Misplaced Pages

#760239

138-579: The Chevrolet Impala ( / ɪ m ˈ p æ l ə , - ˈ p ɑː l ə / ) is a full-size car that was built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 to 2020. The Impala was Chevrolet's popular flagship passenger car and was among the better-selling American-made automobiles in the United States. For its debut in 1958, the Impala was distinguished from other models by its symmetrical triple taillights . The Chevrolet Caprice

276-647: A bore × stroke of 4 + 1 ⁄ 4  in × 4 in (108.0 mm × 101.6 mm). The 1970 Chevrolet Corvette LS-5 version of this engine was factory-rated at 390 bhp (395 PS; 291 kW) and 500 lb⋅ft (678 N⋅m), and the LS-6 engine equipped with a single 4-barrel 800 cu ft/min (23 m /min) Holley carburetor was upgraded to 450 bhp (456 PS; 336 kW) at 5600 rpm and 500 lb⋅ft (678 N⋅m) at 3600 rpm of torque . The AHRA ASA (Showroom Stock Automatic) Class record-holding Chevelle LS-6 for

414-550: A forged steel crankshaft . This dual-quad version was immortalized in the Beach Boys song titled " 409 ". In the 1963 model year, output reached 425 bhp (431 PS; 317 kW) at 6000 rpm and 425 lb⋅ft (576 N⋅m) at 4200 rpm of torque with the Rochester 2X4-barrel carburetor setup, a compression ratio of 11:1 and a solid lifter camshaft . The engine was available through mid-1965, when it

552-402: A 32° wedge-shaped combustion space ... The addition of two milled cutouts [in the head] to extend the volume of the combustion wedge can create a compression ratio of 7.5:1; one milled cutout produces a 9.5:1 compression ratio. The difference between the volume of these cutouts provides a wide compression range without making any changes in the piston or cylinder head. The number or size of cutouts

690-530: A 396 cu in (6.5 L) variant; however only the 427 cu in (7.0 L) engine (Mark IIS) was ever raced. It gained its nickname due to the incredible speeds cars equipped with it attained during its debut, being considerably faster than the well known W-series powered cars. The engine was first used in Mickey Thompson 's Z-06 Corvettes at Daytona in the 1963 Daytona 250 Miles – American Challenge Cup, and then in 1963 Daytona 500 where

828-457: A 4-door hardtop Sport Sedan with the SS package). The package also included upgraded tires on station wagon wheels, springs, shocks and special sintered metallic brake linings. Only 142 1961 Impala Super Sports came from the factory with the 409. In addition to the factory-installed SS package, Chevrolet dealers could add SS trim to any standard Impala without the "mandatory" performance upgrades, and

966-486: A December 17, 1960, press release, Chevrolet introduced the Impala SS (Super Sport) option to the market. The SS badge was to become Chevrolet's signature of performance on many models, though it often has been an appearance package only. The Impala's factory SS package in 1961 was truly a performance package when so equipped from the factory with both the trim and "mandatory" suspension and engine upgrades, beginning with

1104-619: A cowl-induction air intake system. The aluminum body parts were fabricated in Flint, Michigan at the facility now known as GM Flint Metal Center. Unlike the later second-generation 427, it was based on the W-series 409 engine, but with a longer 3.65 in (93 mm) stroke. A high-rise, two-piece aluminum intake manifold and dual Carter AFB carburetors fed a 13.5:1 compression ratio to produce 430 horsepower (320 kW) and 575 lb⋅ft (780 N⋅m) of torque. Fifty RPO Z11 cars were produced at

1242-422: A distinctive appearance. The W-series was produced from 1958 to 1965, in three displacements : The W-series engine was made of cast iron . The engine block had 4.84-inch (123 mm) bore centers, two-bolt main bearing caps, a "side oiling" lubrication system (the main oil gallery located low on the driver's side of the crankcase), with full-flow oil filter, and interchangeable cylinder heads . Heads used on

1380-450: A few Chevrolet dealers as optional performance parts. The LS-7 was later offered as a crate engine from Chevrolet Performance with an officially rated power minimum of 500 hp (373 kW) gross. In 1971, the LS-5 produced 365 hp (272 kW) and 550 lb⋅ft (746 N⋅m), and the LS-6 option came in at 425 hp (317 kW) and 575 lb⋅ft (780 N⋅m). In 1972, only

1518-407: A grille which extended below the bumper. Powertrains consisted of mostly V8 engines. The 250 inline six was still standard for Sport Coupe and 4-door sedan models; the 350 2bbl V8 became the standard engine from 1973 to 1976, with 350 cubic inches (5.7 L), 400 cubic inches (6.6 L), 402 cubic inches (6.6 L) (through 72) or 454 cubic inches (7.4 L) optional. The best-selling body style

SECTION 10

#1732782524761

1656-400: A large "teardrop" design at each side, and two slim-wide, non-functional front air intake scoops were added just above the grille. The Impala became a separate series, adding a four-door hardtop and four-door sedan to the two-door Sport Coupe and convertible and a five-door station wagon. Sport Coupes featured a shortened roof line and wrap-over back window. The standard engine was an I6, while

1794-418: A lower cost. Into the 1970s, the same vehicles could transport up to six occupants comfortably (or eight in a station wagon), at the expense of high fuel consumption. The sales of full-size vehicles in the United States declined after the early 1970s fuel crisis. In response to the 1978 implementation of CAFE , American manufacturers implemented downsizing to improve fuel economy, with full-size vehicles as

1932-488: A manual transmission. Due to reliability problems, the optional Turboglide automatic transmission was discontinued, leaving Powerglide the only automatic transmission available until 1965. A new radio was optional. The Beach Boys produced a hit single, " 409 " , referring to the Chevrolet, which became an iconic song for these cars. Impalas again featured premium interior appointments, plusher seats could be done by

2070-420: A new instrument panel, grille, wheel covers (except for SS models), and rectangular taillights that wrapped around to the side of the quarter panels. Standard features now included lap belts front and rear, reverse lamps, day/night rearview mirror, and a padded dashboard. The 1967 model was redesigned with enhanced Coke bottle styling that featured Corvette-inspired front and rear fender bulges. The curves were

2208-504: A number of 1961s were so equipped. Starting for the 1962 model year, the Impala SS was an appearance package limited to hardtop coupe and convertible coupe models, available with all engines in the Impala series starting with the base 235 cu in (3.9 L), 135 hp (101 kW; 137 PS) inline-6 through 1967, though the big-block engines and heavy-duty parts could still be ordered. From 1967 to 1969, an additional model,

2346-456: A radio and installed in a dashboard moulding made of fibreglass, not metal—until 1969. Radios (centrally mounted) and heaters were locally sourced and wipers parked in the center of the windscreen. Australian models were assembled in Australia by General Motors-Holden from kits, as this lessened tax on the cars. The Australian cars had locally sourced amber flashing rear indicators replacing

