. All Toyota Crown and Nissan Cedric taxis in Hong Kong had the 4-speed column shift until 1999 when automatic transmissions were first offered. Since the late 1980s or early 1990s, a 5-speed column shifter has been offered in some vans sold in Asia and Europe, such as Toyota Hiace , Mitsubishi L400 and

1243-411: A gear while the transmission requires the driver to adjust the throttle so that the transmission is not under load, and selecting a gear requires the engine RPM to be at the exact speed that matches the road speed for the gear being selected). Most motor vehicles use a pedal to operate the clutch; except for motorcycles, which usually have a clutch lever on the left handlebar . In most vehicles with

SECTION 10

#1732773034052

1356-425: A gearshift without fully disengaging the clutch). Larger differences in speed between the input shaft and the gear require higher friction forces from the synchromesh components, potentially increasing their wear rate. Even in modern transmissions where all of the forward gears are in a constant-mesh configuration, often the reverse gear uses the older sliding-mesh ("crash box") configuration. This means that moving

1469-758: A hubcap for Medalist colored bumper and large) and 50 Special Release III. January 1984 saw the abolition of the 1.8-litre GL models, while the Turbo Medalist Givenchy III limited edition also went on sale. European export models received the carburetted 2.0 (DX or SGL trim) and 2.4 inline-sixes (SGL), with 71 kW (97 PS) and 88 kW (120 PS) respectively, or with the large 2.8 diesel with 60 kW (82 PS). A fuel injected 2.4 with 127 PS (93 kW) later appeared for some markets. The 2.4-liter six only developed 113 PS (83 kW) in Swedish-market petrol cars as

1582-513: A luxury car, as the larger engine obligated Japanese drivers to pay higher amounts of annual road tax . In September 1975, in order to meet the new emissions regulations for that year, the L26 was replaced by the larger yet 2753 cc L28 six-cylinder. By October the carburettors in the L20 were replaced with electronic fuel injection and the engine was now dubbed L20E. Because of the difficulty in meeting

1695-451: A manual transmission is an automatic transmission . Common types of automatic transmissions are the hydraulic automatic transmission (AT) and the continuously variable transmission (CVT). The automated manual transmission (AMT) and dual-clutch transmission (DCT) are internally similar to a conventional manual transmission, but are shifted automatically. Alternatively, there are semi-automatic transmissions . These systems are based on

1808-421: A manual transmission, the driver selects gears by manipulating a lever called a gear stick (also called a gearshift , gear lever or shifter ). In most automobiles, the gear stick is located on the floor between the driver and front passenger, but some cars have a gear stick that is mounted to the steering column or center console. The movement of the gear stick is transferred (via solid linkages or cables) to

1921-400: A mechanism is needed to stop the input shaft, such as using the synchronizer rings for fifth gear. However, some vehicles do employ a synchromesh system for the reverse gear, thus preventing possible crunching if reverse gear is selected while the input shaft is still spinning. Most transmissions include a lockout mechanism to prevent reverse gear from being accidentally selected while the car

2034-703: A result of that country's stringent emissions standards. As large Japanese cars are not very popular with private buyers in Europe, the diesel saw the lion's share of sales, mainly for taxi usage. Fitted with a detuned version of the L24 engine, the Laurel was introduced to the Middle Eastern (mainly Saudi) market in 1982. Most of the information in this article was translated from the Nissan Laurel article on Japanese Misplaced Pages at ja:日産・ローレル . In October 1984,

2147-615: A shift lock. Tsurumi-ku, Yokohama Tsurumi-ku ( 鶴見区 ) is one of the 18 ku ( wards ) of the city of Yokohama in Kanagawa Prefecture , Japan . As of 2010, the ward had an estimated population of 270,433 and a density of 8,140 persons per km². The total area is 33.23 km². Tsurumi-ku is located in eastern Kanagawa Prefecture, in the northeast corner of the city of Yokohama. The area around present-day Tsurumi Ward has been inhabited continuously for thousands of years. Archaeologists have found stone tools from

2260-549: A single or SU twin-carburetor . The single carburetor generated 110 PS (81 kW; 108 hp) at 5600RPM, the dual carburetor generated 120 PS (88 kW; 118 hp) at 5800rpm, and the premium fuel dual carburetor generated 125 PS (92 kW; 123 hp) at 5800rpm. The Laurel hardtop coupe was introduced before the SOHC 2000 GT-X with the L20SU straight-six engine that appeared later in October. The 2000GX used

2373-441: A switch or pressing a button on the gearshift knob or on the steering column, or automatically by momentarily lifting the foot from the accelerator with the vehicle traveling above a certain road speed. Automatic overdrives were disengaged by flooring the accelerator, and a lockout control was provided to enable the driver to disable overdrive and operate the transmission as a normal (non-overdrive) transmission. The term 'overdrive'

SECTION 20

#1732773034052

2486-484: A synchromesh and teeth on each side in order to lock either gear to the shaft. Unlike some other types of clutches (such as the foot-operated clutch of a manual-transmission car), a dog clutch provides non-slip coupling and is not suited to intentional slipping. In order to provide smooth gearshifts without requiring the driver to manually match the engine revs for each gearshift, most modern passenger car transmissions use 'synchromesh' (also called 'synchronizer rings') on