2484-570: A raised-deck, four-bolt main bearing cap cylinder to accommodate an extra oil control ring on the pistons. Unfortunately, the raised deck design complicated the use of the block in racing applications, as standard intake manifolds required spacers for proper fit. Distributors with adjustable collars that allowed adjustments to the length of the distributor shaft also had to be used with 366 and 427 truck blocks. Mark IV engines also found themselves widely used in power boats. Many of these engines were ordinary Chevrolet production models that were fitted with

2622-416: A reliable means of distinguishing a 348 from the larger engines. As with the 265 and 283 cu in (4.3 and 4.6 L) "small-block" engines, the W-series valve gear consisted of tubular steel pushrods operating stud-mounted, stamped-steel rocker arms. The push rods also acted as conduits for oil flow to the valve gear. Due to the relatively low mass of the valve train, mechanical lifter versions of

2760-499: A second production line stock (but recently rebuilt and partially blueprinted) ZL1 revealed nearly identical figures for the various "gross" conditions. Period magazine tests of the ZL1 were quite rare due to the rarity of the engine itself. High-Performance Cars tested a production line stock, but well tuned, example and recorded a 13.1 second/110 mph (180 km/h) 1 ⁄ 4 mile (402 m), which correlates quite well with

2898-508: A single 3" catalytic converter. Mark IV engines saw extensive application in Chevrolet and GMC medium duty trucks, as well as in Blue Bird Corporation 's All American and TC/2000 transit buses (the latter up until 1995, using a 427 with purpose-built carburetor). In addition to the 427, a 366 cu in (6.0 L) version was produced for the commercial market. Both the 366 and 427 commercial versions were built with

SECTION 20

#1732782524761

3036-499: A special green-gold color. The system was not advertised in a big way and many of the cars were used for crash testing by both GM and the U.S. government. Over the decades, the system proved durable and successfully protected front passengers in front-end collisions. Chevrolet did not offer ACRS in 1974; however, it was offered in Oldsmobile, Buick, and Cadillac models that year as an option and did save lives. One ACRS-equipped Impala

3174-424: A substantially oversquare design. This engine was superseded by the 409 cu in (6.7 L) as Chevrolet's top performing engine in 1961 and went out of production for cars at the end of that year. It was produced through 1964 for use in large Chevrolet trucks. With a four-barrel carburetor , the base Turbo-Thrust produced 250 hp (186 kW). A special " Tri power " triple-two-barrel version, called

3312-399: A two barrel carburetor. The 283 was also enlarged to 327-cubic-inch (5.4 L), offered in two versions, one with 250 bhp (186 kW) and one with 300 bhp (224 kW). The 348-cubic-inch (5.7 L) V8 was discontinued and replaced by the 380 bhp (283 kW) 409-cubic-inch (6.7 L) or 409 bhp (305 kW) 409-cubic-inch (6.7 L) engine, available only with

3450-475: A two-spoke steering wheel and color-keyed door panels with brushed aluminum trim. No other series included a convertible. The 1958 Chevrolet models were longer, lower, and wider than their predecessors. The 1958 model year was the first with dual headlamps. The tailfins of the 1957 were replaced by deeply sculptured rear fenders. Impalas had three taillights each side, while lesser models had two and wagons just one. The Impalas included crossed-flag insignias above

3588-643: Is commonly mentioned in West Coast hip hop lyrics. Right-hand drive cars were made at GM's Oshawa plant in Canada and often shipped overseas in kit form for assembly in South Africa, New Zealand and Australia. The RHD cars—Chevrolet or equivalent Pontiac (built on Chevrolet frames and using Chevrolet engines in Canada)—all used a right hand drive version of the left-hand drive 1961 Pontiac dashboard. In

3726-488: Is developed at relatively low engine speeds, resulting in an engine with a broad torque curve. With its relatively flat torque characteristics, the "W" engine was well-suited to propelling both the trucks and heavier cars that were in vogue in the US at the time. The W-series was a physically massive engine when compared to the "small-block" Chevrolet engine. It had a dry weight of approximately 665 pounds (302 kg), depending on

3864-604: Is obtained at the drive wheels and thus takes into account drivetrain power loss of the transmission, driveshaft, and differential, as well as all accessories) does not equate to SAE net HP (which is horsepower at the flywheel, but with all essential peripherals included (such as the water pump, alternator, and air cleaner), accessories (such as a power steering pump, if fitted), a stock exhaust system, and all required emission controls, none of which are accounted for in SAE gross, which only measures gross flywheel horsepower). The RPO L89

4002-402: Is varied simply by adding or removing cutters." The first iteration of the W-series engine was the 1958 "Turbo-Thrust" 348-cubic-inch (5.7 L), originally intended for use in Chevrolet trucks but also introduced in the larger, heavier 1958 passenger car line. Bore and stroke was 4 + 1 ⁄ 8  in ×  3 + 1 ⁄ 4  in (104.8 mm × 82.6 mm), resulting in

4140-464: The 1963 Impala Sport Coupé , ordered under Chevrolet Regular Production Option (RPO) Z11. This was a special package created for drag racers , as well as NASCAR , and it consisted of a cowl-induction 427 cu in (7.0 L) engine and body with selected aluminum stampings. The aluminum body parts were fabricated in Flint, Michigan at the facility now known as GM Flint Metal Center. Unlike

4278-478: The Chevrolet Corvair , Ford Falcon and Plymouth Valiant ), the "full-size car" designation came into wider use. In the 1960s, the term was applied to the traditional car lines of lower-price brands, including Chevrolet, Ford, and Plymouth. As a relative term, full-size cars were marketed by the same brands offering compact cars, with entry-level cars for buyers seeking the roominess of a luxury car at

Chevrolet Impala - Misplaced Pages Continue

4416-670: The Chrysler LH cars (Dodge Intrepid, Eagle Vision, Chrysler Concorde/New Yorker/LHS). The same year, the Buick Roadmaster was introduced, becoming the first rear-wheel drive GM model line adopted outside of Chevrolet and Cadillac since 1985; the Chevrolet Impala was returned for the 1994 model year. The 1989 Lexus LS400 luxury sedan was the first Japanese full-size car sold in North America. Following

4554-583: The Dodge Monaco ). Developed by AMC before its acquisition by Chrysler, the Premier was a version of the front-wheel drive Renault 25 adapted for North America. The Saab 9000 took a special position at the end of the 1980s, as for a long time it was the only imported car to be classified as a "large car" by the EPA. From the 1980s to the 1990s, the market share of full-size cars began to decline; along with

4692-755: The H and C platforms . Only station wagons, the Chevrolet Caprice , and the Cadillac Brougham remained. Initially developed to replace the Ford LTD Crown Victoria, the 1986 Ford Taurus was produced alongside it as the Ford mid-size model line. After largely abandoning the full-size segment for compact cars and minivans, Chrysler gained reentry into the full-size segment in 1988 with the Eagle Premier (also produced as

4830-517: The eighth-generation Hyundai Sonata , is classified by the EPA as full-size despite being marketed as a mid-size model. In 2018, the three highest-selling cars in the full-size sedan category in the United States were the Dodge Charger, Chevrolet Impala, and Chrysler 300. The large car segment has been declining in the United States accounting for 3.6% of new vehicle sales in 2021, down from 6.6% in 2016. The models in this category included

4968-456: The "Super Turbo-Thrust", produced 280 hp (209 kW). A "Special Turbo-Thrust" upped the power output to 305 hp (227 kW) with a single large four-barrel carburetor. Mechanical lifters and Tri power brought the "Special Super Turbo-Thrust" up to 315 hp (235 kW). For 1959 and 1960, high-output versions of the top two engines were produced with 320 hp (239 kW) and 335 hp (250 kW) respectively. In 1961, power

5106-503: The #2-selling convertible in the US in 1966, with 38,000 sold; it was beaten by the Mustang by almost 2:1. 1966 saw a pair of enlarged big-block V8s featuring 427 cu in (7.0 L). The RPO L36 was rated at 385 hp (287 kW), the L72 at 425 hp (317 kW). The L72 was only available with a manual transmission. The 1966 Impala was a mild restyle of the 1965, featuring

5244-447: The 122.15 mph (196.58 km/h) trap speed indicated low 11-second ET (elapsed time) potential (e.g. with larger drag slicks) and suggested something on the order of 495 hp (369 kW), "as installed", in that modified configuration. This large difference in power suggests that the OEM exhaust manifolds and exhaust system were highly restrictive in the ZL1 application, as was also

5382-456: The 1920s to the 1950s, most manufacturers produced model lines in a single size, growing in size with each model redesign. While the length and wheelbase varied between model lines, width was a relatively constant dimension, as the American federal government required the addition of clearance lights on a width past 80 inches. In 1960, following the introduction of compact cars (such as

5520-558: The 1950s, and have become increasingly common since the downsizing of full-sized cars in the 1980s. The lineage of mass-produced full-size American cars begins with the 1908 Ford Model T . In 1923, General Motors introduced the Chevrolet Superior , becoming the first vehicle to adopt a common chassis (the A-body ) for several brands. Compared to the cars of the 21st century, these vehicles are small in length and width. From

5658-464: The 1958–1960 models. Sport Coupe models featured a "bubbleback" roof line style for 1961, and a unique model, the 2-door pillared sedan, was available for 1961 only. It was rarely ordered. A "Super Sport" (SS) option debuted for 1961. This was also the last year the top station wagon model would have the Nomad name. Power brakes were $ 43. The 1962 model featured new "C" pillar styling for all models except

Chevrolet Impala - Misplaced Pages Continue

5796-436: The 1970 racing season posted a best-of-season trap speed of 106.76 mph (172 km/h), which suggests something on the order of 350 "as installed" (SAE Net) HP for a 3,900 pounds (1,769 kg) car-and-driver combination. Indeed, Super Chevy Magazine conducted a chassis dyno test of a well-documented, well tuned, but stock 1970 LS-6 Chevelle and recorded 283 peak HP at the wheels – a figure that lines up quite well with

5934-562: The 1973 models. In keeping with their huge size, these new "B" body Chevrolets were close to Cadillac in luxury features, styling, and ride. Like all GM "B" bodied cars, Impala got a new power ventilation system that remained on while the ignition was on, and included both large vents in the instrument panel and louvers in the trunk. However, the system proved to be problematic and was disliked by many buyers. Power assisted front disc brakes were standard for all models for 1971; variable-ratio power steering became standard in 1972. The 1972 model has

6072-496: The 1996 model year, GM ended production of large rear-wheel drive sedans. By 2000, with the sole exception of the Ford Crown Victoria, Mercury Grand Marquis, and Lincoln Town Car, full-size cars had abandoned rear-wheel drive and body-on-frame construction. Instead of model lineage, the EPA "large car" definition of over 120 interior cubic feet was widely used. Initially developed for the midsize Oldsmobile Aurora ,

6210-446: The 348 cu in (5.7 L) V8 engines available with 305 hp (227 kW; 309 PS), 340 hp (254 kW; 345 PS), and 350 hp (261 kW; 355 PS) or the new 409 cu in (6.7 L) V8, which in 1961 was rated at 360 hp (268 kW; 365 PS). Unlike all other years, the 1961 Super Sport package was available on any Impala, including sedans and station wagons (the sales brochure shows

6348-607: The 396, 402, and 454 short-deck big-blocks. The 396 cu in (6.5 L) V8 was introduced in the 1965 Corvette as the L78 option and in the Z-16 Chevelle as the L37 option. It had a bore × stroke of 4.094 in × 3.760 in (104 mm × 95.5 mm), and produced 375 bhp (380 PS; 280 kW) at 5600 rpm and 415 lb⋅ft (563 N⋅m) of torque at 3600 rpm. The solid lifter version

6486-399: The 4-door hardtop. Sport Coupe models now featured the "convertible roof" styling, shared with other GM "B" full-size hardtop coupe, which proved popular. The "overhang" roof style of the sedans was replaced with a wider "C" pillar with wraparound rear window. Engine choices for 1962 began as previously with 1962 being the final year for the 235 I6. along with the small-block 283 fitted with

6624-510: The 409 engine was announced along with the Impala SS (Super Sport) model. The initial version of the engine produced 360 hp (268 kW) with a single 4-barrel Carter AFB carburetor. The same engine was upped to 380 hp (283 kW) in 1962. A 409 hp (305 kW) version of this engine was also available, developing 1 hp per cubic inch with a dual four-barrel aluminum intake manifold and two Carter AFB carburetors. It had

6762-488: The Chevrolet Nomad model. However, unlike the passenger cars, Impala wagons had dual-unit taillights. The 1963 Impala featured rectilinear styling with an engine-turned aluminum rear taillight panel surrounded by a chrome border on SS models. Engine choice was similar to 1962, with the small-block 283 cu in (4.6 L) and 327 cu in (5.4 L) V8s most popular. The Stovebolt six-cylinder engine

6900-516: The Chrysler 300, Dodge Charger, Nissan Maxima, and Toyota Avalon. They have been discontinued after the 2023 or 2024 model years. The trend in the large car market segment in United States is toward the SUV. Chevrolet big-block engine#348 Chevrolet had introduced its popular small-block V8 in 1955, but needed something larger to power its medium duty trucks and the heavier cars that were on

7038-818: The Five Hundred was renamed the Taurus. After the 2011 model year, Ford ended production of the Panther platform, shifting to the Ford Taurus and Lincoln MKS; in 2017, the latter was replaced by the Lincoln Continental . In 2011, General Motors ended production of the G-body for several chassis (with Cadillac later shifting its largest sedans to rear-wheel drive). In 2012, the Tesla Model S became