2599-411: A three-speed manual transmission. This transmission, along with many similar designs that it inspired, was a non-synchronous (also called sliding-mesh ) design where gear changes involved sliding the gears along their shafts so that the desired cogs became meshed. The driver was therefore required to use careful timing and throttle manipulation when shifting, so the gears would be spinning at roughly

2712-429: Is also used to describe a gear with a ratio of less than one (e.g., if the top gear of the transmission has a ratio of 0.8:1). Vehicles with a manual transmission can often be push started when the starter motor is not operational, such as when the car has a dead battery or when the starter motor itself has malfunctioned and is unable to deliver sufficient rotational energy to turn the engine over. When push-starting,

2825-427: Is connected via a pinion gear at the end of the counter/output shaft. In a modern constant-mesh manual transmission, the gear teeth are permanently in contact with each other, and dog clutches (sometimes called dog teeth ) are used to select the gear ratio for the transmission. When the dog clutches for all gears are disengaged (i.e. when the transmission is in neutral), all of the gears are able to spin freely around

2938-445: Is moving forwards. This can take the form of a collar underneath the gear knob which needs to be lifted or requiring extra force to push the gearshift lever into the plane of reverse gear. Another design of transmission that is used in older cars , trucks , and tractors , is a non-synchronous transmission (also known as a crash gearbox). Non-synchronous transmissions use a sliding-mesh (or constant-mesh, in later years) design and have

3051-746: Is not considered a manual transmission. Some automatic transmissions are based on the mechanical build and internal design of a manual transmission but have added components (such as computer -controlled actuators and sensors ) which automatically control the timing and speed of the gear shifts and clutch; this design is typically called an automated manual transmission (or sometimes a clutchless manual transmission ). Contemporary manual transmissions for cars typically use five or six forward gears ratios and one reverse gear, however, transmissions with between two and seven gears have been produced at times. Transmissions for trucks and other heavy equipment often have between eight and twenty-five gears, in order to keep

3164-404: Is used to reverse the direction in which the output shaft rotates. In many transmissions, the input and output shafts can be directly locked together (bypassing the countershaft) to create a 1:1 gear ratio which is referred to as direct-drive . In a transmission for longitudinal engined vehicles (e.g. most rear-wheel-drive cars), it is common for the input shaft and output shaft to be located on

3277-447: The 2000 GTX-E . The styling of the coupe appears to be influenced by the 1970 Ford Torino and the 1971 Mercury Cougar , reflecting a popular styling trend during the 1960s and 1970s called " coke bottle ", and continued a softer appearance to the edgier Skyline. The G-20 4-cylinder and L20 six-cylinder engines were equipped with SU twin carburetors but were eliminated February 1976 due to emission regulations. Engines available at

3390-634: The Bakumatsu period , nearby Kanagawa-juku was the location of the signing of the Convention of Kanagawa , which ended Japan’s national isolation policy and led to the normalization of diplomatic relations between the United States and Japan. The subsequent Treaty of Amity and Commerce led to the establishment of a treaty port for foreign commerce and settlement, which was initially stipulated to be Kanagawa. However, for security reasons,

3503-497: The Butaketsu Laurel ("pig butt") because of its ample rear quarter panels and tail section, with the taillights incorporated into the rear bumper. The saloon continued to use MacPherson struts for the front wheels but now used a rear beam axle and semi-elliptic leaf spring . The hardtop coupé continued to share MacPherson struts for the front wheels and Semi-trailing arm for the rear suspension, and again shared with

Nissan Laurel - Misplaced Pages Continue

3616-666: The Chaser performance sedan. November 1982 saw the introduction of the exclusive "Laurel Turbo Medalist Givenchy Version" with Hubert de Givenchy doing the TV commercials in Japan, borrowing a marketing concept for an American luxury coupe, the Lincoln Continental Mark IV . The Givenchy was the top trim package, painted in Dark Charcoal over Siver two-tone paint, with contrasting medium brown cloth upholstery with

3729-674: The Honda Element , the Honda Civic , the Daihatsu Sigra , and the Honda Avancier , may feature a manual or automatic transmission gear shifter located on the vehicle's instrument panel, similar to the mid-1950s Chryslers and Powerglide Corvairs . Console-mounted shifters are similar to floor-mounted gear shifters in that most of the ones used in modern vehicles operate on a horizontal plane and can be mounted to

3842-782: The Japanese Paleolithic period and ceramic shards from the Jōmon period , and tombs from the Kofun period at numerous locations in the area. Under the Nara period Ritsuryō system, it became part of Musashi Province . During the Edo period , the territory came under the control of Tokugawa Ieyasu . It was administered as tenryō territory controlled directly by the Tokugawa shogunate , but administered through various hatamoto . During

3955-512: The LD28 diesel. In 1987, there were a minor facelift which revised the bumpers, new grilles and new lights in the front and back. The LD28 diesel engine were swapped out in favor of the similarly dimensioned RD28 . This generation was the only Laurel to be equipped with a V6 engine . The suspension remained as the MacPherson struts for the front wheels and semi-trailing arm with 4-links for

4068-517: The Nissan Cedric and executive limousine, V8-powered Nissan President . The Laurel, and its Skyline twin, saw yearly equipment, appearance and trim package changes, so as to appear fresh and new, and every four to five years were given an all-new appearance, while core technology that were tested and reliable remained underneath. Nissan intermittently listed the Laurel for sale in various Asian, European and South American markets, labeled as

4181-427: The splines on the shaft, forcing that shaft to rotate at the same speed as the gear hub. However, the clutch can move back and forth on the shaft, to either engage or disengage the splines. This movement is controlled by a selector fork that is linked to the gear lever. The fork does not rotate, so it is attached to a collar bearing on the selector. The selector is typically symmetric: it slides between two gears and has

4294-415: The stereo system or HVAC system , to help prevent accidental activation or driver confusion. More and more small cars and vans from manufacturers such as Suzuki , Honda , and Volkswagen are featuring console shifters in that they free up space on the floor for other features such as storage compartments without requiring that the gear shift be mounted on the steering column. Also, the basic location of

4407-471: The 1948 Ferrari 166 Inter and the 1953 Alfa Romeo 1900 Super Sprint . Five-speed transmissions became widespread during the 1980s, as did the use of synchromesh on all forward gears. Six-speed manual transmissions started to emerge in high-performance vehicles in the early 1990s, such as the 1990 BMW 850i and the 1992 Ferrari 456 . The first 6-speed manual transmission was introduced in the 1967 Alfa Romeo 33 Stradale . The first 7-speed manual transmission

4520-462: The 1968 Toyota Corona Mark II sedan, and the Mazda Luce which was introduced in 1966. The Laurel did not sell as well as expected, largely because the design was too similar to that of the smaller, modestly priced Bluebird (510) which was developed as a competitor before Nissan bought Prince. The Bluebird was exclusive to Nissan Store , alongside the higher-content luxury Laurel. This car

4633-592: The 80th anniversary of its foundation in 2009. Tsurumi Ward is a regional commercial center and bedroom community for central Yokohama and Tokyo. The coastal area is part of the Keihin Industrial Zone, and is the most industrialized region within Yokohama. Major factories are operated by: Daikokufuto, an artificial island in Tokyo Bay , is a major warehousing center. Sojiji Temple - Soji-ji

Nissan Laurel - Misplaced Pages Continue

4746-522: The C32 Laurel was released. Osamu Ito, Development Supervisor of the R31/32 Skyline, was assigned to redesign the Laurel. He saw the car needed significant changes and set about doing so. Some of the Laurel's new features included a 4-door sedan body, variations in the hardtop, and a more overall angular appearance, and also introduced the world's first electric retractable door mirrors. The C32

4859-681: The Datsun 200L-EV in export markets - developed to be used by the VIPs at the 1975 International Oceanographic Exposition in Okinawa. It was originally engineered by the Prince Motor Company , but produced by Nissan when the company assumed Prince operations in 1966. The C130-EV uses one 16.0 kW (21.5 hp) electric motor, rear-mounted and driving the rear axle through a two-speed automatic transmission. The Nissan Laurel C130-EV has

4972-489: The Datsun Laurel or Datsun 200L until exports from Japan ended after 1989. The Laurel was cancelled subsequent to Nissan's alliance with Renault . The name " laurel " is in reference to a laurel wreath , a symbol of triumph and is worn as a chaplet around the head, or as a garland around the neck. In April 1968, Nissan presented its new Laurel in four-door deLuxe and Super deLuxe versions, both equipped with

5085-583: The Givenchy logo pattern woven into the fabric. In 1981, the Nissan Laurel Spirit , exclusive to Nissan Store locations, was offered as a smaller alternative to the Laurel, while still offering the luxury content of the larger car. Development Supervisor, Itirou Makoto Sakurai, was in charge of developing the Laurel together with the Skyline. The Laurel's redesign was carried out in a European style and tone. The coefficient of drag (Cd value) of

5198-457: The Laurel for its overall reliability, low price, and ample equipment. Datsun-Nissan South Africa also developed a two-litre four-cylinder option not offered elsewhere to suit local needs with a lower-cost, torquier engine than the two-litre six sold elsewhere. The L20B engine offered 72 kW (98 PS) and was paired with somewhat lower equipment than the 100 kW (136 PS) 280L sold alongside it. November 1978 brought minor changes to

5311-574: The Laurel, and an optionally available turbocharged version of the same V6. In February 1988, there was an improved and some 20 releases Super medalist anniversary special edition. In May 1988, the "White Limited" model was released. In September of the same year, the Super Series Selection was added to the lineup. In December, private car and driving school versions were discontinued, leaving only taxis and other commercial models. In January 1989, Laurels with an automatic gearbox received