SECTION 50

#1732782524761

7176-626: The Flint GM plant. For 1964, the Impala was restyled to a more rounded, softer look. The signature taillight assembly had an "upside-down U" shaped aluminum trim strip above the taillights, but the individual lights were surrounded by a body-colored panel. The 409 cu in (6.7 L) V8 engine returned as the big-block option, as well as dual four-barrel (four-choke) Carter AFB carburetors , which produced 425 bhp (431 PS; 317 kW) at 6,000 rpm and 425 lb⋅ft (576 N⋅m) at 4,200 rpm of torque . SS models continued to feature

7314-744: The GM G-body chassis was expanded into the full-size segment for Cadillac in 2000 (for the Deville, later the DTS) and adapted by Buick (the Lucerne) in 2006. For the 2005 model year, Chrysler replaced the LH cars with the LX cars (returning to rear-wheel drive). The same year, Ford introduced the Five Hundred, its first front-wheel drive full-size car (the first American full-size car offered with all-wheel drive); in 2008,

7452-531: The GM Tonawanda Engine plant for auto production, and 20 partial engines were made for replacement/over-the-counter use. There is no evidence from GM that shows 57 cars were built. The so-called Mystery Motor, known internally as the Mark II or Mark IIS, is a race-only engine produced for the 1963 season. Development began with a 409 cu in (6.7 L) version (Mark II) and ended with

7590-515: The Impala concept car featured hardtop styling. Clare MacKichan 's design team, along with designers from Pontiac , started to establish basic packaging and dimensions for their shared 1958 General Motors "A" body in June. The first styling sketch that directly influenced the finished Chevrolet automobile was seen by General Motors Styling Vice President Harley Earl in October. Seven months later,

7728-490: The Impala was reintroduced again as a mainstream front-wheel drive car. In February 2014, the 2014 Impala ranked No. 1 among Affordable Large Cars in U.S. News & World Report ' s rankings. When the 10th generation of the Impala was introduced for the 2014 model year, the 9th generation was rebadged as the Impala Limited and sold only to fleet customers through 2016. During that time, both versions were sold in

7866-535: The Italian Iso Grifo . This engine was identical to the 425 hp (317 kW) L72 427 (first introduced in 1966), but was fitted with 3×2-barrel Holley carburetors , known as " Tri-Power ," in lieu of the L72's single 4-barrel carburetor. Both engines used the same high-lift, long-duration, high-overlap camshaft and large-port, cast-iron heads to maximize cylinder head airflow (and, hence, engine power) at elevated engine-operating speeds. Consequently,

8004-406: The L72 and L71. In 2011, Super Chevy Magazine conducted a chassis dynamometer test of a well documented, production-line, stock but well-tuned L-72 "COPO" Camaro, and recorded a peak 287 hp (214 kW) at the rear wheels, demonstrating the substantial difference between 1960s-era SAE "gross" horsepower ratings and horsepower at the wheels on a chassis dynamometer. Wheel horsepower (which

8142-499: The LS-5 remained, when SAE net power ratings and the move towards emission compliance resulted in a temporary output decline, due to lowered compression, to about 270 hp (201 kW) and 468 lb⋅ft (635 N⋅m). The 1973 LS-4 produced 275 hp (205 kW) and 468 lb⋅ft (635 N⋅m), with 5 hp (4 kW) and 10 lb⋅ft (14 N⋅m) gone the following year. Hardened valve seats further increased reliability and helped allow these engines to last much longer than

8280-563: The MK III was a regular MK II design with a larger bore, but the Tonawanda plant didn't want to cast a block with a bore that large. The rumor that Packard's V8-engine tooling and production rights were considered for purchase by Chevrolet, was evidently true but never came to fruition. The Mark III was supposed to be a Mark II with bigger bore centers, but it never left the drawing board due to high tooling costs. The Mark IV differed from

8418-555: The SS427, was available. The Super Sport was known as Regular Production Option (RPO) Z03, from 1962 to 1963, and again in 1968. From 1964 through 1967, the Super Sport was a separate model, with its own VIN prefix (for example in 1965–67 cars, 164 was the prefix for a regular Impala with a V8 engine, 166 or 168 were used in 1966–68 for a V8-equipped Impala SS). Super Sports from 1962 to 1964 came with engine-turned aluminum trim, which

SECTION 60

#1732782524761

8556-470: The United States and Canada. The 10th-generation Impala was also sold in the Middle East and South Korea. The Impala name was first used for the full-sized 1956 General Motors Motorama show car that bore Corvette -like design cues, especially the grille. It was named Impala after the graceful African antelope, which was used as the car's logo. Painted emerald green metallic, with a white interior,

8694-552: The United States and is used for cars larger than mid-size cars . It is the largest size class for cars. In the United Kingdom, this class is referred to as the executive car , while in Europe, it is known as E-segment or F-segment . The United States Environmental Protection Agency (EPA) Fuel Economy Regulations for 1977 and Later Model Year (dated July 1996) includes definitions for classes of automobiles. Based on

8832-467: The United States. All new full-size Chevrolets eschewed the "X" frame for a full-width perimeter frame, a new body that featured curved, frameless side glass (for pillarless models), sharper angled windshield with newly reshaped vent windows, and redesigned full-coil suspension. In 1965, Chevrolet introduced a new luxury package for the Impala four-door hardtop, called "Caprice" and coded as RPO Z18. Caprices received tufted upholstery, wood grained accents on

8970-488: The W-series design were the race-proven Moraine M400 aluminum bearings first used in the 409, and the highly efficient "side oiling" lubrication system, which assured maximum oil flow to the main and connecting rod bearings at all times. Later blocks intended for performance use had the main oil gallery moved up to the cam bearing bore area and provided "priority main" oiling, improving the oil system even further. The 366 cu in (6.0 L) big-block V-8 gasoline engine

9108-400: The W-series engine in the placement of the valves and the shape of the combustion chambers. The chamber-in-block design of the W-series engine (which caused the power curve to drastically dip above 6500 rpm), was replaced by a more conventional wedge chamber in the cylinder head, which was now attached to a conventional 90 degree deck. The valves continued to use the displaced arrangement of

9246-423: The W-series engine were capable of operating at speeds well beyond 6000 rpm . The combustion chamber of the W-series engine was in the upper part of the cylinder , not the head, the head having only tiny recesses for the valves. This arrangement was achieved by combining a cylinder head deck that was not perpendicular to the bore with a crowned piston , which was a novel concept in American production engines of

9384-419: The W-series engine, but were also inclined so that they would open away from the combustion chamber and cylinder walls, a design feature made possible by Chevrolet's stud mounted rocker arms. This alteration in valve placement resulted in a significant improvement in volumetric efficiency at high RPM and a substantial increase in power output at racing speeds. Owing to the appearance of the compound angularity of