5424-458: The Laurel, including squaring off of the front headlights. The highest trim level, "Medalist", received air conditioning in addition to its OHC four-cylinder two-litre diesel engine. The 1800 cc cars switched to the newer Z18 crossflow engine and all Laurels now met the Showa 53 (1979) gasoline vehicle emission regulations. The "Medalist" trim package name would continue until 1999 when the Laurel

5537-426: The Skyline. One year later (January 1978) Nissan released a tenth anniversary edition, which adopted a special deep red body color known as "Laurel's Crimson", as well as trim-specific emblems, aluminum wheels and front grille. In 1979, the 2.4-litre L24 engine was added to the lineup. European outputs were 71 and 83 kW (97 and 113 PS) DIN for the 2.0 and the 2.4 inline-sixes. European buyers were attracted to

5650-533: The U.S. and Canada had a 3-speed column-mounted shifter—the first generation Chevrolet/GMC vans of 1964–70 vintage had an ultra-rare 4-speed column shifter. The column-mounted manual shifter disappeared in North America by the mid-1980s, last appearing in the 1987 Chevrolet pickup truck . Prior to 1980, the GM X platform compacts (Chevrolet Nova and its rebadged corporate clones) were the final passenger cars to have

5763-591: The actual settlement was established at neighboring Yokohama (present day Naka-ku). The Namamugi Incident , which led to the 1863 Anglo-Satsuma War , occurred in what is now part of Tsurumi Ward. Under the Ritsuryō system of antiquity, the area was part of the Tachibana District of Musashi Province. In the Meiji Restoration , the district became part of Kanagawa Prefecture in 1868. Tsurumi

SECTION 50

#1732773034052

5876-519: The car received some improvement and the Turbo Medalist model was new to the lineup. In September 1982, there was a minor change. Up a sense of luxury and large-scale extrusion in the chrome bumpers and rear license plate holder. The taillamp design was changed as well. Instead of the Z18 series engine, the new OHC four-cylinder 1809 cc CA18S engine was fitted to the Laurel 1.8. The engine range

5989-685: The ceiling and could be fastened into place. The styling of the Nissan Laurel began to resemble the larger Gloria but on a slightly smaller platform, with reduced tax liability based on the vehicles dimensions. The Toyota competitor was the Cresta hardtop, while the Skyline was the competitor to the Chaser sedan and in 1986, the Honda Vigor . The RB20E engine was equipped with six-cylinder series SOHC2.0L, VG20ET-SOHC2.0L V6 turbo, CA18S-series four-cylinder (LPG and specifications), LD28-series 6-cylinder diesel SOHC2.8L. The car's system also shared

6102-484: The collar from bridging the locking rings while the speeds are still being synchronized. This is achieved through 'blocker rings' (also called 'baulk rings'). The synchro ring rotates slightly because of the frictional torque from the cone clutch. In this position, the dog clutch is prevented from engaging. Once the speeds are synchronized, friction on the blocker ring is relieved and the blocker ring twists slightly, bringing into alignment certain grooves or notches that allow

6215-463: The cone-shaped sleeve on the dog collar so that the friction forces can reduce the difference in rotational speeds. Once these speeds are equalized, the dog clutch can engage, and thus the new gear is now in use. In a modern gearbox, the action of all of these components is so smooth and fast it is hardly noticed. Many transmissions do not include synchromesh on the reverse gear (see Reverse gear section below). The synchromesh system must also prevent

6328-417: The design of, and are technically similar to, a conventional manual transmission. They have a gear shifter which requires the driver's input to manually change gears, but the driver is not required to engage a clutch pedal before changing gear. Instead, the mechanical linkage for the clutch pedal is replaced by an actuator , servo , or solenoid and sensors , which operate the clutch system automatically when

6441-438: The dog clutch to fall into the engagement. Common metals for synchronizer rings are brass and steel , and are produced either by forging or sheet metal shaping. The latter involves stamping the piece out of a sheet metal strip and then machining to obtain the exact shape required. The rings are sometimes coated with anti-wear linings (also called 'friction linings') made from molybdenum , iron , bronze or carbon (with

6554-427: The dog clutches require the input shaft speed to match that of the gear being selected; otherwise, the dog teeth will fail to engage and a loud grinding sound will be heard as they clatter together. Therefore, to speed up or slow down the input shaft as required, cone-shaped brass synchronizer rings are attached to each gear. When the driver moves the gearshift lever towards the next gear, these synchronizer rings press on

6667-430: The driver to limit the adjustment information being provided by the sonar sensor, and change the setting from "Auto" to "Soft", "Medium" or "Hard" settings. The speed-sensitive rack-and-pinion power steering could also be separately reduced for a sporting feeling, and the suspension setting would modify both the steering feel and the shift points on the automatic transmission. The Medalist could be optionally installed with

6780-479: The driver to manually select the gears by operating a gear stick and clutch (which is usually a foot pedal for cars or a hand lever for motorcycles). Early automobiles used sliding-mesh manual transmissions with up to three forward gear ratios. Since the 1950s, constant-mesh manual transmissions have become increasingly commonplace, and the number of forward ratios has increased to 5-speed and 6-speed manual transmissions for current vehicles. The alternative to

6893-417: The driver to select the next-higher or next-lower gear. In a vehicle with a manual transmission, the flywheel is attached to the engine's crankshaft , therefore rotating at engine speed. A clutch disc sits between the flywheel and the transmission pressure plate which is attached to the transmission input shaft, controlling whether the transmission is connected to the engine or not. The clutch pedal controls

SECTION 60

#1732773034052

7006-631: The driver touches or moves the gearshift . This removes the need for a physical clutch pedal. A manual transmission requires the driver to operate the gear stick and clutch in order to change gears (unlike an automatic transmission or semi-automatic transmission , where one (typically the clutch) or both of these functions are automated ). Most manual transmissions for cars allow the driver to select any gear ratio at any time, for example shifting from second to fourth gear, or fifth to third gear. However, sequential manual transmissions , which are commonly used in motorcycles and racing cars , only allow

7119-413: The early 1950s, most cars only had synchromesh for the shift from third gear to second gear (drivers' manuals in vehicles suggested that if the driver needed to shift from second to first, it was best to come to a complete stop beforehand). Up until the late 1970s, most transmissions had three or four forward gear ratios, although five-speed manual transmissions were occasionally used in sports cars such as

7232-537: The emissions regulations, the twin-carburetted engines were all discontinued. The 1,770 cc L18 replaced the G18 in the lineup. In February 1976 carburetted 1.8-litre and 2.0-litre engines which met the 1976 emissions regulations were introduced, and were identified with the Nissan NAPS badge. In 1974 Nissan developed an electric passenger sedan based on the Nissan Laurel. The Nissan Laurel C130-EV - referred to as

7345-407: The energy generated by the wheels moving on the road is transferred to the driveshaft, then the transmission, and eventually the crankshaft. When the crankshaft spins as a result of the energy generated by the rolling of the vehicle, the motor is cranked over. This simulates what the starter is intended for and operates in a similar way to crank handles on very old cars from the early 20th century, with

7458-456: The engine speed within the optimal power band for all typical road speeds. Operating such transmissions often uses the same pattern of shifter movement with a single or multiple switches to engage the next sequence of gears. Many of the first automobiles were rear-engined, with a simple belt-drive functioning as a single-speed transmission. The 1891 Panhard et Levassor is considered a significant advance in automotive transmissions since it used

7571-399: The fifth selector on the main shaft. This means that when the vehicle is stopped and idling in neutral with the clutch engaged and the input shaft spinning, the third-, fourth-, and fifth-gear pairs do not rotate. When neutral is selected, none of the gears on the output shaft are locked to the shaft, allowing the input and output shafts to rotate independently. For reverse gear, an idler gear

7684-526: The first-gen Fiat Ducato . Many European cars had manual column shifts and the Renault 16TX had a 5 speed. Column shifters are mechanically similar to floor shifters, although shifting occurs in a vertical plane instead of a horizontal one. Because the shifter is further away from the transmission, and the movements at the shifter and at the transmission are in different planes, column shifters require more complicated linkage than floor shifters. Advantages of

7797-442: The forces required or provide a faster shift time . The first car to use a manual transmission with synchromesh was the 1929 Cadillac . Most North American marques had adopted synchronized manual transmissions, usually for second and high gears, by the mid-1930s. In 1947, Porsche patented the split ring synchromesh system. The 1952 Porsche 356 was the first car to use a transmission with synchromesh on all forward gears. In

7910-401: The forward gears. These devices automatically match the speed of the input shaft with that of the gear being selected, thus removing the need for the driver to use techniques such as double-clutching . The synchromesh transmission was invented in 1919 by Earl Avery Thompson and first used on production cars by Cadillac in 1928. The need for synchromesh in a constant-mesh transmission is that

8023-459: The four-door hardtop front driver and passenger seat belt shoulder strap was connected at the top to the ceiling, however, the upper portion could be detached, with the shoulder strap emerging from the side door support, resting on the driver's and passenger's shoulder. This provided rear passengers an unobstructed view from the rear seat without the seat belt hanging from the ceiling when the windows were retracted. The upper part would then swing up to

8136-425: The four-door hardtop is 0.38. The lowest-priced Z18 is a four-cylinder engine, as is the 2-litre Z20. The L20-series are inline-six cylinder models, also available in fuel injected L20E type, and as the turbocharged L20ET - the first turbocharged Laurel. On top of the lineup was the 2.8-litre L28E, and for some export markets the 2.4-litre L24 engine (usually carburetted) was also offered. Mostly for commercial use there

8249-418: The front-wheel-drive transaxle's ring gear. This allows for a narrower transmission since the length of each countershaft is halved compared with one that contains four gears and two shifters. The fixed and free gears can be mounted on either the input or output shaft or both. For example, a five-speed transmission might have the first-to-second selectors on the countershaft, but the third-to-fourth selector and

8362-437: The gear shift in comparison to the column shifter makes console shifters easier to operate than column shifters. In the 1950s, 1960s, and 1970s, fuel-efficient highway cruising with low engine speed was in some cases enabled on vehicles equipped with 3- or 4-speed transmissions by means of a separate overdrive unit in or behind the rear housing of the transmission. This was actuated either manually while in high gear by throwing