9522-544: The W-series engine. The cylinder block, although more substantial in all respects, used the same cylinder bore spacing of 4.84 in (123 mm) with a larger 2.75 in (70 mm) main bearing dimension, increased from the 2.5 in (63.5 mm) of the older engine. Like its predecessor, the Mark IV used crowned pistons, which were castings for conventional models and impact extruded ( forged ), solid skirt types in high performance applications. Also retained from

9660-413: The W-series was no longer needed, and wide, rectangular covers were used. In all forms (except the aluminum ZL-1), the Mark IV was slightly heavier than the W-series model, with a dry weight of about 685 lb (311 kg). Aside from the new cylinder head design and the reversion to a conventional 90 degree cylinder head deck angle, the Mark IV shared many dimensional and mechanical design features with

9798-577: The application. There were smooth running versions with hydraulic lifters suitable for powering the family station wagon , as well as rough-idling, high-revving solid lifter models usually applied to a minimally equipped, plain-looking, two-door Biscayne sedan fitted with the 425 hp (317 kW) version of the 427 (RPO L72 ). Perhaps the ultimate 427 for street applications was the 435 bhp (441 PS; 324 kW) at 5800 rpm and 460 lb⋅ft (624 N⋅m) at 4000 rpm of torque L71 version available in 1967 to 1969 Corvettes, and in

9936-436: The base V8 was the carryover 283 cu in (4.6 L), at 185 hp (138 kW). Optional were a 283 cu in with 290 hp (220 kW) and 348 cu in (5.7 L) V8 up to 335 hp (250 kW). Standard were front and rear armrests, an electric clock, dual sliding sun visors, and crank-operated front vent windows . A contoured hooded instrument panel held deep-set gauges. A six-way power seat

10074-494: The basic design was developed. For 1958, GM was promoting its 50th year of business, and introduced anniversary models for each brand; Cadillac, Buick, Oldsmobile, Pontiac, and Chevrolet. The 1958 models shared a common appearance on the top models for each brand; Cadillac Eldorado Seville, Buick Limited Riviera, Oldsmobile Starfire 98, Pontiac Bonneville Catalina, and the Chevrolet Bel-Air Impala. The Impala

10212-413: The body. "SS427" badges were also installed in the interior of the 1968 model only. Approximately 2,000 Z24 cars were built for each model year 1967 and 1968 (slightly more in 1967, less in 1968), and slightly more than 2,400 were built in 1969. The 1969 models were unique in several ways: Disc brakes were standard that year (optional on other years) along with 15 inch wheels, and this was the only year that

10350-536: The cars had the name "Impala" anywhere on the body. Because "big block muscle" was now focusing on intermediate and even compact size cars, Chevrolet discontinued the Impala Super Sport series after 1969, although the 1970 model was still available with a big block V8 (now displacing 454 cubic inches), bucket seats, a center console with floor shifter. Redesigned in 1965, the Impala set an all-time industry annual sales record of more than 1 million units in

10488-507: The case with the similar L88. The then-staggering $ 4,718 cost of the ZL1 option doubled the price of the 1969 Corvette, resulting in just two production Corvettes (factory option at dealer) and 69 1969 Camaros (non-dealer option from factory – COPO 9560) being built with the ZL1. Chevrolet capitalized on the versatility of the 427 design by producing a wide variety of high-performance, "over-the-counter" engine components as well as ready-to-race "replacement" engines in shipping crates. Some of

10626-492: The clear reversing lenses, as red indicators were illegal. New Zealand models were assembled by General Motors New Zealand with bodies supplied from Canada already welded, painted and trimmed. The Impala remained Chevrolet's top-selling model with the fifth generation. A high-performance big block V8 was still available in the form of the Turbo-Jet 454, which produced 365 hp (272 kW) in 1971, but power decreased as

10764-574: The combined passenger and cargo volume, large cars (full-size cars) are defined as having an interior volume index of more than 120 cu ft (3.4 m ) for sedan models, or 160 cu ft (4.5 m ) for station wagons. From the introduction of the Ford Flathead V8 in the 1930s until the 1980s, most North American full-size cars were powered by V8 engines . However, V6 engines and straight-six engines have also been available on American full-size cars, especially until

10902-411: The components were developed to enhance the engine's reliability during high RPM operation, possibly justifying the use of the description "heavy duty." However, most of these items were racing parts originally designed for Can-Am competition that found their way onto dealers' shelves, and were meant to boost the engine's power output. Beginning in 1969, the highest performance 427 models were fitted with

11040-423: The dashboard and specialty pulls on the insides of the doors. This "halo" model also featured the "spinner" wheel covers from the Impala SS, with the "SS" logo centers replaced by a Chevrolet "bowtie" emblem. The Super Sport's blackout rear trim strip below the triple taillights was also used, with the "Impala SS" emblem replaced by a large "Caprice by Chevrolet" badge. The Impala block lettering on each front fender

11178-429: The day. As the piston approached top dead center , the angle of the crown combined with that of the head deck to form a wedge-shaped combustion chamber with a pronounced quench area. The spark plugs were inserted vertically into the quench area, which helped to produce a rapidly moving flame front for more complete combustion. The theory behind this sort of arrangement is that maximum brake mean effective pressure (BMEP)

11316-411: The dealerships on customer request. And more chrome trim outside, including a full-width aluminum-and-chrome panel to house the triple-unit taillight assembly. Super Sport (SS) models featured that panel in a special engine-turned aluminum, which was also used to fill the side moldings, making the SS more distinctive in appearance. The Impala also gained the top trim station wagon body design, in place of

11454-597: The door pillars. All 1973 Chevrolet vehicles featured a larger, shock-absorbing front bumper due to new federal mandates which required 5-mile-per-hour (8.0 km/h) impact protection. New taillights were mounted in the (still) conventional rear bumper. The convertible was moved upmarket to the Caprice Classic series. Tweaks to the suspension and frame gave better roadability, according to Chevrolet general manager John Z. DeLorean . Steering wheels and instrument panels were color-keyed to interior colors, as opposed to

11592-562: The drawing board. The big-block, which debuted in 1958 at 348  cu in (5.7  L ), was built in standard displacements up to 496 cu in (8.1 L), with aftermarket crate engines sold by Chevrolet exceeding 500 cu in (8.2 L). The first version of the "big-block" V8 Chevrolet engine, known as the W-series, was introduced in 1958. Chevrolet designed this engine for use in passenger cars and light trucks. This engine had an overhead valve design with offset valves and uniquely scalloped valve covers , giving it

11730-526: The earlier versions, even without the protection previously provided by leaded fuel . 1974 was the last year of the 454 in the Corvette, although the Chevelle offered it in the first half of the 1975 model year. It was also available in the full size Impala/Caprice through model year 1976. General Motors introduced EFI in 1987, which was found on GM C1500 SS, C/K2500, and C/K3500 trucks. The 454 EFI version