8475-410: The gearshift lever into reverse results in gears moving to mesh together. Another unique aspect of the reverse gear is that it consists of two gears—an idler gear on the countershaft and another gear on the output shaft—and both of these are directly fixed to the shaft (i.e. they are always rotating at the same speed as the shaft). These gears are usually spur gears with straight-cut teeth which—unlike

8588-410: The helical teeth used for forward gear—results in a whining sound as the vehicle moves in reverse. When reverse gear is selected, the idler gear is physically moved to mesh with the corresponding gears on the input and output shafts. To avoid grinding as the gears begin to the mesh, they need to be stationary. Since the input shaft is often still spinning due to momentum (even after the car has stopped),

8701-645: The late 1930s and became common during the 1940s and 1950s. If a U.S. vehicle was equipped with overdrive , it was very likely to be a Borg-Warner type, operated by briefly backing off the accelerator pedal when above 28 mph (45 km/h) to enable, and momentarily flooring the same pedal to return to normal gear. The control simply disables overdrive for such situations as parking on a hill or preventing unwanted shifting into overdrive. [REDACTED] Later, European and Japanese models began to have 4-speed column shifters with this shift pattern: [REDACTED] A majority of North American-spec vehicles sold in

8814-399: The latter usually reserved for high-performance transmissions due to their high cost). Mechanical wear of the synchronizer rings and sleeves can cause the synchromesh system to become ineffective over time. These rings and sleeves have to overcome the momentum of the entire input shaft and clutch disk during each gearshift (and also the momentum and power of the engine, if the driver attempts

8927-523: The lower spec and commercial versions. In the Autumn of 1978, the C230 received a mild facelift (type C231), marked visually by squared instead of round double headlights. The Toyota competitor was the Mark II coupé and sedan. Again, comfort was prioritized over handling and agility, while still using the identical MacPherson struts for the front wheels and Semi-trailing arm for the rear suspension from

9040-677: The new RD28-series six-cylinder diesel engine. In May 1987, the "Grande Extra White Special" edition was released. In August of the same year, the Grande Touring Limited was added to lineup. Beginning January 1988, the Laurel was joined by a longer version at 2,735 mm (107.7 in) of the Nissan Gloria stablemate, called the Nissan Gloria Cima which offered an improved version of the V6 engine available on

9153-462: The nickname "crash" because the difficulty in changing gears can lead to gear shifts accompanied by crashing/crunching noises. Vehicles with manual transmissions use a clutch to manage the linkage between the engine and the transmission, and decouple the transmission from the engine during gearshifts and when the vehicle is stationary. Without a clutch, the engine would stall any time the vehicle stopped, and changing gears would be difficult (deselecting

9266-406: The other shaft, with a bearing located between the two shafts. In a transmission for transverse engined vehicles (e.g., front-wheel-drive cars), there are usually only two shafts: input and countershaft (sometimes called input and output). The input shaft runs the whole length of the gearbox, and there is no separate input pinion. These transmissions also have an integral differential unit, which

9379-489: The output shaft gears are able to rotate independently of the output shaft itself (through the use of bearings located between the gears and the shaft). Through the use of collars (operated using the shift rods ), the speed of the output shaft becomes temporarily locked to the speed of the selected gear. Some transmission designs—such as in the Volvo 850 and S70—have two countershafts, both driving an output pinion meshing with

9492-401: The output shaft inside the transmission. This is a fundamental difference compared with a typical hydraulic automatic transmission , which uses an epicyclic (planetary) design, and a hydraulic torque converter . An automatic transmission that allows the driver to control the gear selection (such as shift paddles or "+/-" positions on the gear selector) is called a manumatic transmission, and

9605-424: The output shaft. When the driver selects a gear, the dog clutch for that gear is engaged (via the gear selector rods), locking the transmission's output shaft to a particular gear set. This means the output shaft rotates at the same speed as the selected gear, thus determining the gear ratio of the transmission. The dog clutch is a sliding selector mechanism that sits around the output shaft. It has teeth to fit into

9718-444: The pressure plate ( clutch engaged – the clutch pedal is not being pressed) or not connected to the engine ( clutch disengaged – the clutch pedal is being pressed down). When the engine is running and the clutch is engaged (i.e., clutch pedal up), the flywheel spins the clutch pressure plate and hence the transmission. The design of most manual transmissions for cars is that gear ratios are selected by locking selected gear pairs to

9831-423: The rear suspension from the Skyline. If the Laurel was installed with the " Super Sonic Suspension " system, a sonar module was mounted under the front bumper and scanned the road surface, adjusting the suspension accordingly via actuators mounted on all four coil over shock absorbers and the front suspension was installed with a multi-link suspension . There was also a switch on the center console that allowed

9944-464: The rear suspension from the Skyline. The Laurel remained exclusive to Nissan Store , the Skyline at Nissan Prince Store , and the new Leopard coupe and sedan were exclusive to Nissan Store remaining as an upscale alternative to the Bluebird, while the Laurel added more luxury equipment and a price point to match. The Toyota competitor was the Cresta hardtop while the Skyline was an alternative to