11868-402: The engine-turned aluminum trim. Rooflines were carried over from 1963 unchanged. Back-up lights were standard. All full-size 1964 Chevrolet station wagons received small rectangular taillight lenses mounted vertically, one for each side of the car. The Impala Super Sport became its own series this year instead of an option package. The 1964 model year is a staple of lowrider culture , and it

12006-400: The engines offered very similar performance and resulted in a car whose performance was described by one automotive journalist as "the ultimate in sheer neck-snapping overkill". Typical 2000s-era magazine road tests of Corvettes with the engine yielded 0-60 mph (97 km/h) in 5.6 seconds and 1 ⁄ 4 mile (402 m) in 13.8 second at 104 mph (167 km/h) range for both

12144-513: The first fully electric full-size car sold in North America. For the 2013 model year, the Chevrolet Impala became the final American-market full-size sedan sold with a front bench seat . By the mid-2010s, full-size cars began seeing a steep decline in sales in North America, with SUVs replacing much of the full-size segment. At the end of the decade, demand for sedans (of all sizes) shifted towards vehicles of other layouts, reducing or shuttering production of sedans entirely. In 2018, Ford announced

12282-400: The first model lines to see major change. While General Motors and Ford would reduce the exterior footprint of their full-size lines to that of their intermediates, AMC withdrew its Ambassador and Matador full-size lines (to concentrate on production of mid-size vehicles). To save production costs, Chrysler repackaged its intermediates using the erstwhile full-size names, moving on to exiting

12420-421: The foundry must retool every time a compression change is in order. The necessity of making special heads to provide a range of compression ratios and to permit attachment of accessory mountings for the various model applications is of serious concern to the manufacturing and service departments ... Inclining the top of the block to 16° and shaping the top of the piston like a gabled roof with a 16° angle resulted in

12558-402: The grille and horizontal taillights were in the rear bumper. The hardtop Sport Coupe got a new notchback roofline, replacing the "fastback" C-pillar from 1967 to 1968. Ventless front windows were used on all models. Chevrolet had a rudimentary "power vent" system featuring vents in the instrument panel. The ignition switch was moved from the instrument panel to the steering column, and when the key

12696-410: The high performance 409 and 427 engines had larger ports and valves than those used on the 348 and the base 409 passenger car and truck engines, but externally were identical to the standard units – but for the location of the engine oil dipstick, on the driver's side on the 348 and the passenger's on the 409/427. No satisfactory explanation was ever offered for why this change was made, but it did provide

12834-511: The increased use of mid-size cars, vans, and SUVs grew in use as family vehicles. Between 1960 and 1994, the market share of full-size cars declined from 65 to only 8.3 percent. From 1990 until 1992, both GM and Ford redesigned its full-size car lines for the first time since the late 1970s. For the 1992 model year, Chrysler introduced a new front-wheel drive full-size car line, replacing the Eagle Premier/Dodge Monaco with

12972-408: The later fully unitized body/chassis; the body structure was also strengthened in the rocker panels and firewall. However, this frame was not as effective in protecting the interior structure in a side-impact crash as a traditional perimeter frame. A coil spring suspension replaced the previous year's rear leaf springs, and an air-ride system was optional. A 283 cu in (4,640 cc) engine

13110-505: The later, second-generation 427, it was based on the W-series 409 engine, but with a longer 3.65 in (92.7 mm) stroke. A high-rise, two-piece aluminum intake manifold and dual Carter AFB carburetors fed a 13.5:1 compression ratio to produce an under-rated SAE gross 430 hp (321 kW) and 575 lb⋅ft (780 N⋅m). Fifty RPO Z11 cars were produced at the Flint GM plant . Extant GM Documents show 50 Z11 engines were built at

13248-408: The main oil galley was moved from near the oil pan to near the camshaft. Also the valvetrain became non-adjustable and the provisions for a mechanical fuel pump were eliminated. Cast aluminum valve covers were fitted in place of stamped steel covers, featuring a screw-in filler cap. Structural changes were carried out to the cylinder case to improve the integrity of the bores and the inlet manifold

13386-522: The matte black used in 1971–1972. The steering wheel rim got a soft-feel grip, and replaced the "Impala" badge with generic "Chevrolet". The inline six-cylinder engine was now offered on the Bel Air 4-door sedan only, and only with the 3-speed manual transmission. Interiors had repositioned front seats for more legroom. The Impala name returned for the Kingswood station wagon. Suspension and chassis design

13524-486: The most pronounced with the 1967–1968 models. In keeping with federal regulations, safety features were built into Impalas during the 1967 and 1968 model years, including a fully collapsible energy-absorbing steering column, side marker lights, and shoulder belts for closed models. The L72 engine was not available in 1967, but the L36 Turbo-Jet V8 was optional. GM adopted a new lock system for all models, replacing

13662-467: The necessary accessories and drive system to adapt them to marine propulsion. Mercury Marine , in particular, was a major user of the Mark IV in marine drives, and relabeled the engines with their corporate logo. For 1991, General Motors made significant changes to the big-block resulting in the Generation V. The block received a one-piece rear seal and all blocks received 4-bolt mains. Additionally

13800-454: The new open (vs. closed) chamber cylinder heads, along with design improvements in crankshafts, connecting rods, and pistons, adopted from the Can-Am development program. Chevrolet gave all 427 engines except the ZL1 a torque rating of 460 lb⋅ft (624 N⋅m). Applications: 427 production codes: For 1970, the big-block was expanded again, to 454 cu in (7.4 L), with

13938-412: The number 13 car, driven by Johnny Rutherford , finished four laps down (in ninth place), with the top five cars being the heavier 1963 Ford Galaxie 500's. This "secret" engine was a unique design incorporating aspects of both the W-series and the mid-1965 introduced Mark IV, referred to in sales literature as the "Turbo-Jet V8". Richard Keinath, the original Mark II and IV design engineer stated that

14076-443: The number-one production spot in this recession year. As part of a GM economy move, the 1959 Chevrolet Impala was redesigned to share bodyshells with lower-end Buicks , Oldsmobiles , and Pontiacs . Using a new X-frame chassis, the roof line was 3 inches lower, bodies were 2 inches wider, the wheelbase was 1-1/2 inches longer, and curb weight increased. Flattened tailfins protruded outward, rather than upward. The taillights were

14214-589: The open combustion chamber aluminum heads finally were in production and began being fitted to the L88 and ZL1 engines. The ZL1 engine also featured a lightweight aluminum water pump, a camshaft that was slightly "hotter" than the L88's, and a specially tuned aluminum intake manifold. Like the L88, the ZL1 required 103 octane (RON) (minimum) fuel (102 octane RON [Sunoco 260] represented the highest octane gasoline sold at common retail stations), used an unshrouded radiator, and had poor low-speed idle qualities – all of which made

14352-557: The previous system that had been in use since 1936 with letter-coded keys that changed each year. The 1968 model was facelifted with a new front end. The new rear bumper housed triple "horseshoe" shaped taillights. 1968 also saw a new Impala model, the Custom Coupe. This two-door hardtop featured the same formal roofline as the Caprice Coupe. It was successful and would be continued through 1976. The L72 "427 Turbo-Jet" engine