10057-569: The rear wheels that was fitted on the C10 Skyline. August 1970 saw the release of a modified version of the four-door sedan version, now with the same roof angle as that of the hard top. The instrument panel received redesigned panel meters, and the more luxurious GL grade was added. The Laurel 2000GX, Nissans first hardtop, was introduced June 1970 and was equipped with the Prince developed SOHC 1,990 cc G20 -series four-cylinders with either

10170-419: The rear. A feature that was unique to the 2000GX was the stylish at the time sequential rear turn signals, where three light blubs would flash from the center to the outer edge on both the coupe and sedan. All Laurel coupes were also given a vinyl roof as standard equipment. In April 1972, the second Laurel generation appeared, again in four-door saloon and two-door hardtop coupé form affectionately known as

10283-401: The same axis, since this reduces the torsional forces to which the transmission casing must withstand. The assembly consisting of both the input and output shafts is referred to as the main shaft (although sometimes this term refers to just the input shaft or output shaft). Independent rotation of the input and output shafts is made possible by one shaft being located inside the hollow bore of

10396-476: The same chassis as the GT-X and GT-R while having a longer wheelbase. The GT-R garnered most of the attention, having been raced and built for that purpose, while the 2000GX was developed for comfortable yet spirited performance. The 2000GX used the same 5-speed manual transmission , an available limited slip differential, and also used semi-trailing arm strut suspension, with disc brakes at the front and drum brakes at

10509-441: The same speed when engaged; otherwise, the teeth would refuse to mesh. This was difficult to achieve, so gear changes were often accompanied by grinding or crunching sounds, resulting in the gearboxes being nicknamed "crash boxes". Even after passenger cars had switched to synchronous transmissions (i.e. with synchronizers), many transmissions for heavy trucks, motorcycles and racing cars remained non-synchronous, in order to withstand

10622-422: The selector forks within the transmission. Motorcycles typically employ sequential manual transmissions , although the shift pattern is modified slightly for safety reasons. Gear selection is usually via the left-foot (or, on older motorcycles; right-foot) shift lever with a layout of 1–N–2–3–4–5–6. During the period when U.S. vehicles usually had only three forward speeds, the most common gear-shifter location

10735-562: The time were the four-cylinder 1815 cc G18 and 1990 cc G20, and the six-cylinder 1998 cc L20. Both the G20 and L20 were available with twin SU carburetors as an option. However, only the G20 equipped cars outwardly announced this with a "Twin Carburetor 2000GX" badge. Sales in Japan (very few were exported) ran to about 96,000 per year, with three-quarters sedans. The Toyota competitor

10848-484: The transmission. FF (front-engined, front-wheel drive) vehicles, RR (rear-engined, rear-wheel drive) vehicles and front-engined vehicles with rear-mounted gearboxes often require a mechanical linkage to connect the shifter to the transmission. Some vehicles have a gear lever mounted on the steering column. A 3-speed column shifter, which came to be popularly known as a "three on the tree", began appearing in America in

10961-467: The vehicle's transmission in much the same way a floor-mounted shifter can. However, because of the location of the gear shifter in comparison to the locations of the column shifter and the floor shifter, as well as the positioning of the shifter to the rest of the controls on the panel often require that the gearshift be mounted in a space that does not feature a lot of controls integral to the vehicle's operation, or frequently used controls, such as those for

11074-727: The zone of Kikuna Elementary School ( 菊名小学校 ), not in Tsurumi-ku, includes a part of Tsurumi-ku. International schools: Manual transmission A manual transmission ( MT ), also known as manual gearbox , standard transmission (in Canada , the United Kingdom and the United States ), or stick shift (in the United States), is a multi-speed motor vehicle transmission system where gear changes require

11187-563: Was cancelled. Later, in October 1979, a two-litre four-cylinder gasoline option (Z20-series) was added in several markets. Also new were the options of automatic transmission and the SGL equipment grade on diesel vehicles. In February 1980, an electric sunroof was added to the hardtop version of the Medalist. This was the first year in which a sunroof was a model option. In July 1980, a special limited edition "gold medalist" top-of-the-line trim

11300-439: Was completely devastated during the massive Yokohama air raid of May 29, 1945. The area soon rebuilt after the end of the war, assisted by an influx of educational facilities in the 1950s and rapid re-industrialization of the area in the 1950s and 1960s. The Tsurumi railway accident occurred near Tsurumi Station on November 9, 1963, killing 161 people. The population of Tsurumi Ward surpassed 260,000 people in 2007, and celebrated

11413-517: Was connected to Yokohama and Tokyo by train in 1872, and the area rapidly urbanized. Sōji-ji , the head temple of the Sōtō sect of Zen Buddhism relocated to Tsurumi from Ishikawa Prefecture in 1911. Tsurumi suffered severe damage from the 1923 Great Kantō earthquake . In April 1924, Tsurumi became a town within Tachibana District. On October 1, 1927 Tsurumi became a ward within the city of Yokohama. The area suffered greatly again during World War II , and

11526-692: Was developed by the Nissan Tsurumi vehicle development team, but the C30 Laurel was fitted with the Prince four-cylinder SOHC engine, the G18 of 1,815 cc capacity. Conversely, the GC10 Skyline 2000GT was developed by the former Prince Ogikubo vehicle development team but was fitted with Nissan's L20 six-cylinder SOHC engine. The suspension is the same MacPherson struts for all wheels and Semi-trailing arm independent suspension for

11639-873: Was founded in 1925. It has a great campus with lots of greenery. The total student population is 3099. It is located very close to the Soji-ji Temple. Mitsuike Park - Mitsuike Koen is a beautiful place for a relaxing stroll. The best time to visit is during the cherry blossom season, when 1600 trees from 78 different species are in full bloom. You will find there a Korean Garden, three ponds and two nice walking trails. Colleges and universities Kanagawa Prefectural Board of Education operates prefectural high schools. Yokohama Municipal Board of Education  [ ja ] operates municipal high schools: Private high schools: The municipal board of education operates municipal elementary and junior high schools. Junior high schools: Elementary schools: Additionally,

11752-529: Was founded in 740. It is one of the two biggest head temples (daihonzan) of the Soto school of Zen Buddhism . The temple ground covers an area of nearly 50000 square meters. Soji-ji was rebuilt in Yokohama in 1911, after it burned down at its old location in Wajima City, Ishikawa Prefecture. Address: Sojiji Temple, 2-1-1 Tsurumi, Tsurumi-ku, Yokohama-shi, Kanagawa-ken Tsurumi University - The university

11865-466: Was introduced in the 2012 Porsche 911 (991) . In 2008, 75.2% of vehicles produced in Western Europe were equipped with manual transmission, versus 16.1% with automatic and 8.7% with other. A manual transmission has several shafts with various gears and other components attached to them. Most modern passenger cars use 'constant-mesh' transmissions consisting of three shafts: an input shaft ,

11978-461: Was on the steering column, a layout that was sometimes called "three on the tree". By contrast, high-performance cars, and European vehicles in general, mostly used a four-speed transmission with floor-mounted shifters. That layout was referred to as "four on the floor". Most FR (front-engined, rear-wheel drive) vehicles have a transmission that sits between the driver and the front passenger seat. Floor-mounted shifters are often connected directly to

12091-631: Was overhauled at the time and now included the CA18S, L20E, turbocharged L20ET, the four-cylinder SOHC Z20S, and the diesel LD20 and LD28-6 models. The carburetted L20, the L28E, and the column-shifted LD20 (six-seater) were discontinued. The six-cylinder gasoline-powered car with automatic transmission and Super Touring equipment received an overdrive gear at the same time. In November 1982, the Turbo Medalist Givenchy Version II

12204-556: Was released. The C31 model, introduced in November 1980, was the first model that was only available in a four-door form, either as a sedan or hardtop . Engines for the C31 were 1.8-liter, 2.0-liter L20, 2.4-liter L24 gasoline, and 2.8-liter diesel. The coupé was replaced by the new Nissan Leopard F30 , while the Laurel and Leopard continued to use the same MacPherson struts for the front wheels and semi-trailing arm with 4-links for

12317-463: Was released. In February 1983, the "50 Special" released. In March, the Givenchy II version went on sale. In May, another 50 Special II vehicles were launched. In July, electrically retractable fender and door mirrors were introduced, a first. In October, taxi and driver instruction vehicles with an OHC LPG four-cylinder engine (Z18P, Standard or GL equipment) were added. SGL Grand Touring car (with

12430-416: Was supplied by Sony. Also available was a modification to the front passenger seat Nissan called "Partner Comfort Seat" where the top portion of the front passenger seat was further articulated to tilt forward, supporting the passengers shoulders while allowing the seatback structure to recline. The front edge of the passenger seat cushion was also adjustable. To enhance rear passenger comfort and convenience,

12543-485: Was the Mark II coupé and sedan. In October 1973 the first Laurel with the 2565 cc L26 six-cylinder engine was added and badged as "2600SGL". Since the engine was over two litres, it was not restrained by the size limits imposed by Japanese regulations, and therefore it was fitted with bigger bumpers than regular Laurels. The installation of the 2.6-litre engine in Japanese models helped identify this generation as

12656-451: Was the four-cylinder LD20 diesel engine, while private users usually preferred the larger six-cylinder LD28 type which was also available with much better equipment. In February 1981, the GX trim level was added. L20E sedan with independent rear suspension in the vehicle suspension formula (a six-link independent rear suspension was equipped as standard on the turbocharged cars). In November 1981,

12769-487: Was the last model to be sold in Europe, where the Laurel was replaced by the front-wheel-drive Nissan Maxima (PU11) which was not available as a diesel and had a sportier, more luxurious air. The C32 were fitted with a variety of gasoline engines, inline-fours and V6 engines ranging from 1.8 to 3.0 liters. Some engines, like the L24 and the electronically carbureted VG30S were reserved for export. The C32 Laurel also came with

#51948