14490-454: The previously referenced 350 SAE Net HP figure. An even more powerful version, producing 465 hp (347 kW) and 610 lb⋅ft (827 N⋅m), of the 454, then dubbed LS-7 (not to be confused with the modern, mid 2000s, 7-litre Chevrolet Corvette engine that powered the C6 Z06, which is an LS7). Several LS-7 intake manifolds were individually produced and sold to the general public by

14628-422: The previously referenced 376 hp (280 kW) SAE Net figure. Super Stock and Drag Racing Magazine recorded an 11.62 second/122.15 mph (196.58 km/h) 1 ⁄ 4 mile (402 m) in a professionally tuned ZL1 Camaro with open long-tube S&S equal-length headers, drag slicks, and minor suspension modifications, driven by drag racing legend Dick Harrell. Using Patrick Hale's Power/Speed formula,

14766-549: The rear bumper. Canadian buyers got the choice of a lower priced companion to the Impala Sport Coupe, the Bel Air Sport Coupe, which used the same body but featured Bel Air trim. Right-hand drive cars were manufactured in Canada for export to countries such as Australia, New Zealand, South Africa, and the United Kingdom, until 1969. They used a version of the 1965 Impala dash panel—without provision for

14904-524: The sales of all Ford-branded passenger cars (except for the Mustang ) would end in North America by 2022. General Motors announced the closure of several manufacturing facilities in the United States and Canada, with the production of the Chevrolet Impala and Buick LaCrosse ending in 2020. As of 2022, full-size cars from Asian manufacturers include the Lexus LS , Genesis G80 / G90 , Nissan Maxima , and Toyota Avalon . Another car from an Asian manufacturer,

15042-535: The segment in 1981. During the 1980s, manufacturers further reduced the exterior footprint of several model lines from the full-size segment into the mid-size class to comply with more stringent CAFE standards. With the 1982 model year, Chrysler exited the full-size segment entirely, with the mid-size Dodge Diplomat and Plymouth Gran Fury serving as its largest sedan lines. Following the 1985 model year, General Motors replaced most of its full-size rear-wheel-drive model lines with smaller front-wheel drive sedans on

15180-411: The side moldings, as well as bright rocker moldings and dummy rear-fender scoops. The standard perimeter-type frame was abandoned, replaced by a unit with rails laid out in the form of an elongated "X". Chevrolet claimed that the new frame offered increased torsional rigidity and allowed for a lower placement of the passenger compartment. This was a transitional step between traditional construction and

15318-484: The smaller cars while at the same time labeling it "Turbo-Jet 400" in the full-size cars. Power rating(s) by year: Applications: 396 and 402 production codes: The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes. The bore was increased to 4 + 1 ⁄ 4  in (108 mm), with power ratings varying widely depending on

15456-402: The steering wheel. Impala wagons got triple-unit taillights for the first time. A special 427 cu in (7.0 L) version of the 409 cu in (6.7 L) engine was used in the 1963 Chevrolet Impala Sport Coupe, ordered under Chevrolet Regular Production Option (RPO) Z11. This was a special package created for drag racers and NASCAR and included a 427 with aluminum body parts and

15594-464: The two engines largely unsuitable for street use. As impressive as the ZL1 was in its day, actual engine dyno tests of a certified production line stock ZL1 revealed 376 hp (280 kW) SAE net with rated output swelling to 524 hp (391 kW) SAE gross with the help of optimal carb and ignition tuning, open long tube racing headers, and with no power-sapping engine accessories or air cleaner in place. A second engine dyno test conducted on

15732-410: The type of intake manifold and carburetion systems present. It was 1.5 inches longer, 2.6 inches wider, and 0.84 inches shorter than the 283 "small-block". General Motors engineers explained, in 1959, reasons behind the combustion-in-block setup. Anticipating varied future compression ratios in future auto and truck use: "It was obvious that with the combustion chamber placed within the cylinder head,

15870-435: The valves, the automotive press dubbed the engine the "porcupine" design. As part of the head redesign, the spark plugs were relocated so that they entered the combustion chamber at an angle relative to the cylinder centerline, rather than the straight-in relationship of the W-series engine. This too helped high RPM performance. Due to the new spark plug angle, the clearance provided by the distinctive scalloped valve covers of

16008-569: The years went along. The 1971 redesigned B-body would be the largest car ever offered by Chevrolet. The hardtop Sport Coupe continued to be offered; it was a smoothly sloped semi-fastback reminiscent of the 1961 "bubbletop" styling. A three-speed manual transmission remained standard at the beginning of the year, but in the spring of 1971, all V8-equipped full-size GM cars received the Turbo Hydra-Matic as standard equipment. Powerglide remained optionally available for six-cylinder cars until

16146-510: Was a mirror image of the 1959 Chevrolet panel and shared with equivalent right-hand drive Pontiac models. Australian models were assembled by hand on the GMH Holden assembly lines. The Australian Impala was the first American post-war import to come standard with a V8 engine. The Impala was restyled on the GM B platform for the first time for 1961. The new body styling was more trim and boxy than

16284-485: Was a new option, as was "Speedminder," which allowed the driver to set a needle at a specific speed, which triggered a buzzer when exceeded. The 1960 Impala models reinstated three round taillights on each side, and a white band running along the rear fenders. Seven versions of the 283-cu in and 348-cu in V8s were offered: the carbureted 283 Turbo-Fire could have either 170 or 230 hp (130 or 170 kW). The 348

16422-484: Was again increased to 340 hp (254 kW) for the single four-barrel model, and 338 hp (252 kW) when equipped with Tri power. A 409 cu in (6.7 L) version was Chevrolet's top regular production engine from 1961 to 1965, with a choice of single or 2X4-barrel Rochester carburetors . Bore x stroke were both up from the 348 cu in (5.7 L) to 4.31 in × 3.5 in (109.5 mm × 88.9 mm). On December 17, 1960,

16560-493: Was an L71 fitted with aluminum heads. While this option produced no power advantage, it did reduce engine (and hence, vehicle) weight by roughly 75 pounds (34 kg). Although the difference in straight line performance was negligible, the weight savings resulted in superior vehicle weight distribution and improved handling and braking. The all-aluminum 1969 ZL1 version of the 427 engine was developed primarily for Can-Am racing, which did not require homologation to compete,; it

16698-573: Was available in 250 to 320 hp (190 to 240 kW) with a 350 hp (260 kW) Special Super Turbo-Thrust with triple two-barrel carburetors, 11.25:1 compression ratio, and dual exhausts. Fuel injection was no longer an option on full-size Chevrolets. New to the options list was cruise control . Production was 490,000 units. Right-hand drive cars were made in Oshawa, Ontario, Canada, for New Zealand, Australia, and South Africa and assembled locally from CKD or SKD kits. The right-hand drive dashboard

16836-408: Was capable of being operated in the upper 6000 rpm range, and when installed in the 1965 Corvette, was factory-rated at 425 hp (317 kW). Introduced in 1970, the 402 cu in (6.6 L) was a 396 cu in (6.5 L) bored out by 0.03 in (0.76 mm). Despite being 6 cubic inches (98 cc) larger, Chevrolet continued marketing it under the popular "396" label in

16974-450: Was discontinued early in the 1965 model year, so early-production 1965s got the 409, as well as 1/10 of 1% had the 396 CID big-block. Other later-built cars had the 396 cu in (6.5 L) as the big-block option. Two-speed Powerglide, as well as 3- and 4-speed manual transmissions were available. As with previous years, Impalas featured more chrome trim inside and out, with pleated tufted upholstery and door panels. The Impala would be

17112-660: Was introduced as a top-line Impala Sport Sedan for model year 1965, later becoming a separate series positioned above the Impala in 1966, which, in turn, remained above the Chevrolet Bel Air and the Chevrolet Biscayne . The Impala continued as Chevrolet's most popular full-sized model through the mid-1980s. Between 1994 and 1996, the Impala was revised as a 5.7-liter V8 –powered version of the Chevrolet Caprice Classic sedan. In 2000,

17250-427: Was introduced for the 1958 model year as a top-of-the-line Bel Air in 2-door hardtops and convertibles. From the windshield (A) pillar rearward, the 1958 Bel Air Impala differed structurally from the lower-priced Chevrolet models. Hardtops had a slightly shorter greenhouse and longer rear deck. The wheelbase of the Impala was longer than the lower-priced models, although the overall length was identical. Interiors held

17388-405: Was modified for better roadability. The bench front seat position was modified to fit tall drivers more comfortably; shorter drivers found it less so. One thousand 1973 Impalas were built with an " Air Cushion Restraint System " (ACRS) that used an Oldsmobile instrument panel and unique steering wheel that contained both a driver and front passenger air bag. They were all four-door sedans painted in

17526-455: Was once again returned to the option list, a solid-lifter V8 rated at 425 hp (317 kW). It would continue to be available for both 1968 and 1969, replaced by the Turbo-Jet 454 for 1970. The 1969 Impala and other full-sized Chevrolets got new slab-sided bodies with a small "upsweep" at the rear quarter window, giving them a more formal appearance. It retained the 119-inch wheelbase from previous models. New front bumpers that wrapped around

17664-421: Was preserved and remains a witness to the ability of an American automaker to design life saving safety systems into cars without a government mandate. Notably, an ACRS-equipped Impala was used on the television series Seinfeld as Kramer's personal vehicle. No other examples are known as of this time. Full-size car Full-size car —also known as large car —is a vehicle size class which originated in

17802-421: Was rated from 230 hp (172 kW) to 255 hp (190 kW) and from 385 lb⋅ft (522 N⋅m) to 405 lb⋅ft (549 N⋅m) of torque. The 1991–1993 454SS made 255 horsepower at 4000 rpm and 405 lb-ft of torque at 2400 rpm thanks to dual 2.5" catalytic converters. All other versions, including the 1990 SS, made 230 horsepower at 3600 rpm and 385 lb-ft of torque at 1600 rpm through

17940-420: Was removed, the steering wheel and shift lever were locked. The 1969 model year Impala production topped Caprice production by 611,000 units. Impala station wagons were renamed Kingswood, a name which would continue through 1972. The similar 1970 Impala got a minor facelift featuring a more conventional under the grille bumper replacing the wrap-around unit used in 1969 along with new triple vertical taillights in

18078-521: Was replaced by a "blackout" trim strip in 1965 which ran under the taillights. While the Super Sport was for the most part an appearance package for the Impala, Chevrolet did see fit to offer a performance version in a special equipment and trim package that today is rare and valuable. This was Regular Production Option Z24, marketed as the SS 427. This package was available on any 1967–69 2-door Impala and it included Chevrolet's 427 cubic inch V8, F41 Sport Suspension, redline tires, and unique SS 427 badges on

18216-408: Was replaced by the 396 cu in (6.5 L) 375 hp (280 kW) Mark IV big-block engine. In addition, a 340 hp (254 kW) version of the 409 engine was available from 1963 to 1965, with a single 4-barrel cast iron intake mounting a Rochester 4GC square-bore carburetor, and a hydraulic-lifter camshaft. A special 427-cubic-inch (7.0 L) version of the 409 engine was used in

18354-516: Was replaced with "Caprice" script. The Caprice package was reintroduced as the Chevrolet Caprice Custom in 1966, taking the top position in the full-size Chevrolet lineup. Engine choices included the inline six-cylinder as well as the small-block and big-block V8s. A new three-range Turbo Hydra-Matic automatic transmission was optional for 396 cu in (6.5 L) V8. The old 409 cu in (6.7 L) "W" engine

18492-403: Was replaced with a new 230  cu in (3.8  L ) Turbo-Thrift six that used thinwall castings and would continue as the standard engine for Chevrolet cars through 1979. The Sport Sedan featured a new, creased roof line. A new "coved" instrument panel included simple indicator lights for hot and cold engine conditions. An optional factory tachometer was built into the dashboard, just above

18630-461: Was the formal-roof Custom Coupe. Beginning in 1972, all engines were designed to run on unleaded gasoline . 1972 saw the last Impala convertible; it sold 6,456 units, placing fourth with just under 9 percent of the market, right behind the Corvette 's 6,508 units sold, ahead of the Mustang 's 6,401 units sold. The power ventilation system was improved, and exit vents were moved from the trunk lid to

18768-574: Was the standard V8, with ratings of 185 hp (138 kW), 230 hp (170 kW), and 250 hp (190 kW) with optional Rochester Ramjet fuel injection. Two versions of Chevrolet's 348 cu in (5,700 cc) V8, its first big-block , were also optional, producing 250 hp (190 kW) with a single four-barrel carburetor and 280 hp (210 kW) with three two-barrels. In total, 55,989 Impala convertibles and 125,480 coupes were built representing 15% of Chevrolet production. The 1958 Chevrolet Bel Air Impala helped Chevrolet regain

18906-402: Was used in Chevrolet medium duty trucks and school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.The 366 used 4 rings on the pistons, as it was designed from the very beginning as a truck engine. The 366 was produced only as a tall-deck engine, with a deck 0.4 in (10 mm) taller than

19044-587: Was very successful in cars like the McLaren M8B . The ZL1 specifications were nearly identical to the production L88 version of the 427, but featured an aluminum block in addition to aluminum cylinder heads. The first Corvette with the RPO ZL1 engine package was built in early December 1968 and featured aluminum closed chamber heads shared with the L88. Both L88 and ZL1 optioned cars continued to be built with closed chamber heads until approximately March 1969, when

#760239